Bedienungsanleitung Sagem AXIUM HDD 45 (Seite 7 von 14) (Englisch)

61063

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

7.3.Configuration of computer sources

If a personal computer is used (PC or MAC), switch on your SAGEM

AXIUM™ Home Cinema Screen before the computer.

Press the MENU button, then choose "INSTALL" using the button

and validate with OK.

Choose "PC DATA" then validate with OK.

With this option, you can adjust the source coming from your PC in

VGA mode (PC1) or DVI (PC2). In DVI, only the horizontal and

vertical positions can be adjusted.

Horizontal position: press to move the picture to the left and

to move it to the right.

Vertical position: Press to move the picture to the top or

bottom.

Frequency: This allows you to adjust the frequency to that of your

computer's graphics card. When a flashing vertical bar appears,

use this function to adjust the frequency.

Phase: This allows finer synchronization with your computer's gra-

phics card. Use this tuning when an unstable or flashing picture

occurs.

Automatic mode: This allows you to adjust everything automatically

or not.

Resolutions accepted (DVI-D and VGA entries): To ensure that

the projection display is operating correctly with your computer

make sure that you configure the display mode of your graphics

card to a resolution lower than 1024 x 768.

NB: Optimum stability is achieved with a frequency of 60 Hz (consult the documentation for your PC to

configure it).

8. Day-to-day use

8.1. Picture adjustment

PERSONAL PICTURE TUNING

You can set and save your own parameters using the "USER"

mode.

CONTRAST, BRIGHTNESS, COLOUR, SHARPNESS, TINT

be adjusted according to your preferences using the

buttons .

The tone adjustment only applies to an NTSC video source.

The colour balance adjustment allows you to set the main picture

colour.

Adjust using .

PRESET PICTURE SETTINGS

You can choose your picture preference from the settings offered

using the buttons STANDARD CINEMA STUDIO

SPORT

Select the most suitable one for the programme you are viewing

and validate using the OK button.

Press the MENU button to exit and the BACK button to return to

the previous screen.

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

CHANNEL MAN.

EPG

HORIZONTAL

VERTICAL

FREQUENCY

PHASE

AUTO IMAGE

YES

PC DATA

AUDIO INSTALL.

Resolution (px) Frequency (Hz)

640 x 480 60

640 x 480 66

640 x 480 72

640 x 480 75

640 x 480 85

800 x 600 60

800 x 600 72

800 x 600 75

800 x 600 85

1024 x 768 60

1024 x 768 70

1024 x 768 75

1152 x 864 60

1152 x 864 70

1280 x 720 60

and

IMAGE OPTIONS

USER STANDARD CINEMA STUDIO SPORT

CONTRAST 50

TINT 50

NEUTRAL

BRIGHTNESS 50

COLOR 50

SHARPNESS 0

COLOR TEMP.

AUDIO INSTALL.

IMAGE OPTIONS

USER STANDARD

CINEMA

STUDIO

SPORT

AUDIO INSTALL.

and

RIGHT SIDE DOOR

7.2. Source configuration

Press the MENU key then select "INSTALL" using the button

and validate using OK.

If your code is not 0000, this screen is protected and you must

enter your code.

Select "SOURCES", then "CONFIG" and accept with OK.

This option allows you to select the sources used but only displays

them when you select sources in daily use.

Choose the connector to be configured ( / ).

Press the MENU button to exit.

VGA

OK STBY

V- V+

P- P+

AUDIO

CODE

CONFIG

MANAGER

AUTO

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

AUDIO INSTALL.

For each connector, you can:

• Validate connected equipment

Press the red key several times until "YES" (or "NO" for an unu-

sed connector) is displayed. Select "C+" if you have connected

your C+ decoder to SCART 2. In this instance, enter the C+ pro-

gramme number at once.

• Choosing a pre-programmed name

Press the green button several times (DVD, DVDR, C+, DEC,

MAG, GAMES).

• Choosing a personalized name

Press the yellow button to move to edit mode. Scroll through the

characters using the buttons . Go to the next character

us in g . Finally, press the yellow button to validate.

• Choosing a noise reducer

You can apply a noise reducer to some sources such as a video

player by scrolling through them by pressing the blue button

more than once (none "0", weak "1", medium "2", strong "3").

NB: You can display the selected channel at any

time by pressing the OK button.

INPUT

SCART 1

SCART 2

SCART 3

AV 4

AV 5

AV 6

PC 1

PC 2

SOURCE

YES

CHOOSE NAME

NAME

- - - - -

- -

- - - - - -

N°

N.R.

NAME N.R.

VIEW

HEADPHONES recommended for headphones.

Adjusting the headphones is covered in § 6.7.

PC1 IN recommended for the connection of a PC fitted

with a "VGA"

socket.A 3.5 mm audio jack socket allows you

to connect sound.

AV6 recommended when connecting a camcorder in

VHS, S-VHS, 8 mm, Hi-8 or digital DVC format.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagem AXIUM HDD 45 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info