Bedienungsanleitung Sagem PHOTOEASY155 (Seite 4 von 196) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

19586

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

- 1 -

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

NEDERLANDS

1WELCOME

You have just acquired a SAGEM PHOTO EASY 155 printer, and we thank you for choosing our

product. With this high quality printer you can get the most out of your digital photos. In a few

simple steps you can produce photo prints identical to those from a professional developer, for

your personal use or to share with friends and family.

The easy-to-follow steps in this user guide will walk you through:

1. Switching on your PHOTO EASY 155 printer

2. Printing photographs stored on a memory card

3. Printing photographs transferred from a camera in a GSM mobile phone

4. Installing the image processing software and printer driver on a PC

5. Maintenance and troubleshooting of your PHOTO EASY 155 printer

The CD-ROM included with your kit contains an additional guide with instructions for using the

image processing software and printer driver on your PC.

Safety instructions and recommendations

• Do not install your PHOTO EASY 155 printer in a humid room (bathroom, laundry, kit-

chen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be ope-

rated within an ambient temperature range of 10 °C to 35 °C.

• Do not install your printer in a location where there is a noticeable amount of dust floating

in the air. Such dust can degrade the print quality of your photos.

• Only the power supply provided with the printer should be used. Connect this to the mains

in accordance with the installation instructions in this user guide and the information on the

identification label affixed to the power supply (voltage, current, mains frequency). As a

precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the

230V power supply. They should be placed near the device and should be easily accessible.

• Never open the cover of the film cartridge compartment during printing. This could

break the film and cause printer malfunction.

• Only use SAGEM consumables, if not you are likely to damage the equipment and invali-

date the guarantee. To obtain the references of the consumables (Refer to paragraph Repla-

cement of consumables, page -23).

• The CE marking certifies that the product meets the main requirements of the European Par-

liament and Council directive 1999/5/CE on telecommunications terminal equipment,

regarding safety and health of users, and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.sagem.com category "sup-

port", or can be requested at the following address:

E - Customer relations department

4 rue du petit albi - 95800 Cergy Saint-Christophe - FRANCE

Liasse AZUR_GB.book Page 1 Mardi, 22. juin 2004 11:14 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagem PHOTOEASY155 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sagem PHOTOEASY155

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info