Bedienungsanleitung Saitek ST50 (Seite 1 von 2) (Englisch)

615636

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ENGLISH

1. LEARN ABOUT THE BASICS…

Thank you for purchasing Saitek’s new ST50 Joystick. With its ergonomically-designed

pistol grip and sculptured palm rest, this game controller will give you countless hours of

exciting, yet comfortable, game play! Moreover, since it was carefully developed to fit a

wide variety of hand sizes, it will probably feel like it was made especially for you! The

ST50 was designed for IBM PC and compatible systems, and will work with Windows

95/

98/Millennium-based games.

As shown under

Features and Controls,

this joystick boasts a thumb-controlled fire

button, conveniently located at the top of the grip, plus a fast-reacting and easily-acces-

sible finger trigger. You’ll also appreciate the smooth and fluid operation of the built-in

throttle. All these features add up to a joystick that’s perfectly suited for many different

adventures, including flight simulations, racing games, and so much more!

The instructions in this manual were designed to get you started quickly and easily.

Once you’ve gone through the initial setup for your new joystick, the games can begin!

2. …THEN DO THE CALIBRATION!

After setting up the ST50 as described under

Getting Connected,

you’ll need to cali-

brate the unit in Windows

95/98/Millennium, as described below.

a. Click on Start, and select Settings, then Control Panel.

b. Double-click the Game Controllers icon.

If any previously-loaded controllers appear

in the Game Controllers window, they should be removed before you add the ST50

as the active controller. To remove an existing device, highlight the controller by

clicking on it, and then click on Remove. Click on Yes to confirm.

c. Select Add under the General tab. Select the 3-axis, 2-button joystick option.

d. Click on OK, and you’re now back at the main Game Controllers window.

e. With the 3-axis, 2-button joystick highlighted, click on the Properties button to

open the Game Controller Properties dialog box.

f. Select Calibrate under the Settings tab, and follow the on-screen instructions. Make

sure that the Rudder/Pedals box is not selected.

Note that the throttle is used to

calibrate the third axis.

When the calibration procedure is complete, click on Finish.

g. Next, click on the Test tab to check out your calibration.

The joystick cursor should

move in all directions, and the button indicators should turn on when the button and

trigger are pressed. When the throttle is pushed all the way forward and pulled back

again, the third axis indicator in the center should go up and down.

h. After you’ve finished testing, quit by clicking on OK in the Test window, and OK in the

General window. Finally, close the Control Panel window. Now it’s time to load your

favorite game and start playing!

Note that the actual controls for the thumb button, trigger, and throttle are set within

each individual game. Check your game documentation for details.

3. HAVE QUESTIONS? HERE’S SOME HELP!

a. My computer is not recognizing the ST50 as an active controller. What’s

wrong?

• Check the cable connections. Turn off your computer, and unplug the joystick from

the computer’s game port. Then plug it back in, making certain that the connection

is snug.

• Are you using an extender cable or a Y-connector? Since these cables can

sometimes cause problems, we suggest that your ST50 be connected directly to

the game port.

• Be sure to remove any existing controllers before you install the ST50, as noted in

Section 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saitek ST50 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info