Bedienungsanleitung Salus HTR24 (Seite 2 von 2) (Englisch)

735234

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Product Compliance & Safety Information

Product Compliance

SALUS Controls hereby declares that the product complies with the essential

requirements of the following EC Directives: 2014/30/EU and 2011/65/EU. The

full text of the EU Declaration of Conformity is available at the following internet

address: www.saluslegal.com.

Safety Information

Use in compliance with safety regulations. The unit is to be used for the control of

room temperature inside the house.

Installation

This accessory must be ﬁtted by a competent person, and installation must

comply with the guidance, standards and regulations applicable to the city,

country or state where the product is installed. Failure to comply with the relevant

standards could lead to prosecution.

Note: All electrical installation work should be carried out by

a suitable qualiﬁed electrician or other competent person.

Product Description

Thank you for purchasing the SALUS HTR24 Thermostat. This thermostat is a

device that lets you customize the heating and cooling of your home as needed.

The HTR24 is an electronic room temperature controller which oﬀers key

advantages over conventional mechanical products:

The controller is easy to operate using the conventional backlit adjusting dial

and oﬀers you unique control convenience for heating applications of all types

thanks to the high quality device electronics.

We hope you enjoy our product.

Contents of the box

Manual Contents:

Box Contents

Introduction

Product Compliance and

Safety Information

Installation

User Interface

Status/LED indication

Installers notes

Warranty

Icons used in this manual:

Safety

Important info

Your beneﬁt

Fixing Screws

1 x Installer Manual

Dial Thermostat

Model: HTR24

INSTALLER MANUAL

SALUS Controls plc

SALUS House

Dodworth Business Park South,

Whinby Road,

Dodworth, Barnsley S75 3SP, UK.

Sales: T: +44 (0) 1226 323961

E: sales@salus-tech.com

Technical: T: +44 (0) 1226 323961

E: tech@salus-tech.com

www.salus-controls.com

SALUS Controls is a member of the Computime Group

Maintaining a policy of continuous product development SALUS Controls plc reserve the right to

change speciﬁcation, design and materials of products listed in this brochure without prior notice.

Issue Date: Dec 2015

00086/2

For PDF Installation guide please

go to www.salus-manuals.com

10. Technical Speciﬁcation

Model: HTR24

Voltage:

24VAC, +-10%, 50/60 Hz

Operating Performance:

230 V: 1,8 W

Temperature setback:

2°C-4°C

Span:

+/- 0,5°C

Calibration:

Yes, with jumper

Storage temperature:

-20°C to +60°C

Ambient temperature:

0 °C up to 45 °C

Degree of protection:

IP 30

CE conformity according to:

Class II ( EN60730 )

Housing material:

PC, V2

Color:

RAL 9010 pure white

Connection:

Screw terminal

Weight

90g net / 135g gross

Puls-wide-modulation:

(PWM)

Yes

Valve protection:

Heating and Cooling:

Cooling blocked:

Dimensions:

Yes

Yes, automatically Change Over on the CO terminal

Yes, with jumper

85mm*85mm*25mm

Warranty

SALUS Controls warrants that this product (HTR24) will be free from any

defect in materials or workmanship, and shall perform in accordance with

its speciﬁcation, for a period of ﬁve years from the date of installation.

SALUS Controls sole liability for breach of this warranty will be (at its option) to repair

or replace the defective product.

Customer Name: ......................................................................................................................................................

Customer Address: .................................................................................................................................................

............................................................................................................................................................................................

....................................................................................... Post Code: ...........................................................................

Tel No: .................................................................... Email: .......................................................................................

Engineers Company: ..........................................................................................................................................

Tel No: ...................................................................... Email: ....................................................................................

Instalation Date: ....................................................................................................................................................

Engineers Name: ...................................................................................................................................................

Engineers Signature: ...........................................................................................................................................

7. Protection Function

6. Thermostat Functions

NSB (Night SetBack) Function

NSB Mode depends on the NSB wired connection.

0V = NSB OFF

24V= NSB ON

The NSB signal is activated every 1 second. When the signal is received the

setpoint temperature will be set at ±2°C or ±4°C.

Heating and Cooling Selection

The Heating/Cooling function is determined by the CO terminal connection.

CO 0 V= Heat mode

CO 24V= Cool mode

Cooling Blocked function

Cooling Enabled:

Set the jumper on ON . The thermostat will run in normal cooling mode.

That means that it will open/close the actuators when necessary. The LED will be

BLUE when the cooling function is running.

Cooling Disabled:

Set the jumper on OFF . The actuator will be closed and the LED will

be oﬀ.

Heat cut o at high/low temperature:

When room temperature is over 36°C or under 4°C, all heating/cooling outputs

will be turned oﬀ.

Short cycle protection:

When Cooling Mode is enabled the minimum interval between Relay ON/OFF

is 3 minutes.

Valve Protection:

Set the jumper on ON to disable the function or on OFF to enable it. Turn on the

valve for 5 minutes every week to prevent the valve any damages on the valve.

Sensor Malfunction:

If the temperature sensor or temperature sensor compensation is open the LED

will ﬂash BLUE/RED alternatively.

If CO terminal is connected and the Heating Mode is ON, the PWM function

will be activated.

If CO terminal is disconnected and the Cooling Mode is ON the ON/OFF control

output will be activated.

HTR24 Thermostat

Gently remove front housing and

make the wiring connections.

2. Terminal Connection 4. Jumpers

1. Mounting the Thermostat 3. Switching Bridges

Note: You can wire the thermostat

directly to the KL06 24V Wiring

Center (purchased separately).

Wall mounting

For wall mounting, mark the correct

possition on the wall and mount the

rear case to the wall.

Install the HTR24 dial room thermostat at roughly 1.5m above ﬂoor

level. It should be mounted in a location where the thermostat is

easily accessible and away from direct sunlight. You can mount

the thermostat directly on the wall or you can install it on top of a

wall-box.

ACTUATOR

30ºC

E.G.

HEAT

PUMP

EXTERNAL

CLOCK

24VAC

30ºC

Diﬀerent features of the HTR24

can be switched On or OFF with

the jumpers. In order to do this

please follow the table below.

HTR 24 Switching Bridges

Switch

VP Valve protection feature

Pulse-Width-Modulation

NSB Function (2° or 4°)

Heating/Cooling

PWM

Feature

OFF

2°C

Enable Disable

4°C

The jumpers from 1 to 5 are representing the number of actuators that you can connect

to the thermostat.

After the actuators are mounted please move the jumper on the correct number (the

same as the number of actuators).

Depending on the amount of actuator used, please change the jumper position

accordingly to compensate the power consumption.

Salus HTR24 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Salus HTR24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info