Bedienungsanleitung Samson Expedition Pro XP 200 (Seite 5 von 60) (Deutsch, Englisch, Französisch, Spanisch)

629790

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

System Features

The Samson Expedition Pro system uses state-of-the art

technology to bring a revolutionary new degree of flex

ibility and portability to professional audio. Its main fea

tures include:

• A built-in telescoping handle and locking wheels that

make it easier than ever before to transport your audio

system.

• All Expedition Pro enclosures are lightweight and com

pact yet exceptionally durable and roadworthy.

Injection-molded with Polypropylene, they feature sub

stantial internal bracing to support a nearly 1/2" thick side

wall construction, making them strong and rigid enough

to allow maximum energy to be delivered to the sound

output. In addition, a steel grill and scuff-resistant

textured finish makes for a rugged speaker enclosure

that will deliver dependable performance in even

the most demanding environments.

• The low frequency section includes a custom designed

Kevlar-impregnated 12" low frequency driver with a

2.5" Kapton Former voice coil and 50 ounce barium fer

rite magnet for accurate and super-tight bass response.

• A high frequency section that delivers clear, sweet top

end thanks to its 1" compression driver with a specially

designed phenolic diaphragm, along with a phasing plug

for linear response and an elliptical wave guide horn

design that reduces nearly all sonic diffraction.

• A tilt position that allows the Expedition Pro to be used

as an onstage wedge monitor.

• Integral 1 3/8" pole-mount receptacle and convenient

fly points allow the Expedition Pro to be pole-mounted or

“flown” using standard PA hardware.

• The XP100 is a passive cabinet that can be used with any power amplifier rated at

up to 250 watts into 8 ohms. It requires no power and provides dual Speakon™

and 1/4" connectors that allow multiple XP100s to be daisy-chained where

extended coverage is required.

• The XP200 contains dual power amplifiers and an active crossover. Operating in

a biamped configuration, one power amp drives the low frequency section

with 150 watts of power and the other drives the high frequency section with

50 watts of power. The active crossover uses an advanced Linkwist-Riley constant

phase filter that provides a steep rolloff of 24 dB per octave to reduce sonic dis

tortion at the crossover frequencies. Dual balanced XLR connectors allow daisy-

chaining of multiple Expedition Pro enclosures, and a switchable limiter circuit

assures a clean output even when you’re pushing the XP200 to maximum levels.

In addition, there are three stages of speaker protection, including relay switching

for power on and off.

• The XP300 includes all the features of the XP200, and adds a flexible four-channel

stereo mixer that provides two monophonic and one stereo mic/line channels

with dual XLR and 1/4" connectors. In addition, separate dual phono connec

tors allow you to hook up an external cassette or CD player. Each mixer chan

nel includes two-band equalization and independent volume control,



SAMSON

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Expedition Pro XP 200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info