Bedienungsanleitung Samson L2000 (Seite 11 von 24) (Englisch)

624005

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Master Auxiliary Send Section

Each of the L Series AUX buses and the EFX bus have a

master control knob, which is used to adjust the overall

level of that AUX bus output.

24 - AUX 1 Master Send

The Aux 1 signals from mono and stereo input chan-

nels, along with the DSP returns are mixed together

and sent to the AUX 1 Output. Use the AUX 1 level

controls to set the amount of signal being sent to

Aux 1 Output.

Controls and Functions

24BIT DIGITAL EFFECT SECTION - continued

22 – TO AUX 2 - Effects Return Control

The TO AUX 2 control is used to adjust the level of the

effects from the built-in digital Multi-effect being that’s

being sent to the AUX 2 monitor bus. This allows you

to add the DSP effects to the signal in your monitor

speakers. Turn this knob up if you want to hear the effect

in the AUX 2 monitor mix.

23 - TO AUX 1 - Effects Return to Aux 1 control knob

The TO AUX 1 control is used to adjust the level of the

effects from the built-in digital Multi-effect that’s being

sent to the AUX 1 monitor bus. This allows you to add the

DSP effects to the signal in your monitor speakers. Turn

this knob up if you want to hear the effect in the AUX 1

monitor mix.

25 - AUX 2 Master Send

The Aux 2 signals from mono and stereo input chan-

nels, along with the DSP returns are mixed together

and sent to the AUX 2 Output. Use the AUX 2 level

controls to set the amount of signal being sent to

Aux 2 Output.

26 - AUX 3 Master Send

The Aux 3 signals from mono and stereo input chan-

nels, along with the DSP returns are mixed together

and sent to the AUX 3 Output. Use the AUX 3 level

controls to set the amount of signal being sent to

Aux 3 Output.

27 - EFX Master Send

The EFX signals from mono and stereo input chan-

nels, along with the DSP returns are mixed together

and sent to the internal DSP and the EFX Output.

Use the EFX level controls to set the amount of sig-

nal being sent to the internal DSP and the EFX Send

jack.

28 - STEREO RETURN – control knob

The L Series feature an additional STEREO RETURN input

that can be used to return the outputs of the an external

effects processor, or to connect the output of any stereo

line level device to the main mix

29 -CD/TAPE – control

The L1200 and L2000 have a dedicated line level CD/TAPE

LEVEL input to connect a CD, Tape or MP3 player. The

CD/TAPE Level control is used to adjust the volume of the

signal connected to the CD/TAPE input.

30-MUTE CHANNELS – switch

You can turn all the Mic/Line channels with a press of a

single button using the MUTE CHANNELS switch. This is

especially convenient when you take a break and want to

leave all the levels set so they are ready when you begin

to use your PA system again. The MUTE CHANNELS does

not turn off the stereo channels, and does not turn off the

CD/TAPE inputs. So, when the MUTE CHANNELS switch is

on, you still have stereo returns for a CD or MP3 player.

28 29 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson L2000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samson L2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info