TROUBLESHOOTING
Problem Possible cause Solution of the problem
No display LED on the
front panel;
No power supply
Receiver in deep standby mode;
Power cord not plugged in
correctly
Press the STANDBY button;
Power cord plug in correctly
No pictures on the screen
Receiver in Standby mode;
SCART not connected tightly
to video output of television;
incorrect channel or video
output selected on television
Set receiver to “On”;
Check connection;
Check channel and video output
(TV instruction manual)
No sound
SCART connected incorrectly;
Loudness level = 0;
Muting active
Check connection;
Increase loudness on television set;
Press the MUTE button
Remote Control does not
operate directly
Incorrect operation;
Batteries dead or inserted
incorrectly
Point remote control
towards the Receiver.
Replace batteries or insert correctly
Poor picture quality
signal strength in
Signal strength too low Check all wire connections.
On-Screen Error
Messages: “No signal
(check cable)”
cable not connected or not tight Check connection
On-Screen Error
Messages:
“Invalid Smart Cart”
“Please insert Smart Card”
Smartcard:
- not plugged in correctly;
- not plugged in.
(depend on model)
Check the Smartcard;
Insert the Smartcard.
- Some local networks may not support the digital broadcasting. If so, please contact with
corresponding networks.
- Bad weather can cause poor signal strength.
- There might be a difference in output mode, video image quality or video format
depending on TV brand.
DISPOSAL
The device, packaging material (e.g. Styrofoam) and the batteries must never be
disposed of with household refuse.
Please obtain appropriate information about the regulations in your community, and
dispose of all refuse in accordance with regulations at the separate locations provided.
