Bedienungsanleitung Samsung DSR9500A (Seite 16 von 18) (Englisch)

29584

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

DSR 9500A FTA, CI, EM VIA, VIA CI

GB-28

DIGITAL SATELLITE RECEIVER

DSR 9500A FTA, CI, EM VIA, VIA CI

GB-29

5. Common Interface

(Only for DSR 9500A VIA CI, DSR 9500A CI)

This STB is equipped with two PCMCIA slots,

which enable the use of two CI-CAMS.

When a Common Interface CAM is inserted inside

the PCMCIA slot,

the system detects the type of the CAM automatically

and display in the main menu.

On choosing this menu, you will be able to access

the different options available with the type of the

CAM like authorizations, pre-booking, package

details etc.,

SLOT A: You can see the Common Interface CAM’s name

which has been inserted.

SLOT B: "Not installed" is displayed when there is no CAM in slot.

6. Embedded Viaccess

(Only for DSR 9500A VIA CI, DSR 9500A EM VIA)

1. Change PIN code:

Change the PIN code of the Smartcard,

if necessary.

2. Change Parental Rating:

Change the setting for the family filter,

if necessary.

NNoottee

: This service is not offered by all channels.

3. Change Lock indicator:

You can change the lock status of the

Viaccess Smartcard.

4. Issuer Information:

Here you can call up all information stored on

the Smartcard by the publisher.

5. Authorization:

This option would indicate the authorization status

of the Smartcard.

4.6 System Information

If you have to contact your service provider or a service

center they might ask for information available from this menu.

Place the cursor on this sub menu and press key.

The following will be the on-screen display.

4.7 Software Upgrade

You can download and upgrade the software of this

STB through ASTRA, Sirius and Hotbird satellite when

the new software is released.

During downloading don’t turn off the STB.

If there is a new version of software to download,

you are asked if you will update or not.

If you press key, the update starts right away.

In case update is impossible, you get this message

"You can’t update software!" Or in case you don’t

need to update, "You don’t need to update software!"

will be displayed.

4.8 Copy Channel Data (Only for DSR 9500A CI, DSR 9500A FTA)

If you want to copy the channel data from one receiver

to another, please follow the instruction below.

Please make your own channel data, such as favorite

& lock channel with your own master box.

Then take your master box when you install another box.

1. Plug on both master & slave receivers

2. Master Box(Installed Box) : Stand-by Mode

3. Slave Box(Installing Box) : Menu Mode

4. Connect 2 Boxes with RS232 serial cable

(Both end should have male connector)

5. Select '4. System Setup'

6. Press '7' key on RCU

7. Press 'OK' to start channel data copy

NNoottee

: Use this function after removing SMART CARD or CAM modules.

OPERATING THE RECEIVEROPERATING THE RECEIVER

DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung DSR9500A Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info