Bedienungsanleitung Samsung HT-H4200R (Seite 16 von 152) (Englisch)

548336

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

16 English

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the

menu you selected.

Turn on your TV after connecting the product, and

then turn on the product. When you turn on the

product for the first time, the product automatically

displays the Initial Settings Language screen.

Move

Select

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

Press the ▲▼ buttons to select the desired

language, and then press the

button.

Press the

button to start function setup.

a Previous

Select

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

The TV Aspect screen appears. Press the ▲▼

buttons to select desired a TV Aspect ratio, and

then press the

button.

You have four choices:

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format and

4:3 pictures (the old, standard format) in 4:3 pillar

box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen

pictures in their original 16:9 format and expands 4:3

pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen

analogue TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in letter box format that retains

the 16:9 aspect ratio but puts black bars above and

below the picture.

4:3 Pan-Scan - For older, standard screen analogue

TVs. Displays 4:3 pictures in full screen and 16:9

pictures in Pan-Scan format that fills the screen, but

cuts off the left and right sides of the picture and

enlarges the middle vertically.

5 .

The Network - Wired screen appears.

- If you have a network with dynamic IP addresses

- and most people do - select Auto, press the

button, and then go to Step 6.

- If you have a network with static IP addresses,

we suggest you select Skip by pressing the

BLUE (D) button, and then go to "Configuring

Your Network Connection" on page 20 after you

have completed the initial setup. "Configuring

Your Network Connection" provides a full

explanation of how to configure your network

connection manually.

- If you have no network, select Skip by pressing

the BLUE (D) button. The Initial Settings

Complete screen appears, and then the Home

screen appears.

| NOTES |

If you skip network setup here or the setup does

not work correctly, you can go to "Configuring Your

Network Connection" on page 20 to set up the

product's network connection later.

a Previous d Skip

Move

Select

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Auto

Manual

The product verifies the network connection and

then connects to the network. When it is done,

press the

button. The Initial Settings Complete

screen appears, and then the Home screen

appears.

Start

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-H4200R Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info