Zoom out
Zoom in
Vorherige Seite
1/66
Nächste Seite
LCD TV
LE37 M8
LE40M8
LE40N8
LE46M8
LE46N8
LE52M8
Owners Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01186A-01
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
REPUBLIC OF IRELAND 0818 717 100
www.samsung.com/uk
U.K 0870 SAMSUNG (7267864) www.samsung.com/uk
BN68-01186A-Eng-Cover.indd 1 2007-03-13 �� 11:28:55
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    LCD TV
    LE37 M8
    LE40M8
    LE40N8
    LE46M8
    LE46N8
    LE52M8

    Contact SAMSUNG WORLD-WIDE
    If you have any questions or comments relating to Samsung products,
    please contact the SAMSUNG customer care centre.
    Country
    REPUBLIC OF IRELAND
    U.K

    Customer Care Centre
    0818 717 100
    0870 SAMSUNG (7267864)

    Web Site
    www.samsung.com/uk
    www.samsung.com/uk

    Owner’s Instructions
    Before operating the unit,
    please read this manual thoroughly,
    and retain it for future reference.

    ON-SCREEN MENUS
    PC DISPLAY
    PICTURE IN PICTURE (PIP)
    TELETEXT
    BN68-01186A-01

    BN68-01186A-Eng-Cover.indd 1

    Register your product at www.samsung.com/global/register
    Record your Model and Serial number here for future reference.
    ▪ Model _______________ ▪ Serial No. _______________

    2007-03-13 �� 11:28:55



  • Page 2

    Precautions When Displaying a Still Image
    A still image may cause permanent damage to the TV screen.
    WARNINGS:
    Image retention, commonly known as screen burn-in, can occur on most types of television if the same
    image is displayed continuously. The most common causes of image retention are logos that remain
    stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
    To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
    settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
    ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
    to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
    borders and fit the picture to the entire area of the screen. Using a video game console may cause
    image retention and is not recommended. When using a PC input, avoid displaying still images for long
    durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
    IMPORTANT:
    Image retention issues are not covered by your Samsung® warranty.
    • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
    retention. This image retention is also known as "screen burn".
    To avoid such image retention, reduce the degree of brightness and contrast of the screen when
    displaying a still image.

    Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders

    displayed on the left, right and center of the screen caused by the difference of light

    emission on the screen. Playing a DVD or a game console may cause a similar effect to the

    screen. Damages caused by the above effect are not covered by the Warranty.
    • Displaying still images from Video games and PC for longer than a certain period of time may produce
    partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still
    images.
    © 2007 Samsung Electronics Co., Ltd. All rights reserved.

    BN68-01186A-Eng-0309.indd 1

    2007-03-13 �� 11:24:14



  • Page 3

    Contents
    Connecting and Preparing Your TV
     List of Parts......................................................... 3
     Installing the Wall Mount Kit................................ 3
     Viewing the Control Panel................................... 4
     Viewing the Connection Panel............................ 5
     Viewing the Remote Control................................ 7
     Installing Batteries in the Remote Control........... 8
     Switching On and Off.......................................... 8
     Placing Your Television in Standby Mode........... 8
     Plug & Play.......................................................... 9

    Setting the Channels
     Storing Channels Automatically........................ 10
     Storing Channels Manually................................11
     Setting the Channel Lists.................................. 12
     Activating the Child Lock................................... 12
     Sorting the Stored Channels............................. 13
     Assigning Channels Names.............................. 13
     Fine Tuning Channel Reception........................ 14
     LNA (Low Noise Amplifier)................................ 14

    Setting the Picture
     Changing the Picture Standard......................... 15
     Adjusting the Custom Picture............................ 15
     Changing the Colour Tone................................ 16
     Activating Backlight........................................... 16
     Configuring Detailed Settings on the Picture.... 17
     Changing the Picture Size................................. 18
     Freezing the Current Picture............................. 19
     Selecting the Screen Mode............................... 19
     Resetting the Picture Settings to the
    Factory Defaults................................................ 19
     Digital NR / Active Colour / DNIe / Movie Plus 20
     Viewing the Picture In Picture (PIP).................. 21
     HDMI Black Level.............................................. 22

    Setting the Sound
     Changing the Sound Standard.......................... 22
     Adjusting the Sound Settings............................ 23
     Setting the TruSurround XT (SRS TS XT)......... 23
     Connecting Headphones................................... 24
     Selecting the Sound Mode................................ 24
     Adjusting the Volume Automatically.................. 24
     Selecting the Internal Mute............................... 25
     Listening to the Sound of the Sub Picture......... 25
     Resetting the Sound Settings to the Factory
    Defaults............................................................. 26

    Setting the Time
     Setting and Displaying the Current Time........... 26
     Setting the Sleep Timer..................................... 27
     Switching the Television On and Off
    Automatically..................................................... 27

    Function Description
     Choosing Your Language.................................. 28
     Using Game Mode............................................ 28
     Setting the Blue Screen Mode / Selecting the
    Melody . ............................................................ 29
     Setting the Home Theater PC........................... 29
     Setting the Light Effect (LE40N8 LE46N8)......... 30
     Using the Energy Saving Feature..................... 30
     Selecting the Source......................................... 31
     Editing the Input Source Names....................... 31

    English - 1

    BN68-01186A-Eng-0309.indd 1

    2007-03-13 �� 11:24:14



  • Page 4

    USING The DTV FeATuRe

    Using the Teletext Feature

     Previewing the DTV Menu System................... 32
     Updating the Channel List Automatically........... 33
     Updating the Channel List Manually................. 33
     Editing Your Favourite Channels....................... 34
     Selecting Channel List...................................... 36
     Displaying Programme Information................... 36
     Viewing the EPG
    (Electronic Programme Guide) Information....... 37
     Using the Scheduled List.................................. 38
     Setting the Default Guide.................................. 38
     Viewing All Channels and
    Favourite Channels........................................... 39
     Adjusting the Menu Translucency..................... 40
     Setting up the Parental Lock............................. 40
     Setting the Subtitle............................................ 41
     Setting the Subtitle Mode.................................. 41
     Selecting the Audio Format............................... 41
     Selecting the Digital Text . ................................ 42
     Selecting the Time Zone (Spain only)............... 42
     Viewing Product Information............................. 42
     Checking the Signal Information....................... 43
     Upgrading the Software.................................... 43
     Viewing Common Interface............................... 44
     Selecting the CI (Common Interface) Menu...... 44
     Resetting........................................................... 45
     Selecting the Preferred Language
    (Subtitle , Audio or Teletext).............................. 45
     Preference......................................................... 46

     Teletext Decoder............................................... 46
     Displaying the Teletext Information................... 47
     Selecting a Specific Teletext Page.................... 47
     Using Fastext to Select a Teletext Page........... 48
     Setting Up Your Remote Control....................... 48
     Remote Control Codes...................................... 49

    Setting the PC
     Setting up Your PC Software
    (Based on Windows XP)................................... 52
     Display Modes................................................... 52
     Setting the PC................................................... 53
     Wall-Mount Adjustment(LE40M8, LE46M8, LE52M8,
    LE40N8, LE46N8)(Sold separately)..................... 54

    About Anynet+
     What is Anynet+? ............................................. 55
     Connecting Anynet+ Devices............................ 55
     Setting Up Anynet+........................................... 56
     Scanning and Switching between Anynet+
    Devices............................................................. 56
     Recording.......................................................... 57
     Listening through a Receiver............................ 58
     Check Points before Requesting Service.......... 58

    Recommendations For Use
     Using the Anti-Theft Kensington Lock............... 59
     Troubleshooting: Before Contacting Service
    Personnel.......................................................... 59
     Technical and Environmental Specifications .... 60
     Warning! Important Safety Instructions............. 61
     Wiring the Mains Power Supply Plug
    (UK Only).......................................................... 62
     Warranty Card................................................... 62

    Symbol

    Press

    Important

    Note

    One-Touch
    Button

    English - 2

    BN68-01186A-Eng-0309.indd 2

    2007-03-14 �� 12:40:13



  • Page 5

    List of Parts
    Please make sure the following items are included with your LCD TV.
    If any items are missing, contact your dealer.

    Remote Control &
    Batteries
    (AAA x 2)

    Power Cord

    Cover-Bottom

     Owner’s Instructions

    Cleaning Cloth

     Registration Cards

    Registration Cards (Not available in all locations)
    The stand and stand screw may not be included depending on the model.

    Installing the Wall Mount Kit
    Wall mount items (sold separately) allow you to mount
    the TV on the wall.
    For detailed information on installing the wall mount,
    see the instructions provided with the Wall Mount items.
    Contact a technician for assistance when installing the
    wall mounted bracket.
    Samsung Electronics is not responsible for any damage
    to the product or injury to yourself or others
    if you elect to install the TV on your own.


    Remove the stand and cover the bottom hole with a
    cap and fasten with two screws.

    English - 

    BN68-01186A-Eng-0309.indd 3

    2007-03-13 �� 11:24:15



  • Page 6

    Viewing the Control Panel
    [LE37M8 LE40M8 LE46M8 LE52M8]
    1
    2
    3
    4

    76

    [LE40N8 LE46N8]

    5

    1 2 3

    4 6

    5

    5 7

    The product colour and shape may vary depending on the model.
    1







    SOURCE
    Toggles between all the available input
    sources (TV, Ext.1, Ext.2, AV, S-Video,
    Component, PC, HDMI1, HDMI2, HDMI3,
    DTV). In the on-screen menu, use this button
    as you use the ENTER/OK button on the
    remote control.

    4







    2





    MENU
    Press to see an on-screen menu of your TV’s
    features.
    In case of DTV mode, the DTV menu
    appears.

    6 (Power)

    Press to turn the TV on and off.

    3





    Press to decrease or increase the volume.
    In the on-screen menu, use the
    buttons as you use the  and  buttons on
    the remote control.





    Press to change channels.
    In the on-screen menu, use the

    buttons as you use the 5 and 6 buttons on
    the remote control.
    (Without the Remote Control, you can turn on
    the TV by using the Channel buttons.)

    5 Speakers

    7 Power Indicator

    Blinks and turns off when the power is on and

    lights up in stand-by mode.
    Remote Control Sensor
    Aim the remote control towards this spot on
    the TV.

    English - 

    BN68-01186A-Eng-0309.indd 4

    2007-03-13 �� 11:24:16



  • Page 7

    Viewing the Connection Panel
    1

    2

    3

    4

    5

    3

    6

    @

    !

    Power Input

    09

    8

    7

    The product colour and shape may vary depending on the model.
    Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
    When connecting an external device, match the colour of the connection terminal to the cable.
    1 Connecting Set-Top Box, VCR or DVD

    Connector
    Input
    Output
    EXT 1
    EXT 2

    Video

    Audio (L/R)

    RGB

    Video + Audio (L/R)
    Only TV or DTV output is available.
    Output you can choose.

    -Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
    2 Connecting AUDIO
    - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to

    corresponding audio in connectors on the Amplifier or DVD Home Theater.
    3 HDMI IN 1,HDMI IN 2, HDMI IN 3
    - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
    - No additional Audio connection is needed for an HDMI to HDMI connection.

    What is HDMI?
    - “High Definition Multimedia interface” allows the transmission of high definition digital video data
    and multiple channels of digital audio (5. 1 channels).
    - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
    (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
    has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
    multi - channel digital audio.

    The external devices that support lower versioned HDMI mode may not implement sound output
    for the TV with the latest HDMI version (HDMI 1.3).
    In this case, connect to HDMI IN 2 and DVI IN (HDMI 2) "R - AUDIO - L" on the back panel of the TV.
    Part of lower versioned HDMI cables may cause annoying flickers or no screen display.
    In this case use the cable that supports the latest HDMI version (HDMI 1.3).
    DVI IN (HDMI 2) (AUDIO R/L)
    - When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
    etc, make sure that it has been set to a compatible video output mode as shown in the table
    below. Failure to observe this may result in picture distortion, image breakup or no picture.
    - When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal.

    You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
    “R - AUDIO - L” terminal on DVI for sound output.

    English - 

    BN68-01186A-Eng-0309.indd 5

    2007-03-13 �� 11:24:17



  • Page 8

    Supported modes for HDMI/DVI and Component


    HDMI/DVI 50Hz
    HDMI/DVI 60Hz
    Component

    480i
    X
    X
    O

    480p
    X
    O
    O

    576i
    X
    X
    O

    576p
    O
    X
    O

    720p
    O
    O
    O

    1080i
    O
    O
    O

    1080p
    O
    O
    O

    4 Connecting an Aerial or Cable Television Network
    To view television channels correctly, a signal must be received by the set from one of the following
    sources:
    - An outdoor aerial / A cable television network / A satellite network
    5 Connecting CI (Common Interface) CARD
    - When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
    - The pairing information containing a telephone number, CI CARD ID, Host ID and other information
    will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
    service provider.
    - When the channel information configuration has finished, the message "Updating Completed" is
    displayed, indicating that the channel list is now updated.

    You must obtain a CI CARD from a local cable service provider.
    Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
    may cause damage to it.

    Insert the CI-Card in the direction marked on it.
    7 Connecting External A/V Devices
    - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
    Camcorder.
    - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
    sponding audio out connectors on the A/V device.
    - Headphone may be connected to the headphone output (6) on the rear of your set. While the
    head phone is connected, the sound from the built-in speakers will be disabled.
    8 Connecting Computer
    - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
    the Video Card of your computer.
    - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
    end to "Audio Out" of the sound card on your computer.
    9 DIGITAL AUDIO OUT (OPTICAL)
    - Connect to a Digital Audio Component.
    0 SERVICE
    - Service connection for qualified service engineer.
    - Auto Wall-Mount (Refer to page 54 )
    ! Connecting Component Devices (DTV/DVD)
    - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of

    your set and the other ends to corresponding component video out connectors on the DTV or DVD.
    - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
    to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your
    set.
    - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
    B-Y and R-Y or Y, Cb and Cr.
    - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
    to corresponding audio out connectors on the DTV or DVD.
    - This LCD TV displays its optimum picture resolution in 1080p mode.
    - This LCD TV displays its maximum picture resolution in 1080p mode.
    @ Kensington Lock
    - The Kensington lock (optional) is a device used to physically fix the system when used in a public
    place.
    - If you want to use a locking device, contact the dealer where you purchased the TV.
    - The place of the Kensington Lock may be different depending on its model.

    English - 

    BN68-01186A-Eng-0309.indd 6

    2007-03-13 �� 11:24:17



  • Page 9

    Viewing the Remote Control
    1 Selects a target device to be
    controlled by the Samsung
    remote control (TV, DVD,
    STB, CABLE, VCR)
    (Refer to page 49~51)
    2 Television Standby button
    3 Number buttons for direct
    channel access
    4 One/Two-digit channel
    selection
    5 It display "Channel List"
    on the screen.
    6 Selects the TV and DTV
    mode directly
    7 VCR/DVD Functions
    Rewind, Stop, Play/Pause,
    Fast/Forward
    8 Volume increase

    Volume decrease
    9 Temporary sound switch-off
    0 Menu display and
    change confirmation
    ! Returns to the previous
    menu
    # Electronic Program Guide
    (EPG) display
    $ Picture size selection
    % Sound effect selection
    ^ Adjusts 5 separate devices
    - TV, DVD, STB, CABLE, or
    VCR.
    & When pressing this button, a
    number of buttons on the
    remote control (e.g. Selects
    a target device, volume,
    channel buttons) light up
    for a few seconds and then
    turn off to save power. This
    function is to conveniently use
    the remote control at night or
    when dark.
    * Available source selection
    ( Previous channel
    ) DTV menu display
    a Records for Live
    Broadcasting
    (Anynet+ function only)
    (Refer to page 57)

    b P : Next channel
    P : Previous channel
    c Exit the OSD
    d Control the cursor in the
    menu
    e Use to see information on
    the current broadcast
    f Runs the Anynet view
    functions and sets up Anynet
    devices.
    g Colour buttons :
    Press to add or delete
    channels and to store
    channels to the favorite
    channel list in the “Channel
    List” menu.
    h Picture-In-Picture On / Off
    i Digital subtitle display
    j Picture effect selection
    k Picture freeze
    l When your remote does not
    work, change the batteries
    and press the "RESET"
    button for 2-3 seconds before
    use.
    Teletext Functions
    6 Exit from the teletext display
    0 Teletext index
    @ Alternately select Teletext,
    Double, or Mix.
    $ Teletext size selection
    * Teletext mode selection
    (LIST/FLOF)
    ( Teletext sub page
    b P : Teletext next page
    P : Teletext previous page
    c Teletext cancel
    e Teletext reveal
    g Fastext topic selection
    h Teletext hold
    j Teletext store

    The performance of the remote control may be affected by bright light.


    This is a special remote control for the visually impaired, and has Braille points on the Power,
    Channel, STOP, PLAY/PAUSE and Volume buttons.
    English - 

    BN68-01186A-Eng-0309.indd 7

    2007-03-13 �� 11:24:18



  • Page 10

    Installing Batteries in the Remote Control
    1. Lift the cover at the back of the remote control upward as shown in the

    figure.
    2. Install two AAA size batteries.
    Make sure to match the "+" and "–" ends of the batteries with the

    diagram inside the compartment.
    3. Replace the cover.
    Remove the batteries and store them in a cool, dry place if you won’t be

    using the remote control for a long time. The remote control can be used

    up to about 23 feet from the TV.

    (Assuming typical TV usage, the batteries last for about one year.)






    If the remote control doesn’t work, check the following:
    1. Is the TV power on?
    2. Are the plus and minus ends of the batteries reversed?
    3. Are the batteries drained?
    4. Is there a power outage, or is the power cord unplugged?
    5. Is there a special fluorescent light or neon sign nearby?

    Switching On and Off
    The mains lead is attached to the rear of your set.
    1. Plug the mains lead into an appropriate socket.

    The standby indicator lights up on the front of the set.
    2. Press the button on the front of the set.

    You also can press the POWER button or the TV/DTV button on the remote control to turn
    the TV on.

    The programme that you were watching last is reselected automatically.
    3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or


    button on the right side of the set.

    When you switch the set on for the very first time, you will be asked to choose language in
    which the menus are to be displayed.
    4. To switch your set off, press the POWER

    button again.

    Placing Your Television in Standby Mode
    Your set can be placed in standby mode in order to reduce the power consumption. The standby
    mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
    1. Press the POWER button on the remote control.

    The screen is turned off and a red standby indicator appears on the front of your set.
    2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or

    channel up/down ( / ) button again.
    Do not leave your set in standby mode for long periods of time (when you are away on holiday, for

    example).

    It is best to unplug the set from the mains and aerial. 

    English - 

    BN68-01186A-Eng-0309.indd 8

    2007-03-13 �� 11:24:19



  • Page 11

    Plug & Play
    When the TV is initially powered on, several basic settings
    proceed automatically and subsequently. The following
    settings are available.
    Any functions related to Digital TV (DVB) will only work in
    countries or areas where DVB-T (MPEG2) digital terrestrial
    signals are broadcasted. Please confirm with your local
    dealer if you can receive DVB-T signals. Although this TV set
    follows the DVB-T specification, maintaining compatibility with
    the future coming DVB-T digital terrestrial broadcasts is not
    guaranteed. Several functions may not be available in some
    countries.

    Plug & Play

    Start Plug & Play.
    OK
    Enter Exit

    1. Press the POWER button on the remote control.

    The message "Start Plug & Play" is displayed with "OK" selected.
    2. Select the appropriate language by pressing the ▲ or ▼ buttons.

    Press the ENTER/OK button to confirm your choice.
    3. Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER/OK button.

    We recommend setting the TV to Home mode for the best picture in your home environment.

    Shop mode is only intended for use in retail environments.

    If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
    press the Volume button and then hold down the MENU button for five seconds on the side
    panel of the TV.
    4. The message "Check antenna input." is displayed with "OK" selected.

    Press the ENTER/OK button.

    Please check that the antenna cable is connected correctly.
    5. Select the appropriate country by pressing the ▲ or ▼ button.

    Press the ENTER/OK button to confirm your choice.
    6. The message “Some DTV functions may not be available. Digital Scan” is displayed.
    Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER/OK button.
     Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
     No: Only an ATV search is performed.


    This function is supported for all countries except for the following 6 countries: the United
    Kingdom, Austria, France, Germany, Italy, Spain.

    7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.

    The channel search will start and end automatically.
    The DTV channel scan menu appears and the DTV channel is automatically updated.

    If the DTV channel is updated, the Source in the source list of the Input menu is automatically
    changed to DTV.
    After all the available channels are stored, the "Clock Set" menu appears.

    Press the ENTER/OK button at any time to interrupt the memorization process.

    For detailed descriptions about DTV channel update, refer to page 33 of this manual.
    After all the available digital channels are stored, the screen to select a time zone is displayed
    depending on the country.
    8. Press the ENTER/OK button.

    Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► buttons.

    Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ buttons.

    You can also set the hour and minute by pressing the number buttons on the remote control.
    9. Press the ENTER/OK button to confirm your setting.

     Language: Select your language.
     Country: Select your country.
     Auto Store: Automatically scans for and stores channels available in the local area.
     Clock Set: Sets the current time for the TV clock.
    English - 

    BN68-01186A-Eng-0309.indd 9

    2007-03-13 �� 11:24:19



  • Page 12

    If you want to reset this feature...

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ENTER/OK button again, to select "Plug & Play".
    3. The message "Start Plug & Play" is displayed.

    (Refer to page 9)

    Setup
    Plug & Play
    Language
    : English
    Time
    Game Mode
    : Off
    Blue Screen
    : Off
    Melody
    : Off
    PC
    Home Theater PC : Off
    More


    Move

    Enter










    Return

    Plug & Play

    Start Plug & Play.
    OK

    Enter

    - Storing Channels Automatically
    - Storing Channels Manually

    TV

    Return

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    LNA
    : Off



    Move

    Enter










    Return

    Storing Channels Automatically
    You can scan for the frequency ranges available to you (and availability depends on your country).
    Automatically allocated programme numbers may not correspond to actual or desired programme
    numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
    2. Press the ENTER/OK button to select "Country".
    3. Select the appropriate country by pressing the ▲ or ▼ button.

    Press the ENTER/OK button to confirm your choice.
    Even though you have changed the country setting in this menu, the country setting for DTV is not
    changed. Use the Plug & Play function to change the country setting for DTV.
    (Refer to page 9)
    4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.
    5. Press the ENTER/OK button.
    The TV will begin memorizing all of the available channels.
    Press the ENTER/OK button at any time to interrupt the memorization process and return to the

    "Channel" menu.
    6. After all the available channels are stored, the "Sort" menu appears.

    English - 10

    BN68-01186A-Eng-0309.indd 10

    2007-03-13 �� 11:24:20



  • Page 13

    Storing Channels Manually
    You can store up to 100 channels, including those received via cable networks.
    When storing channels manually, you can choose:
    Whether or not to store each of the channels found.
    The programme number of each stored channel which you wish to identify.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
    3. Press the ENTER/OK button to select "Programme".
    4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼

    button and then press the ENTER/OK button.

    You can also set a programme number by pressing number buttons on the remote control.
    5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.
    6. Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.
    7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
    8. Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.

    If there is an abnormal sound or no sound, re-select the sound system required.
    9.






    If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
    Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the  or 
    button. Press the  button to select channel.
    Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.
    Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
    You can also set a channel number by pressing number buttons on the remote control.

    10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".

    Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.
    11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
    12. Repeat steps 3 to 11 for each channel to be stored.
     Programme: Selects a program number for the channel.
     Colour System: Sets the colour supporting system.
     Sound System: Sets the sound supporting system.
     Channel: Selects a channel.
     Search: Scans for the frequency value for the channel.
     Store: Saves your settings.

    English - 11

    BN68-01186A-Eng-0309.indd 11

    2007-03-13 �� 11:24:20



  • Page 14

    Setting the Channel Lists
    Set the channels according to your preference.
    You can easily delete, add, or lock the channel you want.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the

    ENTER/OK button.

    Channel List
    P 1 C3
    1 / 10
    Prog.

    2. Press the ▲ or ▼ button to select "Channel Manager",

    then press the ENTER/OK button.

    C--

    1

    C3

    2

    BBC 1

    3 C74

    3. Press the ENTER/OK button again, to select "Channel

    List".
    4. Press the ► button to select "

    0

    4 C75
    5 C76

    " line.

    6 S3
    7 S4

    5. Press the ▲ or ▼ button to select the undesired channel,

    then press the ENTER/OK button to cancel.

    8 S6
    9 S7

    6. Repeat steps 5 for each channel to be selected or canceled

    Add

    7. Press the EXIT button to exit.
    "

    " is active when "Child Lock" is selected to "On".

    Lock

    Move

    Enter

    Page

    Return

    You can select these options by simply pressing the CH LIST
    button on the remote control

    Activating the Child Lock
    This feature allows you to prevent unauthorized users, such
    as children, from watching unsuitable programmes by muting
    out video and audio.
    Child Lock cannot be released using the buttons on the side.
    Only the remote control can release the Child Lock setting,
    so keep the remote control away from children.

    Channel Manager
    Channel List
    Child Lock
    :
    Off
    On

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Channel Manager",

    then press the ENTER/OK button.



    Move

    4. Press the ▲ or ▼ button to select "On" or "Off". Press the

    ENTER/OK button.

    0

    C--

    1

    C3

    2

    BBC 1

    5. Press the ▲ or ▼ button to select "Channel List",

    then press the ENTER/OK button.

    3 C74

    6. Press the ► button to select " " line.

    5 C76

    9. Press the EXIT button to exit.


    Select "On" or "Off" in "Child Lock" to easily turn the channels
    which selected on " " to be active or inactive.

    BBC1
    1 / 10

    Prog.

    8. Repeat steps 7 for each channel to be locked or unlocked.

    Return

    Channel Liat
    P 2 C4

    3. Press the ▲ or ▼ button to select "Child Lock", then press

    the ENTER/OK button.

    7. Press the ▲ or ▼ button to select the channels you want to

    lock, then press the ENTER/OK button.

    Enter

    4 C75
    6 S3
    7 S4
    8 S6
    9 S7
    Add

    Lock

    Move

    Enter

    Page

    Return

    English - 12

    BN68-01186A-Eng-0309.indd 12

    2007-03-13 �� 11:24:21



  • Page 15

    Sorting the Stored Channels
    You can exchange the numbers of two channels, in order to:

    TV


     Modify the numeric order in which the channels have
    been automatically stored.

     Give easily remembered numbers to the channels
    that you watch most often.
    1. Press the MENU button to display the menu. Press the ▲ or ▼

    button to select "Channel", then press the ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Sort", then press the

    ENTER/OK button.

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    LNA
    : Off



    Move

    Enter

    TV

    4. Press the ▲ or ▼ button to move to the position in which you

    would like to change and then press the ENTER/OK button.

    The selected channel is exchanged with the one
    previously stored to the chosen number.
    5. Repeat steps 3 to 4 for another channel to be sorted.

    Return

    Sort
    Prog.

    0
    1
    2
    3
    4


    3. Select the channel number that you wish to change by press

    ing the ▲ or ▼ button repeatedly. Press the ENTER/OK

    button.

    The selected channel number and name are moved to
    right side.












    Ch. Name

    C-
    C23
    C16
    C3
    S1

    Move

    Enter

    Return

    6. Press the EXIT button to exit.

    Assigning Channels Names
    Channel names will be assigned automatically when channel
    information is broadcast. These names can be changed,
    allowing you to assign new names.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the
    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Name", then press the

    ENTER/OK button.
    3. If necessary, select the channel to be assigned to a new

    name by pressing the ▲ or ▼ button. Press the ENTER/OK

    button.

    T
    he selection bar is displayed around the name box.
    4.

    To...

    Then...

    Select a letter, number or symbol

    Press the ▲ or ▼ button

    Move on the next letter

    Press the ► button

    Move back the previous letter

    Press the ◄ button

    Confirm the name

    Press the ENTER/OK button

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    LNA
    : Off


    Move

    TV

    Enter










    Return

    Name
    Prog.

    0
    1
    2
    3
    4



    Ch.

    C--
    C23
    C16
    C3
    S1


    Move

    Name
    ---------
    ------------Enter

    Return


    The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /
    Special characters ( -, space)
    5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
    6. Press the EXIT button to exit.

    English - 13

    BN68-01186A-Eng-0309.indd 13

    2007-03-13 �� 11:24:23



  • Page 16

    Fine Tuning Channel Reception
    Use fine tuning to manually adjust a particular channel for
    optimal reception.

    TV

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    LNA
    : Off

    1. Use the number buttons to directly select the channel that

    you want to fine tune.
    2. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the

    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Fine Tune", then press

    the ENTER/OK button.



    Move

    Enter










    Return

    Fine Tune

    4. Press the ◄ or ► button to adjust the fine tuning.

    Press the ENTER/OK button.
    P1

    5. Press the EXIT button to exit.



    Fine tuned channels that have been saved are marked with
    an asterisk "*" on the right-hand side of the channel number
    in the channel banner. And the channel number turns red.



    To reset the fine-tuning, select "Reset" by pressing the
    ▲ or ▼ button and then press the ENTER/OK button.

    0
    Reset


    Adjust

    Save

    Return

    LNA (Low Noise Amplifier)
    If the TV is operating in a weak-signal area, the LNA function
    can improve the reception (a low-noise preamplifier boosts
    the incoming signal).

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Channel", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "LNA", then press the

    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "On" or "Off".

    Press the ENTER/OK button.
    4. Press the EXIT button to exit.

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    LNA
    : Off



    TV

    Move

    Enter










    Return

    Channel
    Country
    : Belgium
    Auto Store
    Manual Store
    Channel Manager
    Sort
    Name
    Fine Tune
    Off
    LNA
    :
    On


    Move

    Enter

    Return

    English - 14

    BN68-01186A-Eng-0309.indd 14

    2007-03-13 �� 11:24:25



  • Page 17

    Changing the Picture Standard
    You can select the type of picture which best corresponds to
    your viewing requirements.

    TV

    1. Press the MENU button to display the menu.

    Press the ENTER/OK button, to select "Picture".
    2. Press the ENTER/OK button again, to select "Mode".
    3. Press the ▲ or ▼ button to select the desired picture effect.

    Press the ENTER/OK button.



    4. Press the EXIT button to exit.

    TV

     Dynamic: Selects the picture for high-definition in a bright
    room.
     Standard: Selects the picture for optimum display in a
    normal environment.
     Movie: Selects the picture for comfortable display in a
    dark room.





    Picture
    Mode
    : Dynamic 
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1 
    Detailed Settings 
    Backlight
    : 10 
    sMore

    The Picture mode must be adjusted separately for each input
    source.
    You can return to the factory defaults picture settings by
    selecting the "Reset".
    (Refer to "Resetting the Picture Settings to the Factory
    Defaults" on page 19)

    Move

    Enter

    Return

    Picture
    Dynamic
    Mode
    : Dynamic
    Standard 100
    Contrast
    Movie 50
    Brightness
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1
    Detailed Settings
    Backlight
    : 10
    sMore


    Move

    Enter

    Return

    You can also press the
    P.MODE button on the remote
    control to select one of the
    picture settings.

    Adjusting the Custom Picture
    Your set has several settings which allow you to control
    picture quality.
    1.


    2.


    TV

    To select the desired picture effect, follow the
    "Changing the Picture Standard" instructions number 1 to 3.
    Press the ▲ or ▼ button to select a particular item. Press the
    ENTER/OK button.

    3. Press the ◄ or ► button to decrease or increase the value of

    a particular item. Press the ENTER/OK button.

    Picture
    Mode
    : Dynamic 
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1 
    Detailed Settings 
    Backlight
    : 10 
    sMore


    Move

    Enter

    Return

    4. Press the EXIT button to exit.
     Contrast: Adjusts the lightness and darkness between objects and the background.
     Brightness: Adjusts the brightness of the whole screen.
     Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
     Colour: Adjusts the colours, making them lighter or darker.
     Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more

    natural look.
    The adjusted values are stored according to the selected Picture mode.
    In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
    “Tint” function is available only in “HDMI” and “Component” mode.

    English - 15

    BN68-01186A-Eng-0309.indd 15

    2007-03-13 �� 11:24:26



  • Page 18

    Changing the Colour Tone
    You can select the most comfortable colour tone to your
    eyes.

    TV

    1. To select the desired picture effect, follow the

    "Changing the Picture Standard" instructions number 1 to 3.

    (On page 15)
    2. Press the  or  button to select "Colour Tone", then press

    the ENTER/OK button.
    3. Press the  or  button to select the desired colour tone

    setting. Press the ENTER/OKbutton.
    4. Press the EXIT button to exit

    Picture
    Mode
    : Dynamic 
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1 
    Detailed Settings 
    Backlight
    : 10 
    sMore


    TV

     Cool2: Makes the colour temperature bluer than "Cool1"

    menu.
     Cool1: Makes whites bluish.
     Normal: Keeps whites white.
     Warm1: Makes whites reddish.
     Warm2: Makes the colour temperature redder than
    "Warm1" menu.

    Move

    Enter

    Return

    Picture
    Mode
    : Dynamic
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50 Cool 2 R50
    Colour Tone
    : Cool1
    Cool 1
    Detailed Settings
    Normal
    Backlight
    : 10
    Warm 1
    sMore
    Warm 2


    Move

    Enter

    Return

    The adjusted values are stored according to the selected Picture mode.
    When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

    Activating Backlight
    You can adjust the screen brightness by adjusting the LCD
    backlight brightness. (0~10)
    1. To select the desired picture effect, follow the

    "Changing the Picture Standard" instructions number 1 to 3.

    (On page 15)
    2. Press the ▲ or ▼ button to select “Backlight”, then press the

    ENTER/OK button.
    3. Press the ◄ or ► button to decrease or increase the value of

    a particular item.
    4. Press the ENTER/OK button.


    TV

    Picture
    Mode
    : Dynamic 
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1 
    Detailed Settings 
    Backlight
    : 10 
    sMore


    Move

    Enter

    Backlight

    Press the EXIT button to exit.



    Return

    10
    Adjust

    Return

    English - 16

    BN68-01186A-Eng-0309.indd 16

    2007-03-13 �� 11:24:28



  • Page 19

    Configuring Detailed Settings on the Picture
    You can set detailed picture settings.

    TV

    1. Press the MENU button to display the menu.
    2. Press the ENTER/OK button, to select "Picture".
    3. Press the ▲ or ▼ button to select "Detailed Settings", then

    press the ENTER/OK button.
    4.





    Select the required option by pressing the ▲ or ▼ button,
    then press the ENTER/OK button.
    Available options: Black Adjust, Dynamic Contrast, Gamma,
    White Balance, My Colour Control, Edge Enhancement,
    Colour Space

    5. When you are satisfied with your setting, press the

    ENTER/OK button.
    6. Press the EXIT button to exit.
    When the picture mode is set to Movie or Standard, Detailed
    Settings can be selected.

    Picture
    Mode
    : Movie 
    Contrast 100
    Brightness 50
    Sharpness 75
    Colour 55
    Tint
    G50
    R50
    Colour Tone
    : Cool1 
    Detailed Settings 
    Backlight
    : 10 
    sMore


    Move

    Enter

    Detailed Settings
    Black Adjust
    : Off
    Dynamic Contrast : Off
    Gamma
    : -3
    White Balance
    My Colour Control
    Edge Enhancement : Off
    Colour Space
    : Auto
    xvYCC
    : Off



    Move

    Enter

    Return










    Return

    If DNIe is Off, the Detailed Settings cannot be selected when
    the Picture mode is in Standard mode.
     Black Adjust: Off/Low/Medium/High

    You can directly select the black level on the screen to adjust the screen depth.
     Dynamic Contrast: Off/Low/Medium/High

    You can adjust the screen contrast so that the optimal contrast is provided.
     Gamma: -3 ~ 3

    You can adjust the middle brightness of pictures.

    Press the ◄ or ► button until you reach the optimal setting.








    White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
    You can adjust the color temperature for more natural picture colors.
    R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
    adjusted screen.
    Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
    Press the ◄ or ► button until you reach the optimal setting.
    Reset: The previously adjusted white balance will be reset to the factory defaults.








    My Colour Control: Pink/Green/Blue/White/Reset
    This setting can be adjusted to suit your personal preferences.
    Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
    Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
    Press the ◄ or ► button until you reach the optimal setting.
    Reset: The previously adjusted colours will be reset to the factory defaults.

     Edge Enhancement: Off/On

    You can emphasize object boundaries.
     Colour Space: Auto/Wide

    You can set the color reproduction space for the input signal to Auto or Wide.
     XVYCC : Off/On

    Setting the xvYCC mode to On increases detail and color space when watching

    movies from an external device (ie. DVD player) connected to the HDMI or

    Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.

    English - 17

    BN68-01186A-Eng-0309.indd 17

    2007-03-13 �� 11:24:29



  • Page 20

    Changing the Picture Size
    You can select the picture size which best corresponds to
    your viewing requirements.
    1. Press the MENU button to display the menu.

    Press the ENTER/OK button, to select "Picture".
    2. Press the ▲ or ▼ button to select "Size", then press the

    ENTER/OK button.
    3. Select the required option by pressing the ▲ or ▼ button.

    Press the ENTER/OK button.



    Move

    : Auto Wide
    : 16 : 9
    : Off
    : Off
    : Off
    : Off
    : OK
    Enter









    Return

    Size

    4. Press the EXIT button to exit.
     Auto Wide: Automatically adjusts the picture size to the "16:9"

    aspect ratio.
     16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
    wide broadcasting.
     Wide Zoom: Magnify the size of the picture more than 4:3.
     Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
    to fit the screen size.
     4:3: This is the default setting for a video movie or normal

    broadcasting.
     Just Scan: Displays the input scenes as they are without any
    cutoff when HDMI 720p,1080i, 1080p signals are
    input.


    Picture

    rMore
    Size
    Screen Mode
    Digital NR
    Active Colour
    DNle
    Movie Plus
    Reset


    "Auto Wide" function is available only in "TV", "Ext.1", "Ext.2",

    "AV", and "S-Video" mode.

    Auto Wide
    16 : 9
    Wide Zoom
    Zoom
    4:3
    Just Scan



    Move

    Enter

    Return

    You can select these options
    by simply pressing the P.SIZE
    button on the remote control.

    In PC Mode, only "16:9" and "4:3" mode can be adjusted.
    Zoom : Select
    by pressing the ◄ or ► buttons.
    Use the ▲ or ▼ button to move the picture up and
    down. After selecting , use the ▲ or ▼ button to
    magnify or reduce the picture size in the vertical direction.
    Wide Zoom : Move the screen up/down using the▲ or ▼ buttons after selecting the by pressing the ► or
    ENTER/OK button.

    English - 18

    BN68-01186A-Eng-0309.indd 18

    2007-03-13 �� 11:24:30



  • Page 21

    Freezing the Current Picture
    Press the STILL button to freeze a moving picture into a
    still one. Press again to cancel.

    Selecting the Screen Mode
    When setting the picture size to Auto Wide in a 16:9 wide TV,
    you can determine the picture size you want to see the 4:3
    WSS (Wide Screen Service) image or nothing. Each individual
    European country requires different picture size so this function is intended for users to select it.
    1. Press the MENU button to display the menu.

    Press the ENTER/OK button, to select “Picture”.
    2. Press the ▲ or ▼ button to select "Screen Mode", then press

    the ENTER/OK button.
    3.







    Select the required option by pressing the ▲ or ▼ button.
    Press the ENTER/OK button.
    Available options: 16:9, Wide Zoom, Zoom, 4:3
     16:9: Sets the picture to 16:9 wide mode.
     Wide Zoom: Magnify the size of the picture more than 4:3.
     Zoom: Magnify the size of the picture vertically on screen.
     4:3: Sets the picture to 4:3 normal mode.

    4. Press the EXIT button to exit.

    Picture

    rMore
    Size
    Screen Mode
    Digital NR
    Active Colour
    DNle
    Movie Plus
    Reset

    : Auto Wide
    : 16 : 9
    : Off
    : Off
    : Off
    : Off
    : OK

    Move Enter
    Move
    Enter











    Return
    Return

    Picture

    rMore
    Size
    : Auto Wide
    16:9
    Screen Mode
    : 16 : 9
    Wide Zoom
    Digital NR
    : Off
    Zoom
    Active Colur
    : Off
    4:3
    DNle
    : Off
    Movie Plus
    : Off
    Reset
    : OK



    Move

    Enter

    Return

    Picture Size is available in Auto Wide mode
    This function is not available in PC or Component, HDMI

    mode.

    Resetting the Picture Settings to the Factory Defaults
    You can return to the factory defaults picture settings.
    1. To select the desired picture effect, follow the

    "Changing the Picture Standard" instructions number 1 to 3

    on page 15.
    2. Press the ▲ or ▼ button to select "Reset", then press the

    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "OK" or "Cancel".

    Press the ENTER/OK button.

    Picture

    rMore
    Size
    Screen Mode
    Digital NR
    Active Colour
    DNle
    Movie Plus
    Reset


    Move

    4. Press the EXIT button to exit.

    : Auto Wide
    : 16 : 9
    : Off
    : Off
    : Off
    : Off
    : OK
    Enter









    Return

    Picture

    The "Reset" will be set for each picture mode.

    rMore
    Size
    Screen Mode
    Digital NR
    Active Colour
    DNle
    Movie Plus
    Reset


    Move

    : Auto Wide
    : 16 : 9
    : Off
    : Off
    : Off
    : Off
    : OK
    OK
    Cancel
    Enter

    Return

    English - 19

    BN68-01186A-Eng-0309.indd 19

    2007-03-13 �� 11:24:32



  • Page 22

    Digital NR / Active Colour / DNIe / Movie Plus
    If the broadcast signal received by your TV is weak, you can
    activate the Digital Noise Reduction feature to help reduce
    any static and ghosting that may appear on the screen.
    1. Press the MENU button to display the menu.

    Press the ENTER/OK button, to select “Picture”.
    2.




    Select the required option by pressing the ▲ or ▼ button,
    then press the ENTER/OK button.
    Available options: Digital NR, Active Colour, DNIe, Movie
    Plus.

    Picture

    rMore
    Size
    Screen Mode
    Digital NR
    Active Colour
    DNle
    Movie Plus
    Reset


    Move

    : Auto Wide
    : 16 : 9
    : Off
    : Off
    : Off
    : Off
    : OK
    Enter









    Return

    3. When you are satisfied with your setting, press the ENTER/OK button.
    4. Press the EXIT button to exit.
     Digital NR: Off/Low/Medium/High/Auto

    If the signal received by the television is weak, you can activate this feature to reduce any static and

    ghosting that may appear on the screen.

    This function is not available in PC mode.
     Active Colour: Off/On

    If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more

    vivid on-screen picture.








    This function is not available in PC mode.
    This function is not available in Movie and Standard mode.
    DNIe: Off/Demo/On
    This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
    can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
    applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
    you can view the difference in the visual quality.


    DNIeTM (Digital Natural Image engine)
    This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter,
    clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.



    This function is not available in PC mode.
    This function is not available in Movie mode

     Movie Plus: Off/On

    You can view more natural skin and clear text even in fast moving scenes.

    Use this function when watching movies.

    The Wide Zoom, Zoom and Just Scan mode is not supported.

    This function is not available in PC mode.

    English - 20

    BN68-01186A-Eng-0309.indd 20

    2007-03-13 �� 11:24:32



  • Page 23

    Viewing the Picture In Picture (PIP)
    You can display a sub picture within the main picture of set
    programme or video input. In this way, you can watch the
    picture of set programme or video input from any connected
    equipment while watching the main picture.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "PIP", then press the

    ENTER/OK button.
    3. Press the ENTER/OK button again.

    Press the ▲ or ▼ button to select "On", then press

    ENTER/OK button.

    If the PIP is activated, the size of the main picture turns

    to "16:9".

    Mode
    : Custom
    Setup
    Equalizer
    More
    SRS TS XT
    : Off

    Auto Volume
    : Off
    Energy
    : Off
    Internal Saving
    Mute
    : Off
    HDMI
    Black
    Level
    : Low
    Reset
    PIP

    Move Enter


    TV

    4. Press the ▲ or ▼ button to select "Source",then press

    ENTER/OK button. Select a source of the sub picture by

    pressing the ▲ or ▼ button and press the ENTER/OK

    button.

    The sub picture can serve different source selections

    based on what the main picture is set to.

    Move

    Return

    Enter

    Return

    Mode
    : Custom
    PIP
    Equalizer
    On
    PIP
    :: Off
    SRS TS XT
    Source
    : TV
    Auto
    : Off
    Size Volume
    :
    Internal Mute
    : Off
    Position
    :
    Reset
    Programme
    : P 1

    Move Enter


    Move





















    Return

    Enter

    Return

    5. Press the ▲ or ▼ button to select "Size" of the sub picture
    Press the PIP button on the

    and then press the ENTER/OK button. Select a size of the
    remote control repeatedly to acti
    sub picture by pressing the ▲ or ▼ button and then press the
    vate or deactivate the "PIP".

    ENTER/OK button.

    If main picture is in "PC" and “Component” mode, "Size" is

    not available.
    6. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.

    Select the position of the sub picture by pressing the ▲ or ▼ button and then press the

    ENTER/OK button.
    7. Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.

    You can select the channel that you want to view through sub picture by pressing the ▲ or ▼

    button. Press the ENTER/OK button.

    The "Programme" can be active when the sub picture is set to TV.
    8. Press the EXIT button to exit.


    You may notice that the picture in the PIP window becomes slightly unnatural when you use the
    main screen to view a game or karaoke.
     Source: Used to select a source of the sub picture.
     Size: Used to select a size of the sub picture.
     Position: Used to move the sub picture.
     Programme: Used to Change the sub picture.

    PIP Settings
    O: PIP operates, X: PIP doesn’t operate

    Main

    Sub

    Component
    HDMI
    PC

    TV analog
    O
    O
    O

    Ext.1
    O
    O
    O

    Ext.2
    O
    O
    O

    AV
    O
    O
    O

    S-Video Component
    X
    X
    X
    X
    X
    X

    HDMI
    X
    X
    X

    PC
    X
    X
    X

    TV digital
    X
    X
    X

    English - 21

    BN68-01186A-Eng-0309.indd 21

    2007-03-13 �� 11:24:33



  • Page 24

    HDMI Black Level
    You can directly select the black level on the screen to adjust
    the screen depth.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.

    Mode
    : Custom
    Setup
    Equalizer
    More
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Energy
    : Off
    Internal Saving
    Mute
    : Off
    HDMI
    Reset Black Level : Low
    PIP

    2. Press the ▲ or ▼ button to select "HDMI Black Level", then

    press the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Normal" or "Low", then

    press the ENTER/OK button.

    Move Enter


    TV

    4. Press the EXIT button to exit.
    This Function is active only when the externel input connects

    HDMI(RGB siginal).

    Move

    Enter

    Return
    Return

    Mode
    : Custom
    Setup
    Equalizer
    More
    SRS TS XT
    : Off

    Auto Volume
    : Off
    Energy
    : Off
    Internal Saving
    Mute
    : Off
    Normal
    HDMI
    Black
    Level
    :
    Low
    Reset
    Low
    PIP

     Normal: The screen gets brighter.
     Low: The screen gets darker.

    Move Enter


    Move

    Enter
















    Return
    Return

    Changing the Sound Standard
    You can select the type of the special sound effect to be used
    when watching a given broadcast.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ENTER/OK button again, to select "Mode".
    3. Select the required sound effect by pressing the ▲ or ▼

    button repeatedly and then press the ENTER/OK button.
    4. Press the EXIT button to exit.
     Standard: Selects the normal sound mode.
     Music: Emphasizes music over voices.
     Movie: Provides live and full sound for movies.
     Speech: Emphasizes voices over other sounds.
     Custom: Selects your custom sound settings.

    (Refer to "Adjusting the Sound Settings")

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    TV

    Enter








    Return

    Sound
    Standard
    Mode
    : Custom
    Music
    Equalizer
    Movie
    SRS TS XT
    : Off
    Speech
    Auto Volume
    : Off
    Custom
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    Enter

    Return

    English - 22

    BN68-01186A-Eng-0309.indd 22

    2007-03-13 �� 11:24:35



  • Page 25

    Adjusting the Sound Settings
    The sound settings can be adjusted to suit your personal
    preferences.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Equalizer", then press the

    ENTER/OK button.
    3. Press the ◄ or ► button to select a particular item.

    Press the ENTER/OK button.

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    TV

    Enter








    Return

    Equalizer

    4. Press the ▲ or ▼ button to reach the required setting.

    Press the ENTER/OK button.
    5. Press the EXIT button to exit.


    If you make any changes to these settings, the Sound Mode
    is automatically switched to "Custom".

    Balance 100Hz 300Hz 1kHz 3kHz 10kHz


    Move

    Adjust

    Return

    Setting the TruSurround XT (SRS TS XT)
    TruSurround XT is a patented SRS technology that solves
    the problem of playing 5.1 multichannel content over two
    speakers. TruSurround delivers a compelling,virtual surround
    sound experience through any two-speaker playback system,
    including internal television speakers. It is fully compatible
    with all multichannel formats.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "SRS TS XT", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "On" or "Off". Press the

    ENTER/OK button.
    4. Press the EXIT button to exit.
    TruSurround XT, SRS and
    symbol are
    trademarks of SRS Labs, Inc. TruSurround XT
    technology is incorporated under license from
    SRS Labs, Inc.

    TV

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    TV

    Enter








    Return

    Sound
    Mode
    : Custom
    Equalizer
    Off
    SRS TS XT
    : Off
    On
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    Enter

    Return

    English - 23

    BN68-01186A-Eng-0309.indd 23

    2007-03-13 �� 11:24:37



  • Page 26

    Connecting Headphones
    You can connect a set of headphones to your set if you wish to
    watch a TV programme without disturbing the other people in the
    room.
    When you insert the head set jack into the corresponding port, you
    can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
    Prolonged use of headphones at a high volume may damage your

    hearing.
    You will not receive sound from the speakers when you connect headphones to the system.
    The headphone volume and TV volume are adjusted differently.


    Selecting the Sound Mode
    You can set the sound mode by pressing the “DUAL” button.
    When you press it, the current sound mode is displayed on the
    screen.

    FM
    Stereo
    NICAM
    Stereo

    Audio Type
    Mono
    Stereo
    Dual
    Mono
    Stereo
    Dual

    DUAL 1/2
    MONO
    STEREO ↔ MONO
    DUAL 1 ↔ DUAL 2
    MONO
    MONO ↔ STEREO
    MONO ↔ DUAL 1
    DUAL 2

    Default
    Automatic
    change
    DUAL 1
    Automatic
    change





    You can also set these options
    simply by pressing the DUAL
    button on remote control.

    DUAL 1

    If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

    Adjusting the Volume Automatically
    Each broadcasting station has its own signal conditions, and
    so it is not easy for you to adjust the volume every time the
    channel is changed. This feature allows you to automatically
    adjust the volume of the desired channel by lowering the
    sound output when the modulation signal is high or by
    raising the sound output when the modulation signal is low.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Auto Volume", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "On" or "Off". Press the

    ENTER/OK button.
    4. Press the EXIT button to exit.

    TV

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    TV

    Enter








    Return

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Off
    On
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    Enter

    Return

    English - 24

    BN68-01186A-Eng-0309.indd 24

    2007-03-13 �� 11:24:38



  • Page 27

    Selecting the Internal Mute
    If you want to hear the sound through separate speakers,
    cancel the internal amplifier.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Internal Mute", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "On" or "Off". Press the

    ENTER/OK button.



    Move

    TV

    Enter








    Return

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Off
    Internal Mute
    : Off
    On
    Sound Select
    :
    Reset

    4. Press the EXIT button to exit.


    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset

    When "Internal Mute" is set to "On", the Sound menus except
    for "Sound Select" (in PIP mode) cannot be adjusted.



    Move

    Enter

    Return

    Listening to the Sound of the Sub Picture
    During the PIP features activation, you can listen to the sound
    of the sub picture.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Sound Select", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Sub".

    Press the ENTER/OK button.
    4. Press the EXIT button to exit.
     Main : Used to listen to the sound of the main picture.
     Sub : Used to listen to the sound of the sub picture.
    You can select this option when the “PIP” is set to “On”.

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Sound Select
    : Main
    Reset


    Move

    TV

    Enter








    Return

    Sound
    Mode
    : Custom
    Equalizer
    SRS TS XT
    : Off
    Auto Volume
    : Off
    Internal Mute
    : Off
    Main
    Sound Select
    : Main
    Sub
    Reset


    Move

    Enter

    Return

    English - 25

    BN68-01186A-Eng-0309.indd 25

    2007-03-13 �� 11:24:40



  • Page 28

    Resetting the Sound Settings to the Factory Defaults
    If Game Mode is On, the Reset Sound function is activated.
    Selecting the Reset function after setting the equalizer resets
    the equalizer setting to the factory defaults.

    TV

    Sound
    Mode
    : Custom 
    Equalizer 
    SRS TS XT
    : Off 
    Auto Volume
    : Off 
    Internal Mute
    : Off 

    Sound Select
    : Main
    Reset

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Sound", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Reset", then press the

    ENTER/OK button.



    Move

    Enter

    Return

    3. Press the EXIT button to exit.
    You can select this option when the "Game Mode" is set to "On".

    Setting and Displaying the Current Time
    You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set
    the time if you wish to use the automatic On/Off timers.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Time", then press the

    ENTER/OK button.
    3. Press the ENTER/OK button to select "Clock Set".
    4.

    To...

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 

    Auto Volume
    : Off 
    Time
    Internal
    Mute
    : Off
    Game Mode
    : Off 

    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    Month
    p
    01
    q
    Hour
    00

    Move to Month, Day, Year, Hour or Minute  or  button.
    Set the Month, Day, Year, Hour or Minute  or  button.
    Press the ENTER/OK button.




    Enter

    Return

    Clock Set

    Press the...



    5. Press the EXIT button to exit.

    Move

    TV

    Move

    Day

    Year

    01

    2007

    Minute
    00

    Adjust

    Return

    If you disconnect the power cord, you have to set the clock
    again.
    You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
    remote control.

    English - 26

    BN68-01186A-Eng-0309.indd 26

    2007-03-13 �� 11:24:41



  • Page 29

    Setting the Sleep Timer
    You can select a time period of between 30 and 180 minutes
    after which the television automatically switches to standby
    mode.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Time", then press the

    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Sleep Timer", then press

    the ENTER/OK button.

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 

    Auto Volume
    : Off 
    Time

    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    Move

    Enter

    TV
    Clock Set
    Sleep Timer
    Timer 1
    Timer 2
    Timer 3

    4. Press the ▲ or ▼ button repeatedly until the desired time

    appears (Off, 30, 60, 90, 120, 150, 180).

    Press the ENTER/OK button.

    Return

    Time
    Off
    30
    60
    90
    120
    150
    180

    :
    :
    :
    :
    :

    5. Press the EXIT button to exit.


    The TV automatically switches to standby mode when the
    timer reaches 0.



    Move

    Enter

    Return

    Switching the Television On and Off Automatically
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.

    TV

    2. Press the ▲ or ▼ button to select "Time", then press the

    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",

    "Timer 3", then press the ENTER/OK button.
    4. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ►

    button to move to the next step.

    Set other items using the same method as above.
    Yes/ No

    Press the ▲or▼ button

    Repeat

    Select a Once, Everyday,
    Mon-Fri, Mon-Sat, SatSun

    Press the ▲or▼ button

    Volume

    Adjust a 0~100

    Press the ▲or▼ button

    Programme

    Adjust a Programme

    Press the ▲or▼ button

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 

    Auto Volume
    : Off 
    Time
    Internal
    Mute
    : Off

    Game Mode
    : Off 
    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    TV

    Move

    Enter

    Return

    Timer 1
    On Time
    5
    00 :
    6
    Off Time
    00 :
    Repeat
    Once
    Programme
    01
    ► Move

    00
    00

    No
    No
    Volume
    10

    Adjust

    Return

    When finished, press the RETURN button to return.



    • The current time will appear every time you press the INFO button.
    • You can set the hour, minute, directly by pressing the number
    buttons on the remote control.

    5. Press the EXIT button to exit.

    English - 27

    BN68-01186A-Eng-0309.indd 27

    2007-03-13 �� 11:24:43



  • Page 30

    Choosing Your Language
    When you start using your set for the first time, you must
    select the language which will be used for displaying menus
    and indications.

    TV

    1. Press the MENU button to display the on-screen menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Language", then press

    the ENTER/OK button.
    3. Select a particular language by pressing the ▲ or ▼ button

    repeatedly.

    Press the ENTER/OK button.

    You can choose one of 17 languages.

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 

    Auto Volume
    : Off 
    Time
    Internal
    Mute
    : Off
    Game Mode
    : Off 

    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    TV

    4. Press the EXIT button to exit.

    Move

    Enter

    Return

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play
    SRS TS
    XT
    : Off 
    Language
    : English
    English
    Auto Volume
    : Off
    Time
    Deutsch 
    Internal
    Mute
    : Off
    Game Mode
    : Off
    Français 
    Reset
    Blue
    Screen
    : Off
    Italiano
    Melody
    : Off
    Español
    PC
    Nederlands
    Home Theater PC : Off
    q
    More
    Move Enter
    Return



    Move

    Enter

    Return

    Using Game Mode
    When connecting to a game console such as PlayStationTM or
    XboxTM, you can enjoy a more realistic gaming experience by
    selecting game menu.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Game Mode", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "On" or "Off". Press the

    ENTER/OK button.
    4. Press the EXIT button to exit.

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 
    Auto
    Volume
    : Off 

    Time

    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    TV

    Move

    Enter

    Return

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play
    SRS TS
    XT
    : Off 
    Language
    : English
    Auto
    Volume
    : Off 
    Time
    Internal
    Mute
    : Off
    Game Mode
    : Off Off 
    Reset
    Blue Screen
    : Off
    On
    Melody
    : Off
    PC
    Home Theater PC : Off
    More
    Move Enter
    Return

    To disconnect the game console and connect another
    external device, cancel game mode in the setup menu.
    If you display the TV menu in Game mode, the screen

    shakes slightly.

    Move
    Enter
    Return
    Game Mode is not available in TV mode.
    If Game Mode is On:

    • Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
    The user cannot change these to other modes.

    • Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

    • The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
    resets the equalizer setting to the factory defaults.


    English - 28

    BN68-01186A-Eng-0309.indd 28

    2007-03-13 �� 11:24:44



  • Page 31

    Setting the Blue Screen Mode / Selecting the Melody
    Blue Screen:
    If no signal is being received or the signal is very weak, a
    blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you
    must set the "Blue Screen" mode to "Off".

    TV

    Melody:
    You can hear melody sound when the television is powered
    on or off.
    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.



    TV

    2. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".

    Press the ENTER/OK button.
    3.




    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    &
    Play
    SRS TS XT
    : Off 
    Language
    : English
    Auto Volume
    : Off 
    Time
    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue Screen
    : Off
    Off
    Melody
    : Off
    On
    PC
    Home Theater PC : Off
    More
    Move Enter
    Return

    When you are satisfied with your setting,
    press the ENTER/OK button.
    Blue Screen: Off/On
    Melody: Off/Low/Medium/High

    Move

    Enter

    Return

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play
    SRS TS
    XT
    : Off 
    Language
    : English
    Auto Volume
    : Off 
    Time
    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue Screen
    : Off
    Melody
    : Off
    Off
    PC
    Low
    Home Theater PC : Off
    Medium
    More
    High
    Move Enter
    Return



    Move

    Enter

    Return

    4. Press the EXIT button to exit.

    Setting the Home Theater PC
    You can view higher quality pictures by configuring the
    screen settings in PC Mode.
    If you set the Home Theater PC function to On, you can
    configure the Detail Settings (when Picture Mode is
    set to Standard or Movie) as in PC Mode.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Home Theater PC".

    Press the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Off" or "On".

    Press the ENTER/OK button.
    4. Press the EXIT button to exit.
    This function is available only in PC mode.

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 

    Auto Volume
    : Off 
    Time

    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    More
    Move Enter
    Return


    TV

    Move

    Enter

    Return

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play
    SRS TS
    XT
    : Off 
    Language
    : English
    Auto Volume
    : Off 
    Time
    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue Screen
    : Off
    Melody
    : Off
    PC
    Home Theater PC : Off
    Off
    More
    On
    Move Enter
    Return



    Move

    Enter

    Return

    English - 29

    BN68-01186A-Eng-0309.indd 29

    2007-03-13 �� 11:24:46



  • Page 32

    Setting the Light Effect (LE40N8 LE46N8)
    You can turn on/off the blue LED on the front of TV according
    to the situation. Use it for saving power or when the LED
    dazzles your eyes.

    TV

    1. Press the MENU button to display the on-screen menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.
    2. Press the ▲ or ▼ button to select "Light Effect", then press
    the ENTER/OK button.
    3. Select the required option (Off, Standby Mode On,

    Watching Mode On, On) by pressing the ▲ or ▼ button.

    Press the ENTER/OK button.

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    & Play

    SRS TS
    XT
    : Off 
    Language
    : English 
    Auto
    Volume
    : Off 
    Time


    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue
    Screen
    : Off 
    Melody
    : Off 
    PC 
    Home Theater PC : Off 
    Light Effect
    : Watching Mode On 
    Move Enter
    Return
    More


    TV

     Off: LED will not come on.
     Standby Mode On: Turns the LED on in standby mode.
     Watching Mode On: Turns the LED on while watching

    TV.
     On: LED will come on after you turn the TV off.

    Move

    Enter

    Return

    Mode
    : Custom 
    Setup
    Equalizer 
    Plug
    &
    Play
    SRS TS XT
    : Off 
    Language
    : English
    Auto Volume
    : Off 
    Time
    InternalMode
    Mute
    : Off 
    Game
    : Off
    Reset
    Blue
    Screen
    : Off
    Melody
    : Off
    PC
    Off
    Home Theater PC : Off
    Standby Mode On
    Light Effect
    : Watching
    WatchingMode
    ModeOn
    On
    Move Enter
    More
    On Return


    Move

    Enter

    Return

    4. Press the EXIT button to exit.

    Using the Energy Saving Feature
    This function adjusts the brightness of the TV so as to reduce
    power consumption. When you watching TV at night, set the
    "Energy Saving " mode option to "High" so as to reduce the
    dazzling of your eyes as well as the power consumption.

    TV

    1. Press the MENU button to display the on-screen menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.

    Move Enter

    2. Press the ▲ or ▼ button to select "Energy Saving", then

    press the ENTER/OK button.
    3. Select the required option (Off, Low, Medium, High, Auto) by

    pressing the ▲ or ▼ button. Press the ENTER/OK button.
    4. Press the EXIT button to exit.

    Mode
    : Custom
    Setup
    Equalizer
    More
    SRS TS XT
    : Off

    Auto Volume
    : Off
    Energy
    Saving : Off
    Internal
    Mute
    : Off
    HDMI
    Black
    Level : Low
    Reset
    PIP



    TV

    Move

    Enter










    Return
    Return

    Setup
    More

    Energy Saving : Off
    Off
    HDMI Black Level : Off
    Low
    PIP
    Medium
    High
    Auto



    Move

    Enter

    Return

    English - 30

    BN68-01186A-Eng-0309.indd 30

    2007-03-13 �� 11:24:48



  • Page 33

    Selecting the Source
    You can select among external sources connected to your
    TV’s input jacks.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Input", then press the

    ENTER/OK button.
    2. Press the ENTER/OK button again, to select "Source List".

    When no external device is connected to your

    set, only "TV", "Ext.1", "Ext.2" are activated in the

    "Source List". "AV", "S-Video", "Component", "PC",

    "HDMI1", "HDMI2","HDMI3","DTV" are activated only

    when they are connected to your set.
    3. Select the required device by pressing the ▲ or ▼ button.

    Press the ENTER/OK button.

    Mode
    : Custom
    Input
    Equalizer
    Source
    List
    : TV
    SRS TS XT
    : Off
    Edit Name
    Auto
    Volume
    : Off
    Anynet+(HDMI-CEC)
    Internal Mute
    : Off
    Reset

    Move Enter


    TV

    Enter

    Return
    Return

    Mode
    : Custom

    Source
    List
    Equalizer 
    TV

    SRS
    TS
    XT
    : Off
    Ext.1
    : ---Auto Volume
    : Off 
    Ext.2
    : ---Internal Mute
    : Off 
    AV
    : ---S-Video
    : ---Reset
    Component
    : ---PC
    : ---HDMI1
    : ---HDMI2
    : ---HDMI3
    : ---Move Enter
    Return
    DTV
    : ---








    Move










    Move

    Enter

    Return

    Press the SOURCE button on the remote control to toggel
    between all the available source.
    TV mode can be selected by pressing the TV/DTV button,
    number buttons(0~9), and the
    P / button on the remote control. But it cannot be selected
    using the SOURCE button.

    Editing the Input Source Names
    Name the device connected to the input jacks to make your
    input source selection easier.

    TV

    1. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Input", then press the

    ENTER/OK button.

    Mode
    : Custom
    Input
    Equalizer
    Source
    List
    : TV
    SRS TS XT
    : Off
    Edit Name
    Auto
    Volume
    : Off
    Anynet+(HDMI-CEC)
    Internal Mute
    : Off
    Reset

    2. Press the ▲ or ▼ button to select "Edit Name", then press

    the ENTER/OK button.
    3.


    4.


    Press the ▲ or ▼ button to select the device that you wish to
    edit.
    Press the ENTER/OK button.
    Press the ▲ or ▼ button to select the required device.
    Press the ENTER/OK button.

    5. Press the EXIT button to exit.

    Move Enter


    TV

    Move

    Enter










    Return
    Return

    Mode

    Edit: Custom
    Name
    Equalizer 
    Ext.1
    : ------
    SRS
    TS
    XT
    : Off
    Ext.2
    : ---- VCR
    Auto Volume
    : Off 
    AV
    : ---DVD
    Internal Mute
    : Off
    S-Video
    : ---D-VHS 
    Component
    : ---Reset
    Cable STB
    PC
    : ---HDMI1
    : ----HD STB
    Satellite STB
    HDMI2
    : ---HDMI3
    : ---- q
    Move Enter



    Move

    Enter

    Return
    Return

    English - 31

    BN68-01186A-Eng-0309.indd 31

    2007-03-13 �� 11:24:50



  • Page 34

    Previewing the DTV Menu System
     The company does not guarantee the normal
    operation of the DTV menu for countries other
    than the 6 supported countries
    (United Kingdom, Germany, France, Italy, Spain,
    Austria) because only these country
    standards are supported. In addition, when
    the country of the broadcast stream differs from
    the country selected by the current user, the
    string appearing in the channel banner, Info,
    Guide, Channel Manager, etc. may not be
    displayed properly.

     Available in DTV mode. Preset to the DTV mode
    by using the TV/DTV button on your remote
    control. To help you navigate around the on-
    screen menu system and adjust the various
    settings available, refer to the following illustration.
    Press the D.MENU button.
    Guide
    Now & Next Guide
    Full Guide
    Scheduled List
    Default Guide

    Now/Next, Full Guide

    Channel
    Auto Store
    Manual Store
    Edit Favourite Channels
    Channel List
    Setup
    Menu Transparency
    Parental Lock
    Subtitle
    Subtitle Mode
    Audio Format
    Digital Text
    Time Zone
    System

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference



    High, Medium, Low, Opaque
    Enter PIN
    Off, On
    Normal, Hard of hearing
    PCM, Dolby Digital
    Disable, Enable
    Product Information
    Signal Information
    Software Upgrade
    Common Interface
    Reset

    Mode
    : Custom
    Guide
    Equalizer
    Now
    & Next
    SRS TS
    XT Guide: Off
    Full
    AutoGuide
    Volume
    : Off
    Scheduled
    List
    Internal Mute
    : Off
    Default
    Reset Guide : Full Guide








    Move Enter

    Return

    Move

    Exit

    Enter

    Channel
    Auto Store 
    Manual Store 
    Edit Favourite Channels 

    Channel List

    Move Enter

    Return

    Move

    Exit

    Enter

    Setup
    Menu Transparency : Medium
    Parental Lock
    Subtitle
    : On
    Subtitle Mode : Normal
    Audio Format : PCM








    Move Enter

    Return

    Move

    Exit

    Enter

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference 

    Move Enter

    Return

    Move

    Exit

    Enter

    You can select these options
    by simply pressing the

    D.MENU button on the

    remote control.

    Primary Audio Language
    Secondary Audio Language
    Primary Subtitle Language
    Secondary Subtitle Language
    Primary Teletext Language
    Secondary Teletext Language

    The sub-items of the CI Menu may vary depending on
    the CAM model.
    English - 32

    BN68-01186A-Eng-0309.indd 32

    2007-03-13 �� 11:24:52



  • Page 35

    Updating the Channel List Automatically
    You can update the channel list when the broadcaster
    adds new Services or if you move the TV to a new
    location.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Channel", then press

    the ENTER/OK button.

    Mode

    Auto: Custom
    Store
    Equalizer 
    SRS TS XT
    : Off 
    Auto Volume
    : Off
    Scanning
    for digital
    services... 
    Internal Mute
    : Off 
    35%
    Reset
    Services found: 24 Channel: 38
    Stop
    Move Enter

    3. Press the ENTER/OK button again, to select "Auto Store".

    Press the ENTER/OK button.

    Return

    Return

    4. When it has finished, the number of scanned services will

    be displayed.
    The existing favourite channel list will not be deleted when the channel list is updated.
    To stop the scan before it has finished, press the ENTER/OK button with "STOP" selected.
    5. Press the EXIT button to exit.


    If the signal status is poor, the "No Service found! Check the aerial connection" message is
    displayed.

    Updating the Channel List Manually
    You can specify the channel for a fast channel search.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Channel", then press

    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Manual Store", then

    press the ENTER/OK button.

    Manual Store
    Channel


    474000

    Bandwidth
    KHz

    8 MHz



    4. Press the ▲ or ▼ button to select "Channel", then press

    the ENTER/OK button.


    Frequency

    65

    Search
    Adjust

    Return

    • Channel: Channel "5" to "69" in sequence are displayed (depending on the country)



    • Frequency: The frequency available in the Channel group is displayed.



    • Bandwidth: The available bandwidths are 7 and 8 MHz.

    5. When it has finished, the number of scanned services will be displayed.
    6. Press the EXIT button to exit.

    English - 33

    BN68-01186A-Eng-0309.indd 33

    2007-03-13 �� 11:24:53



  • Page 36

    Editing Your Favourite Channels
    You can edit your favourite channels using the four colour
    buttons.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Channel", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
    then press the ENTER/OK button.
    4. Press the red button to display all currently stored channels.
    5. Press the ▲ or ▼ button to select a channel you want.
    Press the ENTER/OK button.

    A "" icon is shown next to the selected channel and the

    channel will be added to the favourite channel list.

    • To undo, press the ENTER/OK button again.
    • Select All: Select all channels currently displayed.

    • Select None: Deselect all selected channels.

    • Preview: Displays (a) currently selected channel(s).

    The Favorite Channels settings have been completed.

    6. Press the EXIT button to exit.
    Add
    You can use this function when one or more favourite
    channels have been selected.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Channel", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
    then press the ENTER/OK button.
    4. Press the red button in the "Edit Favourite Channels" menu.
    To add more channels, refer to the step 5 on the previous
    description.
    5. If you want to check the channel to be stored, press D.MENU
    button.
    Press the EXIT button to exit.
    • To add all channels to the favourite channel list, press the
    red button.
    • To remove all channels, press the green button.
    • Preview : Displays (a) currently selected channel(s).
    • Press the CH LIST button to display the favourite channel
    manager.

    Edit Favourite Channels
    (no Channels)

    Move Enter
    Add Channels

    Return

    Return

    Edit Favourite Channels
    5
    2
    5
    7
    15
    16
    6

    BBC TWO
    Five
    BBC THREE
    abc1
    QVC
    Move Enter
    Select All

    Select None

    Move

    Select

    Return
    Preview

    Return

    Edit Favourite Channels
    2

    BBC TWO



    7

    BBC THREE



    15

    abc1



    Move Enter
    Return
    Add
    Move
    Prewiew
    Delete
    Move

    Return

    Edit Favourite Channels
    5
    2
    5
    7
    15
    16
    6

    BBC TWO
    Five
    BBC THREE
    abc1
    QVC





    Move Enter
    Select All
    Select None

    Return
    Preview

    Move

    Return

    Select

    English - 34

    BN68-01186A-Eng-0309.indd 34

    2007-03-13 �� 11:24:56



  • Page 37

    Move
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Channel", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
    then press the ENTER/OK button.
    4. Select the required channel using the  or  button.
    5. Press the green button.

    A " " icon is displayed on the left side of the channel
    name.
    6. Press the ▲ or ▼ button to select the channel that you want
    to move, and press the green or ENTER/OK button.
    7. Press the EXIT button to exit.
    Preview
    1. In the "Edit Favourite Channels" menu,
    select the channel to be previewed by pressing the ▲ or ▼
    button.
    2. Press the yellow button.

    The selected channel is displayed on the screen.

    Edit Favourite Channels
    2

    BBC TWO



    7

    BBC THREE



    15

    abc1



    Move Enter
    Return
    Add
    Move
    Prewiew
    Delete
    Move

    Return

    Edit Favourite Channels
    2

    BBC TWO



    7

    BBC THREE



    15

    abc1



    Move Enter
    Return
    Add
    Move
    Prewiew
    Delete
    Move

    Delete
    1. In the "Edit Favourite Channels" menu, select the channel to
    be deleted from the favourite channels list by pressing the
    ▲ or ▼ button.
    2. Press the blue button.

    The selected channel and number will be deleted.

    To add a deleted channel back in to the favourite channel
    list, see "Add" on page 34.

    Select

    Return

    Edit Favourite Channels
    2

    BBC TWO



    7

    BBC THREE



    Move Enter
    Return
    Add
    Move
    Prewiew
    Delete
    Move

    Return

    English - 35

    BN68-01186A-Eng-0309.indd 35

    2007-03-13 �� 11:24:57



  • Page 38

    Selecting Channel List
    You can exclude the channels you have chosen from the
    Channel List
    All Channels
    Test Card M' v2.0
    channels you have scanned.When you scan through the
    1/2
    23 bid-up.tv
    60 Television X
    1 Test Card M'
    stored channels, those you have chosen to skip are not
    25 TCM
    70 BBC Radio 1
    3 Vida003b
    displayed. All channels that you do not specifically choose to
    26 UKTV Style
    72 BBC Radio 2
    4 Vida004b
    27 Discovery
    73 BBC Radio 3
    5 vida005b
    skip are displayed during scanning.
    28 DiscoveryH&L
    74 BBC Radio 4
    6 vida006b
    15 Cartoon Nwk
    84 heat
    15 Ch 15
    33 Boomerang
    91 MOJO
    16 QVC
    1. Press the D.MENU button to display the DTV menu.
    55 Ttext Holidays
    800 ARD-MHP-Data
    17 UKTV Gold
    6 More
    2. Press the ▲ or ▼ button to select "Channel", then press the
    Previous Page
    NextPage
    Favourites
    TV
    ENTER/OK button.
    Move
    Watch
    Return
    3. Press the ▲ or ▼ button to select "Channel List".
    Press the ENTER/OK button.
    4. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
    Press the ENTER/OK button.
    5. Press the yellow button to toggle between your favourite channels and all channels.

    Your favourite channels are only displayed if they were previously set in the "Editing Your

    Favourite Channels" menu (refer to page 34).
    6. Press the red or green button to display the previous or next channel List page.
    7. Press the ▲ or ▼ button to select a channel to be tuned.
    Press the ENTER/OK button.

    The channel number, name and an icon are displayed in the top left corner while changing the

    channel. The channel number and name are displayed if the channel is one of the all channels,

    and a icon if the channel is one of the favourite channels.
    8. Press the blue button to toggle between your TV, Radio, Data/Other and All.
    9. Press the CH LIST button to exit from the channel List.

    Displaying Programme Information
    While viewing a channel, additional information about the
    current programme may be displayed.
    1. While viewing a programme, press the INFO button.

    The programme information is displayed.
    2. To exit from banner information, press the INFO button.

    14:30 Sat 1 Sep
    AII Channels A

    1 AFDO,16:9
    14:30~14:33
    AFDO 16:9
    No Block
    Contains video with AFD O; coded frame
    SD
    is 16:9
    Stereo
    Subtitle
    English
    Move Enter
    Return
    Exit

    English - 36

    BN68-01186A-Eng-0309.indd 36

    2007-03-13 �� 11:24:58



  • Page 39

    Viewing the EPG (Electronic Programme Guide) Information
    The EPG (Electronic Programme Guide) information is
    provided by the broadcasters. Programme entries may
    appear blank or out of date as a result of the information
    broadcast on a given channel. The display will dynamically
    update as soon as new information becomes available.
    Now & Next Guide
    For the six channels indicated in the left-hand column,
    displays the Current programme and the Next programme
    information.
    Full Guide
    Displays the programme information as time ordered One
    hour segments. Two hours of programme information is
    displayed which may be scrolled forwards or backwards in
    time.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ENTER/OK button, to select "Guide".
    3. Press the ▲ or ▼ button to select "Now & Next Guide" or
    "Full Guide".
    Press the ENTER/OK button.

    You can also display the guide menu simply by pressing
    the GUIDE button.
    4.



    To...

    Then...

    Watch a programme in the EPG list

    • Select a programme by pressing
    the 5, 6, 3, 4 button.

    Now & Next Guide
    13:28 Wed 16 Feb
    Extreme Machines: Armoured Cars

    All Channels

    INFO

    Now

    Watch

    Full Guide

    Information

    Next

    Favourites
    Full Guide

    Exit

    13:28 Wed 16 Feb

    Extreme Machines: Armoured Cars
    INFO

    Today

    Watch

    13:00

    Now/Next

    Favourites

    Information

    14:00

    -24Hours

    +24Hours

    Exit

    • Press the ENTER/OK button.
    If the next program is selected, it is scheduled with the clock icon
    displayed. If the ENTER/OK button is pressed again, the scheduling is
    canceled with the clock icon gone. For details about scheduling
    programmes, refer to the next page.
    • Select a programme of your choice by
    pressing the 5, 6, 3, 4 button.
    View programme information







    • Press the INFO button when the
    programme of your choice is
    highlighted.

    Toggle between the "Now & Next
    Guide" or "Full Guide"

    • Press the red button repeatedly.

    Display the "Favourites" and the "All
    Channels" list

    • Press the green button repeatedly.

    Scrolls backwards quickly (24 hours).

    • Press the yellow button repeatedly.

    Scrolls forward quickly (24 hours).

    • Press the blue button repeatedly.

    Exit the guide

    • Press the EXIT button.

    The programme title is on the upper part of the screen center. Please click on INFO button for
    the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
    Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and
    brief summary of the highlighted programme are included on the detailed information. "..." will be
    appeared if the summary is long.
    Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼
    button. To display page by page, use the P or button.
    English - 37

    BN68-01186A-Eng-0309.indd 37

    2007-03-13 �� 11:24:59



  • Page 40

    Using the Scheduled List
    If you make a scheduled viewing list of programs you may
    like to see, the channel will be automatically switched to the
    scheduled program at the scheduled time even if you are
    watching another program.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ENTER/OK button, to select "Guide".
    3. Press the ▲ or ▼ button to select "Scheduled List", then
    press the ENTER/OK button.
    4. Press the red button.
    The channel will be switched to the scheduled program.
    5. Press the ENTER/OK button to select an item and adjust with
    the ◄ or ► button .

    You can also set hour and minute by pressing the number
    buttons on the remote control.
    • Channel: Set the channel.
    • Time: Set the time.
    • Date: Set Year, Month and Day.
    • Frequency: Set the frequency.

    ("Once", "Daily", or "Weekly")
    6. After setting the schedule, Press the red button.
    7. Press the EXIT button to exit.
    • Save: Save the adjusted schedule.
    • Cancel: Cancel the adjusted schedule.
    • Add Programme: Add a new schedule.
    • Edit: Re-adjust the selected schedule.
    • Delete: Delete the selected schedule.

    Scheduled List
    (No programmes)

    Add Programme

    Return

    Scheduled List
    Tuesday 22 Apr

    15:30 ~ 16:00

    Once

    801 RaiTre

    Add Programme

    Move

    Edit

    Delete

    Return

    Scheduled List
    Channel

    802 RaiUno

    Time

    15 : 20 to -- : --

    Date

    Tue 22 Apr 2007

    Frequency

    Once

    Save

    Adjust

    Cancel

    Move

    Return

    Setting the Default Guide
    You can preset the default guide style.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ENTER/OK button, to select "Guide".
    3. Press the ▲ or ▼ button to select "Default Guide", then press
    the ENTER/OK button.
    4. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
    and press the ENTER/OK button.
    5. Press the EXIT button to exit.

    Guide
    Now & Next Guide
    Full Guide
    Scheduled List
    Default Guide : Full
    Guide
    Now/Next
    Full Guide
    Move Enter
    Move

    Enter

    Return
    Return

    You can select these options
    by simply pressing the GUIDE

    button on the remote control.

    English - 38

    BN68-01186A-Eng-0309.indd 38

    2007-03-13 �� 11:25:01



  • Page 41

    Viewing All Channels and Favourite Channels
    In the EPG menu, you can display all channels or favourite
    channels.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ENTER/OK button again, to select "Guide".
    3. Select the your required guide ("Now & Next Guide" or "Full
    Guide") by pressing the ▲ or ▼ button.
    4. Press the ENTER/OK button.
    5. Press the green button.
    All the channel lists and the favorite channel lists will be
    toggled.
    6. Select a programme of your choice by pressing the ▲, ▼,
    ◄, or ► button.
    7. Press the INFO button to display information about the
    highlighted programme.
    8. When the Edit Favourite Channels list has not been set up:
    • "The favourites list is empty.
    Would you like to choose your favourites now?" message is
    displayed.
    • Select "Yes".
    The "Edit Favourite Channels" menu is displayed.
    If you select "No", all channels will remain unchanged.
    • To edit the favourite channels, refer to page 34 for more
    details.
    9 . Press the EXIT button to exit.
    "All Channels" is the list of channels that have been scanned by
    the channel list update.
    All channels are displayed in the all channel mode.
    "Favourites" (favourite channels) is the list of channels that has
    been set in the "Edit Favourite Channels" menu (refer to page 34).

    Now & Next Guide
    13:28 Wed 16 Feb
    Extreme Machines: Armoured Cars

    All Channels

    INFO

    Now

    Watch

    Full Guide

    Information

    Next

    Favourites

    Full Guide

    Exit

    13:28 Wed 16 Feb

    Extreme Machines: Armoured Cars
    INFO
    The favourites list is empty.
    13:00
    Would you like to choose your
    favourites now?

    Today

    Yes

    Watch

    Now/Next

    Favourites

    Information

    14:00

    No

    -24Hours

    +24Hours

    Exit

    English - 39

    BN68-01186A-Eng-0309.indd 39

    2007-03-13 �� 11:25:02



  • Page 42

    Adjusting the Menu Translucency
    You can set the translucency of the menu.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press
    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Menu Transparency"
    then press the ENTER/OK button.
    4. Select the required option ("High", "Medium", "Low", or
    "Opaque") by pressing the ▲ or ▼ button, and press the
    ENTER/OK button to change the setting.
    5. Press the EXIT button to exit.

    Setup
    Menu Transparency : Medium
    High
    Parental Lock
    Medium
    Subtitle
    : On
    Low
    Subtitle Mode : Normal
    Opaque
    Audio Format


    Move

    Enter

    Return

    Setting up the Parental Lock
    This feature allows you to prevent unauthorized users, such
    as children, from watching unsuitable programmes by a
    4-digit PIN (Personal Identification Number) code that is
    defined by the user. The on-screen menu will instruct you to
    assign a PIN code (you can change it later, if necessary).
    1. Press the D.MENU button to display the DTV menu.
    2. Press the  or  button to select "Setup", then press

    the ENTER/OK button.
    3. Press the  or  button to select "Parental Lock.", then

    press the ENTER/OK button.
    4. The "Enter PIN" is displayed.
    5. Enter your current 4-digit PIN code by using the numeric

    buttons (0~9).

    The options available in the "Parental Lock" group are

    displayed with the "Parental Rating" selected.

    The default PIN code for a new TV set is 0000.

    If you enter an invalid PIN code,the "Invalid PIN code.

    Please try again." message is displayed.
    6. Press the ENTER/OK button.
    7. Press the  or  button to select the age rating you want to

    lock out.

    Press the ENTER/OK button.
    8. If you want to change the PIN code,select "Change PIN" by

    pressing the  or  button. Press the ENTER/OK button.

    The "Enter New PIN" is displayed.
    9. Enter your new PIN code by using the numeric buttons (0~9).

    The "Confirm New PIN" is displayed.
    10. Re-enter your new PIN code to confirm by using the numeric

    buttons (0~9).

    The Your PIN code has been changed successfully
    message is displayed.
    11. Press the ENTER/OK button.
    12. Press the EXIT button to exit.
    If you forget the PIN code, press the remote control buttons

    in the following sequence, which resets the PIN to 0-0-0-0:

    POWER (Off), MUTE, 8, 2, 4, POWER (On).

    Setup
    Menu Transparency : Medium
    Parental Lock
    Subtitle
    : On
    Subtitle Mode : Normal
    Audio Format

    Move Enter
    Move

    Enter






    Return
    Return

    Parental Lock
    Enter PIN

    Enter PIN

    Return

    Parental Lock

    Parental Rating: No Block
    No Block
    No
    Block
    Change PIN
    3
    4
    5
    6
    7
    Move Enter ▼
    Return
    Move

    Enter

    Return

    Change PIN
    Confirm New PIN

    Your PIN code has been changed successfully.

    OK
    Enter PIN

    Return

    English - 40

    BN68-01186A-Eng-0309.indd 40

    2007-03-13 �� 11:25:04



  • Page 43

    Setting the Subtitle
    You can activate and deactivate the subtitles.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Subtitle ", then press the
    ENTER/OK button.
    4. Select "On" by pressing the ▲ or ▼ button. Press the
    ENTER/OK button.
    5. Press the EXIT button to exit.

    Setup
    Menu Transparency : Medium
    Parental Lock
    Subtitle
    : On
    Off
    Subtitle Mode : Normal
    On
    Audio Format

    Move Enter
    Move

    Enter

    Return
    Return

    Setting the Subtitle Mode
    Use this menu to set the Subtitle Mode. "Normal" under
    the menu is the basic subtitle and "Hard of hearing" is the
    subtitle for a hearing-impaired person.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Subtitle Mode", then
    press the ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Normal" or
    "Hard of hearing". Press the ENTER/OK button.
    5. Press the EXIT button to exit.
    If the programme you are watching does not support the
    "Hard of hearing" function, "Normal" automatically activates
    even though "Hard of hearing" mode is selected.

    Setup
    Menu Transparency : Medium
    Parental Lock
    : On
    Subtitle
    Subtitle Mode : Normal
    Normal
    Audio Format
    Hard of hearing

    Move Enter
    Move

    Enter

    Return
    Return

    Selecting the Audio Format
    You can only hear Dolby Digital sound through the audio
    Setup
    Menu Transparency : Medium
    receiver connected through an optical cable. You can only
    Parental Lock
    hear PCM sound through the main speaker.
    Subtitle
    : On
    When sound is emitted from both the main speaker and the
    Subtitle Mode : Normal
    audio receiver, a sound echo may occur due to the decoding

    Audio Format : PCM
    speed difference between the main speaker and the audio

    receiver. In this case, use the internal mute function.
    1. Press the D.MENU button to display the DTV menu.
    Move
    Enter
    Return
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Audio Format", then press the ENTER/OK button.
    4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER/OK button.
    5. Press the EXIT button to exit.
    The Audio Format appears according to the broadcasting signal.
    Dolby digital sound is only available when the TV is connected with an external speaker using an
    optical cable.



    English - 41

    BN68-01186A-Eng-0309.indd 41

    2007-03-13 �� 11:25:05



  • Page 44

    Selecting the Digital Text
    If the programme is broadcast with digital text, this feature is
    Setup

    enabled.
    Digital Text : Enable
    Disable
    1. Press the D.MENU button to display the DTV menu.
    Time Zone
    Enable
    System
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Digital Text", then press
    the ENTER/OK button.
    Move
    Enter
    Return
    4. Press the ▲ or ▼ button to select "Disable" or
    "Enable". Press the ENTER/OK button.
    5. Press the EXIT button to exit.
    MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard
    for data encoding systems used in multimedia and hypermedia. This is at a higher level than the
    MPEG system which includes data-linking hypermedia such as still images, character service,
    animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction
    technology and is being applied to various fields including VOD (Video-On-Demand), ITV
    (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and
    network games.

    Selecting the Time Zone (Spain only)
    Select the time zone where locate
    1. Press the D.MENU button.
    2.

    3.

    4.




    Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    Press the ▲ or ▼ button to select "Time Zone", then press
    the ENTER/OK button.
    Select the time zone where you locate by pressing the
    ▲ or ▼ button.
    Press the ENTER/OK button.
     he following options are available
    T
    The Iberian Peninsula and Balears Islands Canarian Islands
    5. Press the EXIT button to exit.

    Viewing Product Information
    You can view your product information. For service or
    repair, please contact a Samsung approved dealer.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press
    the ENTER/OK button.
    4. Press the ENTER/OK button again, to select "Product
    Information".

    The Product Information menu is selected.
    - Software Version, Firmware Version
    5. Press the EXIT button to exit.

    Setup

    Digital Text
    Time Zone
    System

    Move

    Enter



    Return

    Time Zone
    The Iberian Peninsula and Balears Islands
    Canarian Islands

    Adjust

    Enter

    Return

    Product Information
    Software Version: T_BDXPDEU00_0700
    Firmware Version: T_STDEU7_102c

    Return

    English - 42

    BN68-01186A-Eng-0309.indd 42

    2007-03-14 �� 12:39:54



  • Page 45

    Checking the Signal Information
    You can get information about the signal status.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press the
    ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Signal Information",
    then press the ENTER/OK button.
    5. Press the EXIT button to exit.
    If the signal status is poor, the "No signal." message is
    displayed.

    Signal Information
    Service: ?
    Service ID:0000
    Multiplex: ? (TSID 0000, ONID 0000)
    Network: ? (ID 0000)
    Bit error level:
    10
    Signal Strength: 0

    Move Enter

    Return

    Return

    Upgrading the Software
    To keep your product up-to-date with new Digital Television
    features then software upgrades are periodically broadcast
    as part of the normal Television signal.
    It will automatically detect these signals and display the
    software upgrade banner. You are given the option to install
    the upgrade.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press the
    ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Software Upgrade",
    then press the ENTER/OK button.
    5. Press the ▲ or ▼ button to select "Software Infomation",
    "Manual Upgrade" or "Satandby Mode upgrade".
    Press the ENTER/OK button.
     Software Inforamtion
    Press the ENTER/OK button, then the current software
    version is shown. To display the software version
    information, press the ENTER/OK button again.
     Manual Upgrade
    Press the ENTER/OK button to search for new software
    from the currently broadcasting channels.
     Standby Mode Upgrade : On / Off
    Press the ENTER/OK button. To continue software
    upgrade with master power on, Select On by pressing
    the ▲ or ▼ button.
    45 minutes after entering standby mode, a manual
    upgrade is automatically conducted. Since the power
    of the unit is turned on internally, the screen may be
    on slightly for the LCD product. This phenomenon may
    continue for more than 1 hour until the software upgrade
    is completed.
    6. Press the EXIT button to exit.

    System
    Product Information
    Signal Information
    Software Upgrade
    Common Interface
    Reset

    Move






    Enter

    Return

    Software Upgrade




    Software Information
    Manual Upgrade
    Standby Mode upgrade : On

    Move

    Enter

    Return

    Software Upgrade




    Software Information
    Manual Upgrade
    Standby Mode upgrade : On

    Move

    Enter

    Return

    Software Upgrade
    Software Information
    Manual Upgrade
    Standby Mode upgrade : On

    Move

    Enter





    Return

    English - 43

    BN68-01186A-Eng-0309.indd 43

    2007-03-13 �� 11:25:09



  • Page 46

    Viewing Common Interface
    This contains information on CAM inserted in the CI slot and
    displays it.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press the
    ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Common Interface",
    then press the ENTER/OK button.
    5. Press the ENTER/OK button to display the information for
    your application.
    6. Press the EXIT button to exit.
    The Application Info inserting is about the CI CARD.
    You can install the CAM anytime whether the TV is ON or
    OFF.
    1. Purchase the CI CAM module by visiting your nearest dealer
    or by phone.
    2. Insert the CI CARD into the CAM in the direction of the
    arrow until it fits.
    3. Insert the CAM with the CI CARD installed into the common
    interface slot.
    (Insert the CAM in the direction of the arrow, right up to the end
    so that it is parallel with the slot.)
    4. Check if you can see a picture on a scrambled signal
    channel.

    Application Info
    Type : CA
    Manufacturer : Channel Plus
    Info : Top Up TV

    Return

    Selecting the CI (Common Interface) Menu
    This enables the user to select from the CAM-provided menu.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press the
    ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Common Interface",
    then press the ENTER/OK button.
    5. Select to "CI Menu" by pressing the ▲ or ▼ button, and
    press the ENTER/OK button.
    6. Select the required option by pressing the ▲ or ▼ button,
    and press the ENTER/OK button.
    7. Press the EXIT button to exit.
    Select the CI Menu based on the menu PC Card.

    CI Menu
    Main menu
    Module information
    Smart card information
    Language
    Software Download
    Press OK to select, or Exit to quit
    Move

    Enter

    Exit

    English - 44

    BN68-01186A-Eng-0309.indd 44

    2007-03-13 �� 11:25:10



  • Page 47

    Resetting
    You can reset the values stored to the factory default
    values.
    The Reset operation deletes all channel information and
    user preferences returningall values to their default factory
    state.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Setup", then press the
    ENTER/OK button.
    3. Press the ▲ or ▼ button to select "System", then press
    the ENTER/OK button.
    4. Press the ▲ or ▼ button to select "Reset", then press the
    ENTER/OK button.
    5. The "Enter PIN" screen will appear.
    6. Enter your current 4-digit PIN code by using the numeric
    buttons (0~9).

    T
     he warning message is displayed.All values will be
    reset by pressing the coloured buttons (red, green,
    yellow, and blue)in turn.
    7. Press the EXIT button to exit.

    Reset
    Enter PIN

    Enter PIN

    Return

    Reset
    WARNING: All channel settings and user
    preferences will be lost and returned to
    the factory defaults. It is recommended
    that a reset is performed only when
    serious problems are experienced.

    Return

    Selecting the Preferred Language (Subtitle , Audio or Teletext)
    You can change the default value for subtitle, audio teletext
    languages.
    Displays the language information for the incoming stream.
    1. Press the D.MENU button to display the DTV menu.
    2. Press the ▲ or ▼ button to select "Language", then press
    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select "Audio Language",

    "Subtitle Language" or "Teletext Language".

    Press the ENTER/OK button.
    4. Select a particular language by pressing the ▲ or ▼ button
    repeatedly.
    Press the ENTER/OK button.

    English is the default in cases where the selected
    language is unavailable in the broadcast.
    5. Press the EXIT button to exit.
    While viewing a programme, the subtitle can be selected.
    While viewing a programme, audio languages can be
    selected.

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference 

    Move

    Enter

    Return

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference 

    Move

    Enter

    Return

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference 

    Move

    Enter

    Return

    English - 45

    BN68-01186A-Eng-0309.indd 45

    2007-03-13 �� 11:25:12



  • Page 48

    Preference
    This menu consists of 6 sub-menus:
    Primary Subtitle Language, Secondary Subtitle Language,
    Primary Audio Language, Secondary Audio Language,
    Primary Teletext Language, and Secondary Teletext
    Language.
    Using this feature, users can select one of the languages
    (English, German, Italian, Swedish, French, Welsh, Gaelic,
    Irish, Danish, Finnish, Norwegian, Spanish, Czech, and Greek).
    The language selected here is the default when the user selects
    a channel.

    Language
    Audio Language
    Subtitle Language
    Teletext Language
    Preference 
    Move Enter
    Move

    Enter

    Return
    Return

     Press the ▲ or ▼ button to select required menu (Primary Subtitle Language, Secondary Subtitle
    Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language, or
    Secondary Teletext Language), then press the ENTER/OK button. The options of the selected menu
    are displayed.
     
    Press the ▲ or ▼ button to select required option (English, German, Italian, Swedish, French,
    Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech, or Greek), then press the
    ENTER/OK button.
     If you change the language setting, the Subtitle Language, Audio Language, and the Teletext
    Language of the Language menu (refer to page 45) are automatically changed to the selected
    language.
     The Subtitle Language, Audio Language, and the Teletext Language of the Language menu
    show a list of languages supported by the current channel and the selection is highlighted. If
    you change this language setting, the new selection is only valid for the current channel. The
    changed setting does not change the setting of the Primary Subtitle Language, Primary Audio
    Language, or the Primary Teletext Language of the Preference menu.

    Teletext Decoder
    Most set channels carry " teletext ", pages of written
    information that provide information such as:
    Television programme times.
    News bulletins and Weather forecasts.
    Sports results.
    Subtitles for the hard of hearing.
    The teletext pages are organized according to six categories:
    Part
    A
    B
    C
    D
    E
    F

    Contents
    Selected page number.
    Broadcasting station identity.
    Current page number or search status.
    Date and time.
    Text.
    Status information.

    English - 46

    BN68-01186A-Eng-0309.indd 46

    2007-03-13 �� 11:25:13



  • Page 49

    Displaying the Teletext Information
    You can display teletext information at any time, but signal reception
    must be good. Otherwise:


    Information may be missing.



    Some pages may not be displayed.

    To activate the teletext mode and display the contents page:
    1. Using the P ( ) or P

    the teletext service.

    (

    ) button, select the channel providing

    2. Press the TEXT/MIX (
    ) button to activate the teletext mode.

    The contents page is displayed. It can be redisplayed at any time
    by pressing the MENU ( ) button.
    ) button again.
    3. Press the TEXT/MIX (

    The actual broadcast will be displayed with "Teletext", "Double",
    and "Mix" in order on the screen.
    4. Press the TV/DTV button to exit from the Text display.

    If any broken character appears while Text is being viewed, make
    sure that the Text language is identical with the language in the
    "Setup" menu mode. If both languages are different, select the same language with the Text
    language on the "Setup" menu.

    Selecting a Specific Teletext Page
    Press the number buttons on the remote control to enter the
    page number directly:
    1. Enter the three-digit page number listed in the contents by pressing
    the corresponding numeric buttons.
    2. If the selected page is linked with several secondary pages, the
    secondary pages are displayed in sequence. To freeze the display
    on a given page, press the PIP ( ) . Press the PIP ( ) button
    again to resume.
    3. Using the various display options:
    To display...

    Press the...

    Both teletext information and the normal broadcast

    TEXT/MIX (

    Hidden text (answers to quiz games, for example)

    INFO (

    )

    The normal screen

    INFO (

    )

    A secondary page, by entering its 4-digit number

    PRE-CH (

    The next page
    The previous page

    P
    P

    Double-size letters in the:
     Upper half of the screen
     Lower half of the screen

    P.SIZE (
     Once
     Twice

    Normal screen

     Three times

    (
    (

    )

    )

    )
    )
    )

    English - 47

    BN68-01186A-Eng-0309.indd 47

    2007-03-13 �� 11:25:13



  • Page 50

    Using Fastext to Select a Teletext Page
    The various topics included in the teletext pages are colour-coded,
    and can be selected by pressing the coloured buttons on the remote
    control.
    1. Display the teletext contents page by pressing the TEXT/MIX (

    button.

    )

    2. Press the coloured button corresponding to the topic that you wish to

    select (The available topics are listed on the status information line).
    3. Press the Red button to display the previous page.

    Press the Green button to display the next page.
    4. Press the TV/DTV button to exit from the Text display.

    Setting Up Your Remote Control
    After it has been set up properly, your remote control can operate in five
    different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between
    these modes, and control whichever piece of equipment you choose.
    The remote control might not be compatible with all DVD Players,
    VCRs, Cable boxes, and Set-Top Boxes.
    Setting Up the Remote to Operate Your VCR, CABLE, DVD and STB
    1. Turn off your VCR, CABLE, DVD and STB.
    2. Press the VCR, CABLE, DVD and STB button on your TV’s remote control.
    3. Press the SET button on your TV’s remote control.
    4. Using the number buttons on your remote control, enter three digits of the
    VCR code listed on pages 49~51 of this manual for your brand of VCR.
    Make sure you enter three digits of the code, even if the first digit is a "0".
    (If more than one code is listed, try the first one.)
    5. Press the POWER button on the remote control.

    Your VCR should turn on if your remote is set up correctly.
    If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try
    one of the other codes listed for your brand of VCR.
    If no other codes are listed, try each VCR code, 000 through 080.

    English - 48

    BN68-01186A-Eng-0309.indd 48

    2007-03-13 �� 11:25:14



  • Page 51

    Remote Control Codes
    VCR
    Brand
    SAMSUNG
    ADMIRAL
    AIWA
    AKAI
    AUDIO DYNAMICS
    BELL&HOWELL
    BROKSONIC
    CANDLE
    CANON
    CITIZEN
    COLORTYME
    CRAIG
    CURTIS MATHES
    DAEWOO
    DB
    DIMENSIA
    DYNATECH
    ELECTROHOME
    EMERSON
    FISHER
    FUNAI
    GENERAL ELECTRIC
    GO VIDEO
    HARMAN KARDON
    HITACHI
    INSTANT REPLAY
    JC PENNEY
    JCL
    JVC
    KENWOOD
    KLH
    KONIA
    LG(Goldstar)
    LIOYD
    LOGIK
    LXI
    MAGNAVOX
    MARANTZ
    MARTA
    MEI
    MEMOREX
    MGA
    MIDLAND
    MINOLTA
    MITSUBISHI

    Code
    000 001 002 003 004 005 077 078 079
    020
    025
    004 027 032
    007 026
    018
    022
    002 003 006 008 015 055
    021 056
    002 003 006 008 015 055
    007
    002 024
    002 007 008 017 021 025 056 064 066
    003 010 011 012 013 014 015 016
    007 026
    017
    025
    034
    001 003 006 021 022 025 030 032 034 040
    047 050 052 060 063 065 066 067 069 073
    018 024 028 029 048 051 061
    025
    002 005 017 021 056
    002
    007
    019 025 041 042 074
    021
    002 007 018 019 021 026 037 041 054 056
    007 008 018 021 026 037
    081 082 083
    007 008 018 021 026 037
    070
    036
    006 007 008 009 010
    025
    038
    025
    021 056 059
    007 008 018 021 026 037 062
    006
    021
    006 021 024 025
    034
    005
    019 041 075
    019 034 041 046

    Brand
    MONTGOMERY WARD
    MTC
    MULTITECH
    NEC
    OPTIMUS
    ORION
    PANASONIC
    PENTAX
    PENTEX
    RESEARCH+
    PHILCO
    PHILIPS
    PIONEER
    PORTLAND
    PROSCAN
    QUARTZ
    QUASAR
    RADIO SHACK/
    REALISTIC
    RCA
    SANSUI
    SANYO
    SCOTT
    SEARS
    SHARP
    SHIMTOM
    SIGNATURE
    SONY
    SYLVANIA
    SYMPHONIC
    TANDY
    TASHIKA
    TATUNG
    TEAC
    TECHNICS
    TEKNIKA
    TMK
    TOSHIBA
    TOTEVISION
    UNITECH
    VECTOR RESEARCH
    VICTOR
    VIDEO CONCEPTS
    VIDEOSONIC
    WARDS
    YAMAHA
    ZENITH

    Code
    020
    002 025
    002 005
    007 008
    020
    073 074
    021 056
    019 041
    008
    021
    021
    019
    015
    017
    018
    021
    006

    025 038
    018 026 037 062 064
    075 076
    071 072
    075

    056 059
    080
    026 039 053
    049 055

    056
    018 020 021 024 025 029 034 048 056

    002 017 019 021 035 041 043 057 068 076
    026
    018 024
    003 047 052 067
    006 018 019 024 028 029 041 048 051
    020 034 045 015
    027 033 038 058
    025
    027 033 044
    021 025 056 059
    025
    018 025
    006
    037
    025 037 068
    021
    006 021 025 031
    066
    003 019 029 051 052
    002 006
    002
    007 026
    026
    007 026
    002
    002 003 006 019 020 021 024 025 034 038 041
    007 008 018 026 037
    023 027 033

    English - 49

    BN68-01186A-Eng-0309.indd 49

    2007-03-13 �� 11:25:14



  • Page 52

    CABLE BOX
    Brand
    SAMSUNG
    GI
    HAMLIN
    HITACHI
    JERROLD
    MACOM
    MAGNAVOX
    OAK
    PANASONIC
    PHILIPS
    PIONEER
    RCA
    REGAL

    Code
    000 001
    041
    003 024
    025 030
    038 039
    025 030
    019 023
    026
    003 022
    019 021
    004 018
    014 022
    003

    Brand
    REGENCY
    SA
    SCIENTIFIC ATLAN
    SPRUCER
    STARGATE 2000
    SYLVANIA
    TEXSCAN
    TOCOM
    UNIVERSAL
    VIEWSTAR
    WAMER AMEX
    ZENITH

    002 003 004 005 006 007
    031

    028
    027 037 044
    023 028
    020 044
    040

    Code
    015 023
    042 043
    042 043
    022
    036
    016
    016
    032
    033 034
    019 021 023 028
    046
    017 029 035 037 045

    SAMSUNG DVD
    Product
    DVD
    DVDR
    BD Record
    VCR COMBO
    VCR Record
    DHR COMBO

    Code
    000 001 002
    003 004
    005 006
    007 008 009 010 011
    012
    013

    Product
    Home Theater VCR COMBO
    HDD Recorder COMBO
    TWIN TRAY COMBO
    STB DVD COMBO
    DVD Receiver
    AV Receiver

    Code
    030
    075
    085
    072
    070 071 074 086 083 084 088 111 112
    114
    062
    074
    122 123
    027
    077 078 079 082
    080 125
    081
    065
    095
    066
    146
    067 068
    090
    060
    061 089 133 135
    069 074
    074
    064 113
    071
    073
    091 110
    089

    Brand
    INTEGRA
    JBL
    JVC
    JATON
    KENWOOD
    KISS
    KONKA
    KLH
    LG(Goldstar)
    LOEWE
    LASONIC
    MOBILE
    AUTHORITY
    MEMOREX
    MALATA
    MAGNAVOX
    MINTEK
    MONYKA
    NORCENT
    NEXT BASE
    NEC
    NANTAUS
    NESA
    OPTOMEDIA
    ELECTRONICS
    OPTIVIEW
    ONKYO
    PHILCO
    PRINCETON
    PROSCAN

    Code
    014 015 016
    017
    018
    019
    020
    021

    DVD
    Brand
    ANAM
    AUDIOVOX
    AUDIOLOGIC
    ANABA
    APEX DIGITAL
    AIWA
    BROKSONIC
    BLAUPUNKT
    B&K
    CURTIS MATHES
    CYBER HOME
    CLARION
    CIRRUS
    CYBER HOME
    CINEVISION
    DAEWOO
    DENON
    FARENHEIT
    FISHER
    GPX
    GO VIDEO
    GE
    GREENHILL
    HITACHI
    HITEKER
    HOYO
    HARMAN / KARDON
    IRT

    Code
    092
    091
    022 033 115 116
    073
    051 108 109
    073
    059 100 106 107
    074 075
    025 031
    057
    058
    054
    055
    056
    076 093
    074 094
    073
    048 049 050
    052
    053
    144
    074
    105
    072
    076 092 119
    044 045
    046 047
    023

    English - 50

    BN68-01186A-Eng-0309.indd 50

    2007-03-13 �� 11:25:15



  • Page 53

    DVD
    Brand
    PANASONIC
    PHILIPS
    ROTEL
    RIO
    RCA
    RAITE
    ROWA
    SAMPO
    SONY
    SHERWOOD
    SVA
    SYLVANIA
    SHARP
    SANSUI
    SANYO
    SHINSONIC

    Code
    024 034 124 134 136 137 138
    036 076
    117 118
    120
    023 035 074 075 131 132
    073
    038
    104
    026 029 126 127 128 129 130 141
    039 041
    042
    043 093
    140
    062
    062 090
    094

    Brand
    THOMSON
    TOSHIBA
    TECHNICS
    TVIEW
    TOKAI
    TEAC
    TECHWOOD
    TREDEX
    URBAN CONCEPTS
    VENTURER
    VOCOPRO
    YAMAHA
    YAMAKAWA
    XWAVE
    ZENITH

    Code
    145
    028 062 076
    139
    072
    073
    096
    097
    098 099 101
    076
    075
    102
    032 063
    040 073
    103
    076 121

    SAMSUNG SET-TOP BOX
    Product
    Ground wave STB
    Satellite STB
    CABLE STB
    STB DVD COMBO
    Satellite STB HDD COMBO Standard

    Code
    001 002
    003
    004
    008
    009

    Product
    Satellite STB HDD COMBO Premium
    CABLE STB HDD COMBO Standard
    CABLE STB HDD COMBO Premium
    Ground wave STB HDD COMBO Standard
    Ground wave STB HDD COMBO Premium

    Code
    010
    011
    012
    013
    014

    SET-TOP BOX
    Brand
    ALPHASTAR
    ANAM
    CHANNEL
    MASTER
    CROSSDIGITAL
    CHAPARRAL
    DIRECT TV
    DAEWOO
    DISH NETWORK
    SYSTEM
    DISHPRO
    DRAKE
    DX ANTENNA
    ECHOSTAR
    EXPRESSVU
    GOI
    GE
    GENERAL INSTRUMENT
    HTS
    HOME CABLE
    HITACHI
    HUGHES NETWORK
    IQ
    IQ PRISM
    JANEIL
    JERROID
    JVC
    LG(Goldstar)

    Code
    023
    043
    018 034
    019
    035
    015 016 017 019 022 045 060 061 062
    065 066 067 068
    074
    069 070
    069
    018
    027
    025
    069
    069
    065
    046
    069
    056
    022
    015
    020
    020
    059
    063
    069
    044

    024 032
    069 070 071

    047 048 063 064

    017

    Brand
    MAGNAVOX
    MEMOREX
    MOTOROLA
    MACOM
    MITSUBISHI
    NEXT LEVEL
    PHILIPS
    PRIMESTAR
    PANASONIC
    PAYSAT
    PROSCAN
    RCA
    RADIOSHACK
    REALISTIC
    STAR TRAK
    STS
    SKY
    SKY LIFE
    SHACK
    STAR CHOICE
    SONY
    TOSHIBA
    ULTIMATE TV
    UNIDEN
    ZENITH

    Code
    016 021
    016
    064
    018
    015
    047 048
    015 016
    041 042
    046 049
    058 059
    016
    065 066
    051 052
    064
    057
    026
    020 027
    031
    005 006
    064
    064
    054 060
    015 017
    060 066
    016 021
    024 031

    036 038 039 040 041 042

    064
    017 021 033 036 038 039 040
    067
    050 063
    061 062

    053 065 066

    007

    028 029 030 072
    037 055 056 057
    068

    070
    073

    English - 51

    BN68-01186A-Eng-0309.indd 51

    2007-03-13 �� 11:25:15



  • Page 54

    Setting up Your PC Software (Based on Windows XP)
    The Windows display-settings for a typical computer are shown below. The
    actual screens on your PC may be different depending upon your particular
    version of Windows and your particular video card. Even if your actual
    screens look different, the same, basic set-up information will apply in almost
    all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
    1. First, click on "Control Panel" on the Windows start menu.
    2. When the control panel window appears, click on "Appearance and Themes"

    and a display dialog-box will appear.
    3. When the control panel window appears, click on "Display" and a display dialog-box will appear.
    4. Navigate to the "Settings" tab on the display dialog-box.

    The correct size setting (resolution): Optimum- 1920 X 1080

    If a vertical-frequency option exists on your display settings dialog box, the correct value is

    "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

    Display Modes
    Both screen position and size will vary depending on the type of PC monitor and its resolution.
    The resolutions in the table are recommended. (All resolutions between the supported limits are
    supported)
    D-Sub Input
    Mode

    Resolution

    Horizontal
    Frequency (kHz)

    Vertical
    Frequency (Hz)

    Pixel Clock
    Frequency (MHz)

    Sync Polarity
    (H/V)

    IBM

    640 x 350
    640 x 480
    720 x 400

    31.469
    31.469
    31.469

    70.086
    59.940
    70.087

    25.175
    25.175
    28.322

    +/-/-/+

    VESA

    640×480
    640×480
    640×480
    800×600
    800×600
    800×600
    800×600
    800×600
    1024×768
    1024×768
    1024×768
    1024×768
    1152 x 864
    1280 x 960
    1280×1024
    1280×1024
    1280×1024
    1280×1024
    1600×1200
    1920×1080

    35.000
    37.861
    37.500
    35.156
    43.750
    37.879
    48.077
    46.875
    57.672
    48.364
    56.476
    60.023
    67.500
    60.000
    63.981
    74.620
    76.824
    79.976
    75.000
    66.587

    70.000
    72.809
    75.000
    56.250
    70.000
    60.317
    72.188
    75.000
    72.000
    60.000
    70.069
    75.029
    75.000
    60.000
    60.020
    70.000
    72.000
    75.025
    60.000
    59.934

    28.560
    31.500
    31.500
    36.000
    45.500
    40.000
    50.000
    49.500
    78.434
    65.000
    75.000
    78.750
    108.000
    108.000
    108.000
    128.943
    132.752
    135.000
    162.000
    138.500

    -/+
    -/-/+/+
    -/+
    +/+
    +/+
    +/+
    -/-/-/+/+
    +/+
    +/+
    +/+
    -/-/+/+
    +/+
    +/-

    Horizontal
    Frequency (kHz)
    31.469
    31.469
    31.469
    37.879
    48.364
    63.981
    66.587

    Vertical
    Frequency (Hz)
    70.086
    59.940
    70.087
    60.317
    60.000
    60.020
    59.934

    Pixel Clock
    Frequency (MHz)
    25.175
    25.175
    28.322
    40.000
    65.000
    108.000
    138.500

    Sync Polarity
    (H/V)
    +/-/-/+
    +/+
    -/+/+
    +/-

    HDMI/DVI Input
    Mode
    IBM

    VESA

    Resolution
    640 x 350
    640 x 480
    720 x 400
    800×600
    1024×768
    1280×1024
    1920×1080

    The interlace mode is not supported.
    The set might operate abnormally if a non-standard video format is selected.
    Separate and Composite modes are supported. SOG is not supported.
    English - 52

    BN68-01186A-Eng-0309.indd 52

    2007-03-13 �� 11:25:16



  • Page 55

    Setting the PC
    Coarse and Fine Tuning of the Image (Image Lock):
    The purpose of picture quality adjustment is to remove or
    reduce picture noise.
    If the noise is not removed by Fine-tuning alone, then adjust
    the frequency as best as possible (coarse) and Fine-tune
    again.
    After the noise has been reduced, re-adjust the picture so that
    it is aligned on the center of screen.

    TV

    Mode
    : Custom 
    Image Lock

    Equalizer
    SRS TS XT
    : Off 50
    Coarse
    Auto Volume
    : Off 50
    Fine
    Internal Mute
    : Off 
    Reset

    Move Enter

    1. Preset: Press the SOURCE button to select PC mode.



    2. Press the MENU button to display the menu.

    Press the ▲ or ▼ button to select "Setup", then press the

    ENTER/OK button.

    Move

    Enter

    Return
    Return

    3. Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button.
    4. Press the ENTER/OK button to select "Image Lock".
    5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button.
    6. Press the ◄ or ► button to adjust the screen quality.

    Press the ENTER/OK button.
    7. Press the EXIT button to exit.
    Changing the Image Position:
    Adjust the PC’s screen positioning if it does not fit the TV
    screen.

    TV

    Position

    1. Follow the "Coarse and Fine Tuning of the Image

    (Image Lock)"

    instructions number 1 to 3.
    2. Press the ▲ or ▼ button to select "Position", then press the

    ENTER/OK button.



    3. Press the ▲ or ▼ button to adjusting the Vertical-Position.

    Press the ◄ or ► button to adjust the Horizontal-Position.

    Press the ENTER/OK button.

    Move

    Enter

    Return

    4. Press the EXIT button to exit.
    Adjusting the PC Screen Automatically (Auto Adjustment):
    Auto adjustment allows the PC screen of set to self-adjust to
    the incoming PC video signal. The values of fine, coarse and
    position are adjusted automatically.

    TV

    1. Follow the "Coarse and Fine Tuning of the Image

    (Image Lock)" instructions number 1 to 3.

    PC
    Image Lock
    Position
    Auto Adjustment
    Image Reset






    2. Press the ▲ or ▼ button to select "Auto Adjustment", then

    press the ENTER/OK button.


    3. Press the EXIT button to exit.
    Initializing the Image Settings (Image Reset):
    You can replace all image settings with the factory default
    values.
    1. Follow the "Coarse and Fine Tuning of the Image

    (Image Lock)" instructions number 1 to 3.

    TV

    Move

    Enter

    Return

    PC
    Image Lock
    Position
    Auto Adjustment
    Image Reset






    2. Press the ▲ or ▼ button to select "Image Reset", then press

    the ENTER/OK button.
    3. Press the EXIT button to exit.


    Move

    Enter

    Return

    English - 53

    BN68-01186A-Eng-0309.indd 53

    2007-03-13 �� 11:25:17



  • Page 56

    Wall-Mount Adjustment(LE40M8, LE46M8, LE52M8, LE40N8, LE46N8)(Sold separately)
    Once the wall mount is installed, the position of your TV can be easily adjustable.
    TV Rear Panel

    Auto Wall-Mount

    Serial Cable(1P to 1P)(Not supplied)

    Entering the menu
    1. Press the MENU button to display the menu.
    Press the ▲ or ▼ button to select “Setup”, then press the
    ENTER/OK button.
    2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,
    then press the ENTER/OK button.
    3. Adjust to the desired position using the ▲,▼,◄,► buttons.
    If you press an arrow button when no OSD is displayed on the
    TV screen, the Adjustment screen appears.
    (When watching analog broadcasting) If you press an arrow
    button when no OSD is displayed on the TV screen,

    the Adjustment screen appears.
    (When watching digital broadcasting) If you press the ENTER/
    OK button for three seconds when no OSD is displayed on the

    TV screen, the Adjustment screen appears.
    When you turn the power off, your TV moves to the initial
    installation position.
    When you turn the power on, your TV moves to the last
    remembered position you adjusted.

    TV

    Mode
    : Custom
    Setup
    Equalizer
    More
    SRS TS XT
    : Off
    Wall-Mount Adjustment
    Auto
    Volume
    : Off
    Energy
    Saving : Off
    Internal
    Mute
    : Off
    HDMI
    Black
    Level : Low
    Reset
    PIP

    Move Enter


    Move











    Return

    Enter

    Return

    Wall Mount Adjusment
    Position1

    Position
    Adjust

    1
    INFO

    2 3
    Center Exit

    Using the Remote Control Buttons

    Button

    Operations
    Wall-mount angle
    adjustment

    Tilt Up, Tilt Down, Move right, Move left

    Reset

    Moves to the initial installation position

    Remembering the
    position and moving
    to the remembered
    position

    Remembers 3 positions with the Red, Green and
    Yellow buttons.
    Moves to the remembered position using these 3
    color buttons.

    For installation, refer to the Installation Manual provided.
    For product installation and the installation and moving of the wall mount, make sure to consult a
    specialized installation company.
    This installation manual is to be used when attaching the wall mount to a wall.
    When attaching to other building materials, please contact your nearest dealer
    English - 54

    BN68-01186A-Eng-0309.indd 54

    2007-03-13 �� 11:25:19



  • Page 57

    What is Anynet+?
    Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
    all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
    connected.

    Connecting Anynet+ Devices
    The Anynet+ system supports AV devices supporting Anynet+ only.
    Check if there is an Anynet+ mark on the AV device to be connected to the TV.
    To directly connect to TV
    TV

    Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3

    HDMI 1.3 Cable

    HDMI 1.3 Cable

    Connect the [HDMI 1], [HDMI
    2] or [HDMI 3] jack on the TV
    and the HDMI OUT jack of the
    corresponding Anynet+ device
    using the HDMI cable.

    HDMI 1.3 Cable

    To connect to Home Theater
    TV
    Anynet+ Device 1

    HDMI 1.3 Cable
    Home Theater

    HDMI 1.3 Cable

    Anynet+ Device 2

    HDMI 1.3 Cable
    Anynet+ Device 3

    1. Connect the [HDMI 1],
    [HDMI 2] or [HDMI 3]
    jack on the TV and the
    HDMI OUT jack of the
    corresponding Anynet+
    device using the HDMI
    cable.
    2. Connect the HDMI IN jack
    of the home theater and
    the HDMI OUT jack of the
    corresponding Anynet+
    device using the HDMI
    cable.

    HDMI 1.3 Cable

    Optical Cable









    Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on
    the receiver.
    Connect only one receiver.
    You can listen to 5.1 channel sound through the home theater’s speakers. Otherwise, you can only listen
    to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home
    theater and the TV correctly to listen to TV sound through the home theater. However, you cannot listen to
    sound from the BD recorder that is sent to the home theater via the TV in 5.1 channel sound because the
    TV outputs only 2 channel stereo sound. Please see the manual for the home theater.
    You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+
    functions.
    Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
    Anynet+ supports up to 8 AV devices in total.
    English - 55

    BN68-01186A-Eng-0309.indd 55

    2007-03-13 �� 11:25:20



  • Page 58

    Setting Up Anynet+
    The following settings are to use Anynet+ functions.
    Using the Anynet+ Function

    View TV

    1. Press the Anynet+ button.
    Press the ▲ or ▼ button to select Setup, then press the
    ENTER/OK button.
    2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC),
    then press the ENTER/OK button.
    3. Press the ▲ or ▼ button to select On, then press the ENTER/
    OK button.





    Air 28

    The Anynet+ (HDMI-CEC) function is enabled.
    If you select Off, Anynet+ (HDMI-CEC) is disabled.
    When the Anynet+ (HDMI-CEC) function is disabled, all the
    Anynet+ related operations are deactivated.

    Select Device



    Record



    Menu on Device



    Device Operation



    Receiver



    :Off

    Setup

    Move
    Exit



    Enter
    Setup

    Anynet+ (HDMI-CEC)

    : OffOff

    Auto Turn Off

    : OffOn

    Searching Connections
    Move

    Enter

    Return

    Turning an Anynet+ Device Off Automatically when the TV is Turned Off
    1. Press the ▲ or ▼ button to select Auto Turn Off, then press
    Setup
    the ENTER/OK button.
    Anynet+ (HDMI-CEC)
    : On
    2. Press the ▲ or ▼ button to select On, then press the ENTER/
    Auto Turn Off : Off
    OK button.
    Off








    The Auto turn off function is enabled.
    If you select Off, the Auto turn off function is canceled.

    Press the EXIT button to exit.

    Searching Connections
    Move

    On

    Enter

    Return

    The Select Device setting of the TV remote control is to be set to
    TV to use the Anynet+ function.
    If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
    However, if the device is recording, it may not be turned off.

    Scanning and Switching between Anynet+ Devices
    1. Press the Anynet+ button.
    2. Press the ▲ or ▼ button to select Select Device, then press
    the ENTER/OK button.
    3. Press the ▲ or ▼ button to select to a particular device and
    press the ENTER/OK button.
    It is switched to the selected device.
    4. If you cannot find a device you want, press the ▲ or ▼ button
    to select Searching Connections, then press the ENTER/OK
    button.

    The meassage Configuring Anynet+ connection... is
    displayed. When searching devices completes, the connected
    devices are listed in the Anynet+ menu.







    Air 28

    View TV
    Select Device



    Record



    Menu on Device



    Device Operation



    Receiver



    :Off

    Setup

    Move
    Return

    DVDR1
    DVDR2
    DVD1
    DVD2



    Enter
    Setup

    Switching to the selected devices may take up to 2 minutes. You
    Anynet+ (HDMI-CEC)
    : On

    cannot cancel the operation during the switching operation.
    : On

    The time required to scan for devices is determined by the number Auto Turn Off
    of connected devices.
    Searching Connections

    When the device scan is complete, the number of found devices
    is not displayed.
    Move
    Enter
    Return
    Although the TV automatically scans devices when it is turned on
    using the POWER button, devices connected when the TV is on or under a specific circumstance are not
    displayed in the device list. Therefore select Searching Connections menu to search devices.
    If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
    function. Make sure to switch to an Anynet+ device by using the Anynet+ button.
    English - 56

    BN68-01186A-Eng-0309.indd 56

    2007-03-13 �� 11:25:21



  • Page 59

    Anynet+ Menu
    The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
    to the TV.
    Anynet+ Menu
    View TV
    Select Device
    Record
    Menu on Device
    Device Operation
    Receiver
    Setup

    Description
    Switches from Anynet+ to TV broadcast mode.
    Your TV connects to the corresponding device.
    Starts a recording. (This menu works only for a device supporting
    recording.)
    Shows the menu of the connected device.
    Example. When a DVD Recorder is connected, the DVD Recorder’s
    title menu appears.
    Shows the play control menu of the connected device.
    Example. When a DVD Recorder is connected, the play control
    menu of the DVD Recorder appears.
    Sound is output through the receiver.
    You can set the environment for using Anynet+.

    TV Remote Control Buttons Available in Anynet+ Mode
    Device Type

    Anynet+ Device

    Operating Status
    After switching to the
    device, when the menu of
    the corresponding device is
    displayed on the screen.
    After switching to the device,
    while playing a file

    Device with built-in Tuner

    After switching to the device,
    when you are watching a TV
    program

    Audio Device

    When Receiver is activated

    Anyview2

    When watching TV









    Available Buttons
    Numeric buttons
    ▲/▼/◄/►/ENTER buttons
    Color buttons
    EXIT button
    ◄◄(Backward search)
    ►►(Forward search)
    (Stop)
    ►  (Play/Pause)
    CH ▲/▼ button
    VOL +/- button
    MUTE button
    ►  (Play/Pause)

    The Anynet+ function only works when the remote control is set to TV.
    The REC button works only while in the recordable state.
    You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
    devices only using the TV remote control.
    The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
    The Anynet+ functions don’t operate for the products from other manufacturers.
    In Anynet+ mode, the color buttons may not work properly.
    The ◄◄, ►► operations may differ depending on the device.

    Recording
    You can make a recording of a TV program using a recorder.
    Press the REC button.
    Recording begins. (Only when the Anynet+ enabled recording device is connected.)





    The current TV program is recorded in the Watching TV status. If you are watching video from another
    device, the video from the device is recorded.
    You can also record the source streams by selecting Record after pressing the Anynet+ button.
    Before recording, check whether the antenna jack is properly connected to the recording device. For the
    antenna connection to the recording device, refer to its user manual.
    English - 57

    BN68-01186A-Eng-0309.indd 57

    2007-03-13 �� 11:25:21



  • Page 60

    Listening through a Receiver
    You can listen to sound through a receiver instead of the TV speaker.
    1. Press the Anynet+ button.
    Air 28
    Press the ▲ or ▼ button to select Receiver, then press the
    View TV
    ENTER/OK button.
    Select Device
    2. Press the ◄ or ► button to select to On, then press the
    Record
    ENTER/OK button.
    Menu on Device
    Now you can listen to sound through the receiver.
    Device Operation
    3. Press the EXIT button to exit.
    Receiver :On













    When the receiver is set to On, you can listen to the TV sound
    Setup

    through the 2-channel receiver.
    Move
    Enter
    Exit
    If the receiver is exclusively for a home theater only (supporting
    audio only), it may not appear in the device list.
    Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
    In case of a content with copyright problem, listening through the receiver may not properly operate.
    When listening through the receiver, there are restrictions for using the PIP and audio-related menu.

    Check Points before Requesting Service
    Symptom

    Anynet+ does not
    work.

    I want to start
    Anynet+.

    Solution















    I want to exit Anynet+. ■


    The Connecting to
    Anynet+ device…
    message appears on
    the screen.
    The Anynet+ device
    does not play.
    The connected device
    is not displayed.

    The TV program
    cannot be recorded.
    The TV sound is not
    output through the
    receiver.




    Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
    devices only.
    Connect only one receiver.
    Check if the Anynet+ device power cord is properly connected.
    Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
    Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
    Check whether the TV remote control is in TV mode.
    Check whether it is Anynet+ exclusive remote control.
    Anynet+ doesn’t work at a certain condition. (Searching channels)
    When connecting or removing the HDMI 1.3 cable, please make sure to search
    devices again or restart your TV.
    Check if the Anynet+ Function of Anynet+ device is set on.
    Check if the Anynet+ device is properly connected to the TV and check if the
    Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
    Press the TV button on the TV remote control to switch to TV. Then press the
    Anynet+ button to show the Anynet+ menu and select a menu you want.
    Select View TV in Anynet+ menu.
    Press the SOURCE button on the TV remote control and select a device other
    than Anynet+ devices.
    Press any of CH, CH LIST, PRE-CH, and such to change to the
    TV mode. (Note that the channel button operates only when a tuner-embedded
    Anynet+ device is not connected.)
    You cannot use the remote control when you are configuring Anynet+ or
    switching to a view mode.
    Use the remote control when the Anynet+ setting or switching to view mode is
    complete.

    You cannot use the play function when Plug & Play is in progress.






    Check whether or not the device supports Anynet+ functions.
    Check whether or not the HDMI 1.3 cable is properly connected.
    Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
    Search Anynet+ devices again.
    You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
    cables may not support Anynet+ functions.

    Check whether the antenna jack on the recording device is properly connected.
    Connect the optical cable between TV and the receiver.
    English - 58

    BN68-01186A-Eng-0309.indd 58

    2007-03-13 �� 11:25:21



  • Page 61

    Using the Anti-Theft Kensington Lock
    The Kensington lock is a device used to physically fix the system when using it in a public place.
    The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with
    the Kensington lock for proper use.
    1.





    Insert the locking device into
    the Kensington slot on the
    LCD TV (Figure 1), and turn it
    in the locking direction
    (Figure 2).

    2. Connect the Kensington lock

    cable.
    3. Fix the Kensington lock to a

    desk or a heavy stationary

    object.

    Cable

    Figure 2
    Figure 1
    <Optional>



    The place of the Kensington Lock may be
    different depending on its model.

    Troubleshooting: Before Contacting Service Personnel
    No sound or picture

     Check that the mains lead has been connected to a wall socket.
     Check that you have pressed the POWER buttons on the front of the set.
     Check the picture contrast and brightness settings.
     Check the volume.

    Normal picture but no
    sound

     Check the volume.
     Check whether the MUTE button has been pressed on the remote control.
     Check if "Internal Mute" is off

    No picture or black and
    white picture

     Adjust the colour settings.
     Check that the broadcast system selected is correct.

    Sound and picture
    interference

     Try to identify the electrical appliance that is affecting the set and move it
    further away.
     Plug your set into a different mains socket.

    Blurred or snowy picture,
    distorted sound

     Check the direction, location and connections of your aerial.
    This interference is often due to the use of an indoor aerial.

    Remote control malfunctions

     Replace the remote control batteries.
     Clean the upper edge of the remote control (transmission window).
     Check the battery terminals.

    "Check signal cable."
    message is displayed.

     Check that the signal cable is firmly connected to the PC or video sources.
     Check that the PC or video sources are turned on.

    On PC mode, "Not Supported  Check the maximum resolution and the frequency of the video adaptor.
    Mode." message is displayed.  Compare these values with the data in the Display Modes.
    The TFT LCD panel uses a panel consisting of sub pixels (6,220,800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have
    no impact on the performance of the product.
    English - 59

    BN68-01186A-Eng-0309.indd 59

    2007-03-13 �� 11:25:21



  • Page 62

    Technical and Environmental Specifications
    LE37M8

    LE40M8

    LE46M8

    Screen Size (Diagonal)

    37 inch

    40 inch

    46 inch

    Power Consumption

    200 W

    240 W

    260 W

    1920 X 1080 @ 60 Hz

    1920 X 1080 @ 60 Hz

    1920 X 1080 @ 60 Hz

    10 W X 2

    10 W X 2

    10 W X 2

    916 X 87 X 595 mm
    916 X 300 X 654 mm

    971 X 87 X 628 mm
    971 X 300 X 687 mm

    1106 X 104 X 706 mm
    1106 X 326 X 768 mm

    19 Kg

    21 Kg

    30 Kg

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    Model Name

    PC Resolution
    Sound
    Output
    Dimension (WxDxH)
    Body
    With stand
    Weight
    With stand
    Environmental Considerations
    Operating Temperature
    Operating Humidity
    Storage Temperature
    Storage Humidity

    LE52M8

    LE40N8

    LE46N8

    Screen Size (Diagonal)

    52 inch

    40 inch

    46 inch

    Power Consumption

    310 W

    240 W

    260 W

    1920 X 1080 @ 60 Hz

    1920 X 1080 @ 60 Hz

    1920 X 1080 @ 60 Hz

    10 W X 2

    10 W X 2

    10 W X 2

    1257X 111 X 800 mm
    1257 X 326 X 860 mm

    1041 X 97 X 615 mm
    1041 X 290 X 671 mm

    1176 X 114 X 694 mm
    1176 X 320 X 761 mm

    36 Kg

    22 Kg

    31 Kg

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    10 °C to 40 °C (50 °F to 104 °F)
    10 % to 80 %, non-condensing
    -20 °C to 45 °C (-4 °F to 113 °F)
    5 % to 95 %, non-condensing

    Model Name

    PC Resolution
    Sound
    Output
    Dimension (WxDxH)
    Body
    With stand
    Weight
    With stand
    Environmental Considerations
    Operating Temperature
    Operating Humidity
    Storage Temperature
    Storage Humidity

    Stand Swivel (Left / Right)

    -20˚ ~ 20˚

    Design and specifications are subject to change without prior notice.
    This device is a Class B digital apparatus.
    For the power supply, refer to the label attached to the product.

    English - 60

    BN68-01186A-Eng-0309.indd 60

    2007-03-13 �� 11:25:22



  • Page 63

    Warning! Important Safety Instructions
    Please read the appropriate section that corresponds to the marking on your Samsung product before
    attempting to install the product.

    CAUTION

    RISK OF ELECTRIC SHOCK DO NOT OPEN
    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
    DO NOT REMOVE COVER (OR BACK). THERE ARE NO
    USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

    This symbol indicates that high voltage is
    present inside.
    It is dangerous to make any kind of contact
    with any internal part of this product.
    This symbol alerts you that important
    literature concerning operation and maintenance has been included with this product.

    • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
    To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings
    must never be blocked or covered.
    - Do not cover the slots and openings with a cloth or other materials.
    - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
    - Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper venti
    lation is provided.
    • Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
    • Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
    • Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
    • Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry
    tub, in a wet basement, or near a swimming pool etc.).
    If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
    You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
    • Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
    • This apparatus use batteries. In your community there might be regulations that require you to dispose of these
    batteries properly under environmental considerations. Please contact your local authorities for disposal or
    recycling information.
    • To cut off the power source, unplug this apparatus from the wall outlet.
    • Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or
    electric shock.
    • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
    upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit
    from the appliance.
    • To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of
    time, unplug it from the wall outlet and disconnect the antenna or cable system.
    This will prevent damage to the set due to lightning and power line surges.
    • Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC
    adaptor correspondsto the local electrical supply.
    • Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric
    shock.
    • To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
    apparatus.
    • Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
    • Locate this apparatus near an easily accessible AC outlet.
    • If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming
    from it
    - unplug it immediately and contact an authorized dealer or service center.
    • Unplug this apparatus from the AC outlet before any service.
    • Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for
    an extended period of time (especially when children, elderly or disabled people will be left alone in the
    house).
    - Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to
    generate sparks and heat or the insulation to deteriorate.
    • Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or
    low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport,
    the train station etc. Failure to do so may cause serious damage to your set.

    BN68-01186A-Eng-0309.indd 61

    2007-03-13 �� 11:25:22



  • Page 64

    Wiring the Mains Power Supply Plug (UK Only)
    IMPORTANT NOTICE
    The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
    indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
    must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse
    cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available
    from your dealer.
    If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a
    power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
    However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do
    NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
    IMPORTANT
    The wires in the mains lead are coloured in accordance with the following code:
    BLUE - NEUTRAL BROWN - LIVE
    As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
    follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
    or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
    BROWN or RED.
    WARNING:
    DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
    LETTER E OR BY THE EARTH SYMBOL
    , OR COLOURED GREEN OR GREEN AND YELLOW.

    Warranty Card

    United Kingdom
    This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against
    defective materials and workmanship. In the event that warranty service is required, you should return the
    product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
    Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the
    country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
    Samsung Electronics U.K. Ltd.
    Customer Care Centre
    PO Box 17243
    Edinburgh, EH11 4YB
    United Kingdom
    Tel: 0870 SAMSUNG (7267864)(UK & Northern Ireland)
    Tel: 0818 717 100 (Republic of Ireland Only)
    Fax: +44 (0)870 7221127
    Web : www.samsung.com/uk

    WARRANTY CONDITIONS
    1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly
    completed and is presented with the original invoice or sales slip or confirmation, and the serial number on
    the product has not been defaced.
    2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the
    defective part.
    3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
    No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work
    and damage to the products caused by such repair work will not be covered by this warranty.
    4. This product is not considered to be defective in materials nor workmanship by reason that it requires
    adaptation in order to conform to national or local technical or safety standards in force in any Country other
    than the one for which the product was originally designed and manufactured.

    BN68-01186A-Eng-0309.indd 62

    2007-03-13 �� 11:25:23



  • Page 65

    This page is intentionally
    left blank.

    BN68-01186A-Eng-0309.indd 63

    2007-03-13 �� 11:25:23



  • Page 66

    Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
    (Applicable in the European Union and other European countries with separate collection systems)
    This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
    the end of its working life. To prevent possible harm to the environment or human health from
    uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to
    promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally
    safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This
    product should not be mixed with other commercial wastes for disposal.

    BN68-01186A-Eng-0309.indd 64

    2007-03-13 �� 11:25:23






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung LE37M8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Samsung LE37M8 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 6,33 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Samsung LE37M8

Samsung LE37M8 Bedienungsanleitung - Deutsch - 188 seiten

Samsung LE37M8 Bedienungsanleitung - Deutsch, Englisch - 498 seiten

Samsung LE37M8 Bedienungsanleitung - Holländisch - 61 seiten

Samsung LE37M8 Bedienungsanleitung - Holländisch - 498 seiten

Samsung LE37M8 Bedienungsanleitung - Französisch - 188 seiten

Samsung LE37M8 Bedienungsanleitung - Französisch - 498 seiten

Samsung LE37M8 Bedienungsanleitung - Italienisch - 188 seiten

Samsung LE37M8 Bedienungsanleitung - Italienisch, Portugiesisch, Spanisch - 498 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info