Bedienungsanleitung Samsung Sam4S ER-265 (Seite 2 von 101) (Englisch)

573357

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

Precaution Statements

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such

as electrical shock.

1-1 Safety Precautions

1. Be sure that all built-in protective devices are

replaced. Restore any missing protective shields.

2. When reinstalling the chassis and its assemblies,

be sure to restore all protective devices, including

nonmetallic control knobs and compartment

covers.

3. Make sure there are no cabinet openings through

which people - particularly children - might insert

fingers and contact dangerous voltages.

Such openings include excessively wide cabinet

ventilation slots and improperly fitted covers and

drawers.

4. Design Alteration Warning:

Never alter or add to the mechanical or electrical

design of the SECR. Unauthorized alterations

might create a safety hazard. Also, any design

changes or additions will void the manufacturer’s

warranty.

5. Components, parts and wiring that appear to have

overheated or that are otherwise damaged should

be replaced with parts that meet the original

specifications. Always determine the cause of

damage or over- heating, and correct any potential

hazards.

6. Observe the original lead dress, especially near

the following areas: sharp edges, and especially

the AC and high voltage supplies. Always

inspect for pinched, out-of-place, or frayed

wiring. Do not change the spacing between

components and the printed circuit board.

Check the AC power cord for damage. Make

sure that leads and components do not touch

thermally hot parts.

7. Product Safety Notice:

Some electrical and mechanical parts have

special safety-related characteristics that might

not be obvious from visual inspection. These

safety features and the protection they give might

be lost if the replacement component differs

from the original - even if the replacement is

rated for higher voltage, wattage, etc.

Components that are critical for safety are

indicated in the circuit diagram by shading,

(

) or ( ). Use replacement components

that have the same ratings, especially for flame

resistance and dielectric strength specifications.

A replacement part that does not have the same

safety characteristics as the original might create

shock, fire or other hazards.

CAUTION

There is the danger of explosion if battery is

incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose used batteries according to the

manufacturer’s instructions.

ATTENTION

ll y a danger d’explosion s’il y a remplacement

incorrect de la batterie.

Remplacer uniquement avec une batterie du même

type ou d’un type équivalent recommandé par le

constructeur.

Mettre au rebut les batteries usagées conformément

aux instructions du fabricant.

SAFETY NOTICE: "For pluggable equipment, the socket-outlet shall be installed near

the equipment and shall be easily accessible."

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung Sam4S ER-265 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info