Bedienungsanleitung Samsung SP-M251 (Seite 8 von 66) (Englisch)

450071

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Major Safety Precautions 1-3

When cleaning the product, disconnect the

power cord and clean the product with a

soft dry cloth.

• Avoid using chemicals such as wax,

benzene, alcohol, thinner, mosquito-

repellent, fragrance, lubrication or

cleansing agent when cleaning the

product.

This may result in the exterior being

deformed or the print being removed.

When a gas leak occurs, do not touch the

product or the power plug and ventilate

immediately.

• A spark may result in an explosion or

fire.

• During a thunder or lighting storm, do

not touch the power cord or antenna

cable

When not using the product for a long

time, such as leaving your home, unplug

the power cord from the wall outlet.

• Otherwise, it may cause dust

accumulation and result in fire caused

by overheating or a short circuit or

result in an electric shock.

Do not touch the lens on the product.

• This may cause damage to the lens.

If the product is installed in a location

where the operating conditions vary con-

siderably, a serious quality problem may

occur due to the surrounding environment.

In this case, install the product only after

consulting our Call Center.

• Places exposed to microscopic dust,

chemicals, too high or low temperature,

high humidity, such as airports or

stations where the product is

continuously used for a long time etc..

Do not touch any outer part of the product

with tools such as a knife or a hammer.

If you drop the product or the case is dam-

aged, turn the power off and unplug the

power cord. Contact a service center.

• Failing to do so may result in fire or

electric shock.

To clean dirt or stains on the front projec-

tion lens, use spray or a wet cloth damp-

ened with neutral detergent and water.

Make sure to place your remote control on

a table or desk.

• If you step on the remote control, you

may fall and hurt yourself or the

product may be damaged.

Ask a Service Center to clean the interior

of the projector at least once per year.

To avoid burning yourself, do not touch the

vents or lamp cover while operating or

right after turning off the product.

Do not clean the product using water spray

or a wet cloth. Avoid using any chemicals

such as detergents, industrial or automo-

tive polish, abrasive, wax, benzene, alco-

hol on any plastic part of the product such

as projector case, since this may cause

damage.

Do not open any cover on the product.

• This would prove hazardous because

of high-voltage current inside the

product.

Do not use any undesignated battery.

Be careful not to touch the ventilation hole

while the projector is on as hot air comes

out.

The ventilation hole is hot for some time

though the projector is turned off. Keep

you hands or body off the ventilation hole.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SP-M251 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung SP-M251

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info