Bedienungsanleitung Sangean ATS-909X2 (Seite 18 von 19) (Englisch)

797034

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

USING THE AUX IN JACK

You can listen to the sound of an external device through

your ATS-909X2's speaker. To do this, simply connect the

external device (such as iPod, MP3 player or CD player)

to the radio's AUX IN jack (35) using a 3.5mm audio

cable and then press the AUX IN button (39). The audio

output of the external device will now be played through

the speaker of your ATS-909X2 and the volume can be

adjusted using the radio's Volume Control (12).

USING THE REC STANDBY / LINE-OUT

JACKS

These jacks on the left side of the radio can be used to

output audio (LINE OUT/38) and activate an external

recorder using a timer (REC. STANDBY / 37) utilizing a 2.5

or 3.5mm audio cable.

Both jacks can be connected to the LINE IN (or AUX IN)

jack of an external device to record or play the programs

received by the ATS-909X2. The REC. STANDBY jack

has the additional benefit of being able to activate certain

external recorders, such as Sangean’s DAR-101, using an

alarm timer on the ATS-909X2.

Refer to your external recorder's user manual to determine

whether your external recording device is compatible

with timer activated recording. More details about how

to set the alarm of the ATS-909X2 can be found in the

"SETTING AN ALARM TIMER" section above.

● For more information on the SANGEAN DAR-101

Digital Audio Recorder, which supports timer recordings

using the REC. STANDBY (37) and LINE OUT (38)

jacks, go to: https://www.sangean.com/products/

product.asp?mid=166&cid=9

NOTE

The LINE OUT jack (38) differ from the Headphones

jack (42). The volume level of the Headphones jack (42)

varies depending on the volume of the radio. The LINE

OUT jack (38) have a xed volume level, so the output

level is consistent regardless of the position of the

Volume Control (12) or Tone Control switch (14).

WARNING

Don't connect the AUX IN jack (35) of the ATS-909X2

to a LINE OUT jack of an external recorder, while also

connecting either the LINE OUT jack (38) to the AUX IN

jack of an external recorder.

USING THE HEADPHONE JACK

Plug a pair of headphones with a 3.5mm plug into the

Headphones jack (42) on the left side of the ATS-909X2

to listen to the radio using headphones. When a pair

of headphones is connected to the radio, the internal

speaker is automatically muted.

USING THE RESET SWITCH

The Reset Switch (46) at the bottom of the radio will

reset the time and microprocessor of the radio only. All

settings, alarm timers and preset stations will still be

available in the radio's memory. After using this switch,

the time can be reprogrammed following the instructions

in the "SETTING YOUR LOCAL TIME AND TIME ZONE"

section in chapter 3.

TECHNICAL DATA AND

SPECIFICATIONS

TECHNICAL DATA

WAVEBANDS FREQUENCY (MHz)

AIR 118MHz - 137MHz

FM (VHF)

87.5-108 MHz (USA version)

76-108 MHz (European version)

64-108 MHz (Russian version)

AM / MW AM: 520-1710 kHz (USA version)

MW: 522-1710 kHz (European version)

LW 153-519 kHz (USA version)

100-519 kHz (European version)

SW (Shortwave) 1.711-29.999 MHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean ATS-909X2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean ATS-909X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info