110306
8
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
3.Press the button marked M (memory), display M and suggested preset number
will flash, press ENTER to store your station in that memory position.
4.Preset positions may be exchanged easily. Select preset station that is to be
changed, press memory button ( M and existing memory position will flash).
select new preset position. Preset will be exchanged automatically.
5.SW band has 18 presets (in two pages).When presets 1-9 are full, press PAGE
button to select Page 2. Display will show M2. and an additional 1-9 presets can
be set for a total of 18 presets.
Note:
1. If all presets have been used, pushing M button will display FULL on LCD.
If you still desire to store new station, push any button of 1-9 where new station
is to be stored and hold for more than 2 seconds. New station will be put into
memory in position selected and original station in this position will be replaced.
2. All preset stations are indicated by on the display. If a station has already
1. Turn on the radio by pressing the POWER on/off button.
2. Select the waveband for the station required.
3. Press the numbered button corresponding to the preset memory location for the
required station. The radio will instantly tune to the station and display will show
its frequency and memory location.
1.Turn on the radio by pressing the POWER on/of button.
2.Press BAND button to select the SW waveband.
3.Press SW SELECT button to select the required SW meter band, display will
appear low end frequency and SW meter band it belongs to. This radio covers
SW 120 to 11 meter band.
This radio provides an easy to use feature called APS (Auto Preset System) which
operated on FM, MW and LW bands.
1.Turn on the radio by pressing POWER on/off button.
2.Press BAND button to select the required waveband.
been put into the memory. it will show preset position on display.
Recalling a station
Select Short Wave Meter Band
APS (auto Preset System)
7
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sangean ATS505 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info