Bedienungsanleitung Sangean DPR-64 (Seite 16 von 19) (Englisch)

797046

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

‘Weekends’: the alarm will sound only at weekends

‘Weekdays’: the alarm will sound on weekdays only

‘Daily’: the alarm will sound everyday Press the Select button

to conrm the setting.

8. Press the Tuning up/down button to choose the desired alarm

source (DAB, FM, Buzzer).

Press the Select button to conrm the setting. If setting alarm

to Buzzer proceed to step 10.

9. If setting the alarm to a radio option, press the Tuning up/

down button to choose from either the radio station 'Last

listened' to, or from the presets. Press the Select button to

conrm the selection.

Note: The alarm may only use a preset which has already

been stored.

10. Press the Tuning up/down button to choose your desired volume

and press the Select button to confirm the setting. Your radio

will show “Alarm Saved” and exit the alarm setting screen.

Alarms are indicated in the display by the alarm symbol and the

corresponding alarm number (e.g. or ).

Note: When the radio is in standby mode, you can also press

the Alarm 1 button or Alarm 2 button to activate or disable the

alarms.

When the alarm sounds

The alarm will sound at the selected times for up to 60 minutes

unless cancelled. The maximum volume used for the alarm will

be specied during the alarm setting procedure. When your radio

is set to wake by the radio alarm, your radio will switch to the

selected radio station. If the radio cannot connect to the specied

the radio station, the buzzer will be used instead.

To cancel a sounding alarm, press and hold the Power button to

cancel a sounding alarm.

Note: If the radio is switched on because of a radio alarm you can

control basic functions such as the volume control.

When the alarm activates it will start softly and gradually increase

in level. The radio will automatically switch back to standby mode

when the 60 minutes have elapsed.

Snooze timer

1. When the radio alarm sounds, pressing any button other

than the Volume up/down button will silence the alarm for the

selected number of minutes. When the buzzer alarm sounds,

press any button. This will silence the alarm for the selected

number of minutes. The Snooze time can be adjusted between

5 and 20 minutes in 5 minute increments. Default setting is 10

minutes.

2. The snooze duration can only be set while the radio is playing.

To adjust the silence time for the snooze timer, press and hold

the Menu button to access the menu for the current mode.

3. Press the Tuning up/down button until 'Snooze Duration' is shown

on the display. Press the Select button to enter the setting.

4. Press the Tuning up/down button to choose the desired snooze

time to 5, 10, 15 or 20 minutes. Press the Select button to

conrm the setting. If “Off” is selected, when the alarm sounds,

pressing any button will not silence the alarm.

5. While the snooze timer is active the symbol “Z” is ashed on

the display.

6. In order to cancel the Snooze timer while the alarm is

suspended, press and hold the Power button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean DPR-64 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean DPR-64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info