33545
5
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
Prior to making any connections to your TV set, be sure to turn the POWER off.
For a more detailed understanding of each connection, it is recommended that you read the
instruction manual for each connected component.
If you use video or audio equipment placed near the TV, picture and/or sound may become
distorted due to interference between these components.
In such a case, separate each piece of equipment at a sufficient distance.
The following shows examples for connecting external equipment.
Do not connect another audio source to the same speaker to which the TV set is connected;
otherwise it may damage the amplifier of the TV set or that of the other audio source.
(1) Rear Input Jacks
Use these input jacks to connect your VCR or DVD player for viewing.
1. A/V 1 IN jacks
2. S-VHS jack
To view a connected video source, press VIDEO button on the front panel or remote control.
98
(2) Front Input Jacks
Please use the front jacks (VIDEO 2) for a GAME-PLAYER or CAMCORDER.
To view a connected video source, press VIDEO button to set the TV to the VIDEO 2 mode.
(3) Audio System Connectors
The audio signal available at these jacks is the same as the audio source of the program being
monitored on this TV screen.
1. Adjust the volume of the TV to minimum.
2. Connect the AUDIO OUT jacks on the rear of the set with the AUDIO LINE IN jacks of your
audio system through an optional AUDIO/VIDEO cable.
3. Set the INPUT SELECTION switch on the AMPLIFIER/AUDIO SYSTEM into the AUX
position and adjust the volume.
NOTES
You can hear the sound of TV in more vivid stereo through audio system.
If you have no "AUX IN" jack on your audio system, connect to CD or Video jacks.
L (MONO) R
VIDEO AUDIO
TO VIDEO OUT
TO AUDIO OUTS
Video game,
Camcorder or VCR
SPEAKERS
AMPLIFIER/AUDIO SYSTEM
AUDIO LINE INs
VIDEO/AUDIO CONNECTIONS
NOTES In the case that sound output of your VCR is MONO, connect it to "AUDIO IN L
(MONO)" Jack of your TV. Then the sound can be heard from both R and L
speakers.
VHF/UHF
OUTPUT
TO VIDEO OUT
VCR or DVD
TO AUDIO OUT
TO VIDEO IN
TO AUDIO IN
S-VHS OUT
TO AUDIO OUT
TO AUDIO IN
DVD
8
from CATV
or antenna
This connection is optional
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanyo AVM27D11 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info