33665
6
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Connecting a DVD Player or other equipment
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect a DVD Player or other digital equipment’s interlaced Component Video Output to
the TV Component Video Input (Y-Pb-Pr) Jacks.
Connect the DVD Player’s Audio Output to the TV A/V2 Audio Input (L/R) Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L)
input jacks.
Connect equipment to the component inputs or A/V2 inputs, but not both sets at
the same time.
Using the Component Video and Audio Input Jacks
QuickTips
You may be able
to use the TV
remote control
to operate your
DVD Player. (See
pages 9 ~11).
A solid Blue screen
with COMPONENT2
displayed means
that the Compo-
nent Video mode
is selected, but
no signal is being
detected at the Com-
ponent jacks. Check
connection, and
turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Y
P
B
/C
B
/C
R
P
R
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75
PR
PB
Y
VIDEO
COMPONENT
2
S-VIDEO
DVD Player
TV Back
What you will need for connections:
Component video cable – 1
Audio Cable – 1
RESETINPUT
POWER
VCR TV AUX
Remote Control
Press INPUT key after
connecting cables to access the A/V
inputs.
There is NO need to tune to a blank
channel.
Connecting a Video Game or other equipment
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect game Audio Output (R/L) to the TV Audio Input (R/L).
Then connect game Video Output to the TV Video Input.
Press POWER to turn on the TV. Turn on external equipment
also.
To access Audio/Video inputs, press the INPUT key to select
GAME or select using the menu.
Using the Front Video and Audio Input Jacks
6
Component / Front A/V Input Jacks
What you will need for connections:
Audio / Video cable – 1
VIDEO IN L- AUDIO -R
MENU CH VOL POWER
VIDEO IN L- AUDIO -R
Video Game
Camecorder
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanyo DS24424 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info