19036
64
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
-E63-
TROUBLESHOOTING GUIDE
If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check
the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.
SYMPTOM
No power.
The power is on, but the DVD/VCR does
not work.
No picture.
No sound.
Sound is heard from only one speaker.
The playback picture is poor.
The DVD/VCR does not start playback.
On music CD - sound only comes from
front left and right speakers.
No sound from rear and center speakers.
CORRECTIVE ACTION
Plug the power cord into the wall outlet securely.
Insert a tape or disc. (See page E27 or E39)
Set theTVs video channel to 3 or 4.
Select the appropriate video input mode on the
TV so the picture from the DVD/VCR appears on
the TV screen.
Press [TV/VCR] on the remote control repeatedly
to choose VCR mode. VCR appears on the FL
display.
Connect the video cable securely.
Connect the video cable into the jack. (See page
E10.)
Connect the 75 ohm coaxial cable into the jack.
(See page E10.)
Connect the cord correctly. See Basic TV
Connections or Audio/Video Connection on page
E10.
Turn on the TV.
Load a playable disc. (Check the disc logo, type,
color system and regional code.) (See page E38.)
Connect the audio cable securely.
Select the correct function. (See page E20.)
Connect the speaker wires firmly to the speaker
terminals. (See page E14.)
Turn up the volume.
Connect the speaker wires firmly to the speaker
terminals. (See page E14.)
Clean the disc. (See page E38.)
Clean video heads. (See page E65.)
Use [Tracking] +/ for manual tracking adjustment
while tape is playing. (See page E29.)
Load a playable disc. (Check the disc logo, type,
color system and regional code.) (See page E38.)
Insert a tape or disc. (See page E27 or E39.)
Load a playable disc. (Check the disc type, color
system, and regional code.) (See page E38.)
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the
guide.
Clean the disc. (See page E38.)
Cancel the parental lock function or change the
rating level. Reset it after play. (See page E59.)
Press [SURROUND] repeatedly to select Surr,
HALL or LIVE. (See page E21.)
POSSIBLE CAUSE
The power cord is disconnected.
No tape is inserted.
No disc is inserted.
The video channel of the TV is not set to channel
3 or 4.
The TV is not set to receive DVD/VCR signal
output.
TV/VCR mode for DVD/VCR is set to TV.
The video cable is not connected securely.
The video cable or 75 ohm coaxial cable is not
connected.
Video connection is not correct.
Note: S-Video/component out does not output the
VCR/tuner video signal. They are only for DVD
video output.
The connected TV power is turned off.
An unplayable disc is loaded.
The audio cables are not connected securely.
The wrong function is selected.
Faulty speaker connections.
Volume control is set to minimum.
Faulty speaker connections.
The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on another VCR.
An unplayable disc is loaded.
No tape is inserted.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
•“PARENTAL is set.
Unit automatically sets 2.1 channel (Front left and
right speakers, and Subwoofer).
2B80201A [E] P50-BACK 24/2/03, 7:16 PM63
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanyo DWM3500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info