Bedienungsanleitung Saro Felix 213-40011 (Seite 16 von 17) (Deutsch, Englisch)

801541

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

16 Stand 03/17 TM

ENGLISH

GENERAL INFORMATION STAINLESS STEEL ARTICLES / FURNITURE

INITIAL CLEANING OF STAINLESS STEEL ARTICLES / FURNITURE

From the Saro sortiment we can recommend the stainless steel cleaner R50 with the Saro order no.: 192-1000, in a 400 ml spray can

(with only pure air as propellant). R50 degreases, protects and shines in one operation.

Stainless steel is a collective term for stainless steels, for more or less complex alloys of iron and other metals.

Under the inuence of oxygen and air, these alloys form a thin protective layer on their surface, which is only a few

atomic layers thick. The so-called passive layer.

This passive layer can also be formed over and over again, provided that the surface is shiny and free of impurities.

However, a fallacy is that stainless steel cannot rust at all. In case of insucient protection or care, this is possible.

Initial cleaning is also important.

The surfaces may become soiled during manufacture, transport, storage and assembly.

(e. g.: Deposition of grinding dust, chips, welding spatter, soot or by abrasion of foreign material may lead to ash

rust).

This rusting of foreign material on the stainless steel surface leads to damage and penetration of the passive layer.

This local damage can then lead to pitting in the stainless steel.

That‘s why initial cleaning is so important, not only for hygienic reasons.

Please do not use the following cleaning agents under any circumstances:

Chlorine- or chloride-containing, with hydrochloric acid (in acidic cleaners), sulphuric acid or other aggressive

cleaning agents. These cause discoloration (black) of the stainless steel or damage the passive layer for

corrosion protection.

CAUTION

• Seasoning concentrates such as mustard, acetic or citric acid essences, saline solutions, seasoning tablets and

similar can also damage the stainless steel surface if they are not removed immediately.

• Scratches are caused by the use of scouring milk, scrapers, metal / pot sponges, steel wool and other hard

objects.

• During use, damage may be caused by other movable equipment made of hard material such as stainless steel

or similar, which may be pulled over the stainless steel surfaces, for example. Pay attention to this, too.

• Use a damp and warm cloth/sponge/eece for cleaning, also a microbre cloth without metal parts.

• Stubborn dirt can be removed by placing a damp cloth (also a kitchen roll) on this spot for 10 to 20 minutes to

facilitate cleaning.

• Any residual detergent must be removed by wiping with clear water. Then rub the surfaces dry with a soft

cloth/sponge.

• For rough cleaning, use a soft brush after pouring out the ash collector to remove stuck ash residues.

CLEANING OF STAINLESS STEEL ARTICLES

GENERAL NOTE MAINTENANCE OF STAINLESS STEEL ARTICLES / FURNITURE

• When using care products such as stainless steel cleaners, the surface is optimally protected.

• If necessary, ll the body with an 18-litre garbage bag.

• Clean the product regularly in compliance with the hygiene regulations.

• For rough cleaning, use a soft brush after pouring out the ash collector to remove stuck ash residues.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saro Felix 213-40011 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info