Bedienungsanleitung Satel CA-10 (Seite 2 von 2) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

The below table presents the functions performed by the MST-1 module:

CODE DESCRIPTION

[0][#] End of connection with the control panel

[1][#] Checking the status of partition 1

[2][#] Checking the status of partition 2

[3][#] Checking the status of partition 3 (it relates to the CA-10 plus control panel)

[4][#] Checking the status of partition 4 (it relates to the CA-10 plus control panel)

[9][#] Checking zones status

[CODE][#] Arming/disarming, alarm clearing

[CODE][¼][4] Zones bypass

[CODE][¼][5] Silent arming

[CODE][¼][7] Controlling of the output of ”MONO switch” type

[CODE][¼][8] Controlling of the output of ”BI switch” type

The control is performed using DTMF signals of the telephone keyboard. To call the selected function

press sequentially telephone keys in accordance with the calling method as shown in the table.

Partition status signalling:

• three short beeps – partition disarmed;

• four short and one long beeps - partition armed.

Alarm in a partition or memory of an alarm are signalled with a series of short beeps (changing from

high to low) that last approx. 2,5 seconds directly after signals informing on partition status.

The function ”Checking zone status” can readout the information, which of keypad’s LEDs shine with a

steady light and which of them are blinking. During co-operation with CA-10 control panel the module

informs in accordance with the settings of service functions FS 12 do FS 15.

The indication of a zone of an armed partition means memory of an alarm triggered by this zone, while

the indication of a zone of a disarmed partition means violation of the zone. In the CA-6 control panel

the number of a diode relates to the number of a zone, while in the CA-10 plus control panel the installer

himself defines the numbers of zones to be indicated by LEDs of the keypad assigned to the partition

(such keypad needs to be connected to the control panel). It is possible to check the status of LEDs

numbered from 1 to 12.

The method of checking the zone status

• After the first calling of the function [9][#], the module generates short beeps, the number of which is

equal to the lowest number of a shining LED. If none of LEDs shines, the module generates two

long beeps.

• The subsequent calling of the function [9][#] indicates the next LED, which is shining. The review

needs to be continued till hearing two long signals informing that there are no more LEDs shining.

The repeated calling the function (after two long signals) will restart the review of zone status.

• In order to check the zones status in the control panel CA-10 plus, first it is necessary to check the

status of one of zones through calling an appropriate function: ([1][#]; [2][#]; [3][#] or [4][#]), and

afterwards to check the status of its zones with the function [9][#]. Each of zones needs to be called

separately.

User functions, protected with a code, are performed in an identical way as during using the control

panel’s keypad (see description in the user manual). Acoustic signalling is identical with signalling of the

keypad. To go into the mode of control of other partitions in CA-10 plus press [1][#]; [2][#]; [3][#] or

[4][#].

The performance of the remaining user functions

, functions of ”hold down” type, partitions quick arming

and entering the service mode through the MST-1 module is blocked

The function [0][#] breaks the phone connection. Similarly the control panel finishes the connection if for

30 seconds it doesn’t receive any DTMF signal from a telephone set.

SATEL sp. z o.o.

ul. Schuberta 79

80-

172 Gdańsk

POLAND

tel. (+48 58) 320 94 00

info@satel.pl

www.satel.pl

Latest EC declaration of conformity

and product approval certificates can

be downloaded from our Web site

www.satel.pl

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info