Bedienungsanleitung Satel CA-5 Plus (Seite 3 von 20) (Englisch)

699583

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

SECURITY SYSTEM...........................................................................................

USER ..................................................................................................................

TELEPHONE NUMBER ......................................................................................

ADDRESS...........................................................................................................

REMARKS...........................................................................................................

............................................................................................................................

The mode of operation of the alarm control panel is defined by the security system

parameters. Changing these parameters makes it possible to adapt the panel operation to

individual needs of the protected site. The initial settings, or the so-called „defaults”, are

indicated in the description of each service function.

The service functions allow changes in the settings of particular system parameters to be

made by means of the keypad. Such changes can only be made when the control panel is

not armed and when it signals no alarm.

The parameters can also be changed remotely by means of the computer and the DLOAD10

program. In order to do so, the „downloading” (DWNL) function of the control panel must be

used (see description in the CA-5

NSTALLER

ANUAL

). The program makes it possible to

assign names to the users and zones. Such names will be displayed when viewing the

memory log in the LCD keypad or on the computer screen.

ACTIVATION OF SERVICE MODE

To change any parameter by means of the service function, activate the service mode in the

control panel ([SERVICE CODE] [#]), enter the number of the corresponding service function

and press the [#] key. The numbers and descriptions of functions are included hereunder in

this manual.

It is also possible to call the service mode without entering the service code. With this aim

you should:

• disconnect the control panel power supply (first the mains, then the battery),

• put a jumper on the RESET pins on the control panel mainboard,

• reconnect the control panel power supply: first the battery, then the mains – the LED

keypad will start blinking with all its LEDs and generating short beeps; the LCD keypad will

display a “No CLK signal” massage and generate short beeps,

• remove the jumper – the keypads will confirm the panel entering the service mode by four

short and one long beeps; in the LED keypad, the [

PROGRAM

] diode will light up; in the

LCD keypad, the service mode menu will display.

This procedure is colloquially known as the entry „from pins” (see: description of function FS 9).

PROGRAMMING WITH LED KEYPAD

Having called the service function, check the current setup or enter new data. The way of

data entry is described in subsequent sections. Press [#] in order to memorize the new

setting of a parameter, or press [

] and hold down until you hear two long beeps, or,

alternatively, press in turn [

][#] to quit the function without making any changes.

Checking the setup of numeric parameters (which require numbers to be entered) is possible

by double pressing the [

] key. Displayed in the binary system on the LEDs (2–5) are

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-5 Plus Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-5 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info