711991
7
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Preparations for start-up
Charging the battery
1. The symbol " " on the LC display indicates
that the battery is depleted. Connect the product to a
USB port of a PC or a USB charger with the micro
USB cable.
2. The battery symbol in the LC display flashes or the
battery charge is indicated in per cent.
3. The battery symbol goes out when the battery is
full.
Setting the timer and the temperature display
1. Open the lock of the ON/OFF button (see figure on
page 8).
2. With the device switched off, press and hold the
MEMORY button until the flashing year is displayed.
Set the year with the ON/OFF button.
3. Press the MEMORY button again to enter the
setting of the month, day, hours and minutes.
4. Then "CL" is displayed. Press the ON/OFF button
"on" for constant display of the time or "off" to hide
the time. Up to 4 alarm times (AL1 - AL4) can be set.
When an alarm is set, the alarm time is displayed.
5. Press the MEMORY button once more to enter the
temperature display. Toggle between °C, °F, and no
temperature display (oFF) with the ON/OFF button.
Complete all settings by pressing the MEMORY
button. The alarm times are not activated by locking
the ON/OFF button.
- 10 -
Possible variations of the blood pressure during a
day:
How to obtain reliable measurement values?
For reliable measurement values, please follow our
recommendations:
1. Always make the measurement at the same time
and under the same conditions.
2. Do not eat, smoke or move during the
measurement. Do not drink coffee or consume
alcohol within 30 minutes before the measurement.
3. Remove tight clothing from your wrist and make
sure that the area for the cuff is free.
4. Sit upright at the table and relax for about 5
minutes to ensure that the measurement is made in
a steady atmosphere.
5. If you want to repeat the measurement, wait at
least 5 minutes.
- 7 -
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scala SC7400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info