GB
- 27 -
Playing music
1. Insert the connector of the turned on stereo transmitter
into the 3,5 mm socket of the source device.
2. Make sure the receiver is turned on and within10 meters
of the transmitter.
3. The red and blue LED from the transmitter indicates
that a Bluetooth connection exists by flashing slowly at
same time.
4. If the connection disappears, the sound is disrupted or
breaks down: Move the receiver nearer to the transmitter.
Put the receiver in search mode and it will connect
again automatically. If the connection does not automati-
cally follow, start the pairing process again.
Please note:
1. If for any reason the stereo transmitter does not play any
music, it should be restarted.(See chapter about pairing.)
2. Normally, the connection between the transmitter and the
receiver is established once the pairing process is done.
The connection can break for the following reasons:
- The distance between the devices is greater than 10
meters or an obstacle stands between the devices.
- One or both of the devices have been turned off or
must be recharged.
