690871
28
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
- 28 -
User Manual | 09.2018 | v01
www.schaererusa.com Warranty Information
Vendor. The service technician will make an on-site assessment of whether or not a repair is covered under warranty.
If the customer has questions about warranty coverage or disputes the technician’s decision that a service call is
not covered under manufacturer’s warranty, please contact Schaerer USA at 888-989-3004 to discuss warranty
coverage.
Preventative Maintenance Calls
Two preventative maintenance visits shall be included. These visits shall be scheduled in or near the 2nd and 4th
quarter and need to take place during normal business hours. Schaerer USA will coordinate scheduling through
its Service Vendors. In the event that the store or site does not make itself available for a PM visit, Schaerer USA
reserves the right to void its obligation toward this visit and the warranty in general.
Schaerer USA Corporation is entitled to utilize customer-initiated service visits to perform the preventative
maintenance inspection, should one occur during or near the respective PM dates.
Components/Parts Covered Under Warranty
The following major internal components are covered under this contract:
Control Board PC-Board
Pump Head Pump Motor
Flow Meter Brewing Unit (Automat)
Brew Valve Tea Valve
Steam Valve Temperature Probe (internal damage)
Water Boiler Steam Boiler
Grinders Grinder Motors
Brew Group Drive Motor Position switches (internal damage)
Transformer Card Reader
Display (internal damage) Air Pump
Warranty Exceptions
Examples of components NOT covered under this contract, excluding manufacturer defects:
Paneling (Shell) Bean Hopper
Cup Warmer Plate Drip Tray
O-rings Product Buttons (external damage)
Temperature Probe (external damage) Espresso Spout
Steam Wand Hot Water Spout
Grinder Blades (normal wear and tear) Display (external)
Chip Cards
Examples of major component malfunctions NOT covered under manufacturer’s warranty:
Any valve that is clogged or damaged by calcium or other solids/deposits.
Any sensor is covered with calcium or other solids/deposits.
Any boiler lled with solids/deposits that needs to be replaced.
Any damage due to cartridge residue reaching the machine because it was not ushed properly.
Examples of operator error, misuse, abuse, neglect, lack of cleaning, etc., issues that are NOT covered under
manufacturer’s warranty:
• Clogged brew group/automat due to lack of cleaning.
Any clogging of the drip tray or cracks in the drip tray.
• Foreign objects (coins, small stones, plastic objects, etc.) in the grinders.
• Position switches, inside the automat/brew group area, bent by the operator.
Calibration complaints (beverage volume and temperature) based on measurements not following the
correct measuring procedure.
• Main waterline being turned off.
The examples listed above do not represent an exhaustive list of the errors that might be encountered. They are
examples only. Terms and conditions of this contract are subject to change.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Schaerer Coffee Art Plus 20BTN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info