Bedienungsanleitung Schaub Lorenz RW210 (Seite 16 von 20) (Deutsch, Englisch)

652760

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

16 - EN

the date correctly.

5. Press the respective ALARM button again. If you have selected “1 - 1” for intervall you

are now being asked to select the day on which the alarm should sound (1 = Monday, 2 =

Tuesday, 3 = Wednesday, 4= Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday). Select the

desired day using the buttons ◄◄ (7) and ►► (8).

6. Press the respective ALARM button again. The alarm mode starts ashing. Select either

buzzer (“bu”) or radio using the buttons ◄◄ (7) and ►► (8).

When selecting radio, the last set frequency will ash.

7. Press the respective ALARM button again. If you selected buzzer (“bu”) as alarm mode

the setting is nished and the display will switch back to the clock display.

When you selected radio as alarm mode, the volume starts ashing. Select the desired

radio volume using the buttons ◄◄ (7) and ►► (8). When the alarm goes on the radio

volume will increase until it reaches the set volume.

8. Press the respective ALARM button again. The setting is nished and the display will

switch back to the clock display.

9. The ALARM indicator is lit indicating that the alarm is active.

Functions

Activating/Deactivating an Alarm

• To deactivate a previously set alarm, press and hold the respective ALARM button (1 or

2) during regular clock display for 2 seconds until the alarm indicator disappears. This

alarm is now deactivated and will not ring.

• To activate a previously set alarm, press and hold the respective ALARM button (1 or 2)

during regular clock display for 2 seconds until the alarm indicator appears in the display.

This alarm will now ring at the previously set time.

Alarm Duration and Stopping an Alarm

Once active the alarm (buzzer or radio) will sound for 30 minutes. To stop the active alarm,

press the respective ALARM button (1 or 2) or the ON/OFF button (9) once. The alarm will stop

and come back on again at the set time.

Snooze Function

The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the

SNOOZE button (5) once while the alarm is active. The alarm will stop and come on again after

9 minutes. To cancel this function, press the ON/OFF button (9) once.

Nap Function

The nap function enables you to set a timer after which the buzzer will sound.

• During clock display mode, repeatedly press the NAP button (1) to select a desired dura-

tion until the buzzer sounds.

• You can select 90, 80, 70, 60, 50, 40, 30, 20, or 10 minutes.

• To check the remaining time on the timer, press the NAP button (1) once.

• To disable the alarm once it sounds, press the ON/OFF button (9).

• If you want to cancel the function, press the NAP button (1) repeatedly until “OFF” ap-

pears in the display.

Date Display

• To display the date, press the Y-M-D button (7) once during regular clock display. This will

show the year.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz RW210 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info