Bedienungsanleitung Scheppach DH1200MAX (Seite 12 von 44) (Deutsch, Englisch, Holländisch, Französisch)

781646

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

12 GB

• Avoid body contact with earthed or grounded sur-

faces, such as pipes, radiators, ranges and refrige-

rators. There is an increased risk of electric shock if

your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

• Do not abuse the cord. Never use the cord for carry-

ing, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges and moving parts.

Damaged or entangled cords increase the risk of

electric shock.

• When operating a power tool outdoors, use an ex-

tension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

• If operating a power tool in a damp location is una-

voidable, use a residual current device (RCD) pro-

tected supply. Use of an RCD reduces the risk of

electric shock.

Personal safety

• Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use

a power tool while you are tired or under the inu-

ence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in

serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will redu-

ce personal injuries.

• Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your nger on the switch

or energising power tools that have the switch on

invites accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in perso-

nal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it

was designed.

• Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be con-

trolled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures redu-

ce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or hese instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

• Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s ope-

ration. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dif-

ferent from those intended could result in a hazar-

dous situation.

Service

• Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is main-

tained.

Hammer Safety Warnings

• Wear ear protectors. Exposure to noise can cause

hearing loss.

• Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting ac-

cessory may contact hidden wiring or its own cord.

Cutting accessory contacting a “live” wire may ma-

ke exposed metal parts of the power tool “live” and

could give the operator an electric shock.

• Use suitable detectors to determine if utility lines

are hidden in the work area or call the local utility

company for assistance. Contact with electric lines

can lead to re and electric shock. Damaging a gas

line can lead to explosion. Penetrating a water line

causes property damage or may cause an electric

shock.

• When working with the machine, always hold it rm-

ly with both hands and provide for a secure stance.

The power tool is guided more secure with both

hands.

• Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure

than by hand.

• Always wait until the machine has come to a com-

Scheppach DH1200MAX Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info