Bedienungsanleitung Scheppach GG7800 (Seite 7 von 48) (Alle Sprachen)

644557

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

english 9

IMPORTANT NOTE:

• Hold on to small work pieces with a pair of pliers or

similar tool.

• Never grind on the side of the wheels!

• As most materials gain heat while being grinded please

be careful with the work piece.

CHANGING THE GRINDING WHEELS

IMPORTANT NOTE: In order to prevent injuries from acci-

dentally starting the machine the machine’s main switch

must be turned off before changing a grinding wheel. Pull

power plug!

• Loosen the spark gard and the eye shield and pull out

• as far as possible. Do not remove these parts!

• Loosen work rest and pull out as far as possible.

• Dissemble screws and pull off end plate.

• Take off outside ﬂange and the old grinding wheel, then

assmeble the new one.

Important note:

• Do not remove the pieces of card board on the sides of

the wheel, as they are intended for strengthening the

grip of the Flange against the grinding wheels.

• Examine the new grinding wheels on cracks or other

visible damages and dispose if necessary.

• Mount ﬂange and nut again.

• Do not tighten the screw by force. This can cause the

grinding wheel to break.

• Mount end plate.

• Mount work rest, spark guard and eye shield according

to installation instructions.

m Proper Use

The machine meets the currently valid EU machine directive.

• The manufacturer’s safety, operation and maintenance

instructions as well as the technical data given in the

calibrations and dimensions must be adhered to.

• Relevant accident prevention regulations and other gen-

erally recognized safety and technical rules must also

be adhered to.

• The machine may only be used, maintained or repaired

by trained persons who are familiar with the machine

and have been informed about the dangers. Unauthor-

ized modiﬁcations of the machine exclude a liability

of the manufacturer for damages resulting from the

modiﬁcations.

• The machine is intended for use only with original spare

parts and original tools from the producer.

• Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting dam-

ages, the risk is exclusively borne by the user.

m Remaining hazards

The machine has been built using modern technology and

in accordance with recognized safety rules. Some hazards,

however, may still remain.

• The grinding wheel poses a danger of injury to ﬁngers

and hands by improper feeding or placement of tools.

• Danger of injury from thrown tools due to improper

holding or feeding.

• The use of incorrect or damaged mains cables can lead

to electrical injuries.

• Although having regarded all considerable rules there

may still remain not obvious remaining hazrds.

• Minimize remaining hazards by following the instruc-

tions in ”Safety Rules”, ”Use only as authorized” and

in the entire operating manual.

EC Declaration of Conformity GB

We herewith declare, scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH, Günzburger Str. 69, D-89335

Ichenhausen that the machine described below due to its construction

and design and in the version delivered by us complies with the relevant

provisions of the following EC Directives.

In case of a modiﬁcation of the machine this declaration ceases to be

valid.

Machine description:

Bench Grinder

Machine type:

GG7600/Art.Nr. 5903101901

GG7800/Art.Nr. 5903102901

Relevant EC directives:

EC machine directive 2006/42/EG,

EC Low voltage directive 2006/95/EWG,

EC-EMV directive 2004/108/EWG.

Applied harmonized European standards

EN 12100-1, EN 12100-2, EN 13857, , EN 60 204-1

Place, date:

Ichenhausen, 13.07.2010

Signature:

On behalf of Werner Hartmann (technical director)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach GG7800 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info