Bedienungsanleitung Scheppach TPX710 (Seite 24 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

782037

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

24 GB

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions.

In order to prevent the risk of serious or deadly inju-

ries, we recommend that persons with medical im-

plants consult with their physician and the manufactu-

rer of the medical implant prior to operating the electric

tool.

3 Safety of persons

–Be careful, watch what you are doing and use an elec-

tric tool sensibly. Do not use the tool if you are tired or

under the inuence of drugs, alcohol or medication. A

moment of inattention when using the electric tool can

result in serious injuries.

–Wear personal protection equipment and always wear

safety goggles. Wearing personal protection (such as

dust masks, non-slip safety shoes, safety helmet or

ear protection, depending upon the type and use of

the electric tool) reduces the risk of injury.

–Make sure that the appliance cannot start up acciden-

tally. Ensure that the electric tool is switched o󰀨 before

you connect it to the power supply and/or insert the

battery, or pick up or carry the tool. If your nger is

on the switch whilst carrying the electric tool or if you

connect the appliance to the mains when it is switched

on, this can lead to accidents.

–Remove keys and wrenches before switching on the

electric tool. A tool or key which comes into contact

with rotating parts of the appliance can lead to injuries.

–Avoid abnormal working postures. Make sure you

stand squarely and keep your balance at all times.

In this way, you can control the electric tool better in

unexpected circumstances.

–Wear suitable work clothes. Do not wear loose clothing

or jewellery. Keep hair, clothes and gloves away from

moving parts. Loose clothing, jewellery or long hair

can get trapped in moving parts.

–If vacuuming devices and draining devices can be t-

ted, make sure that these are correctly attached and

correctly used. The use of a dust extraction system

can reduce the danger posed by dust.

4 Usage and treatment of the electric tool

–Do not overload the appliance. Use the correct tool for

your work. You will be able to work better and more

safely within the given performance boundaries.

–Do not use an electric tool with a defective switch.

An electric tool that cannot be switched on or o󰀨 is

dangerous and must be repaired.

–Pull the plug out of the socket and/or remove the bat-

tery before making any adjustments to the appliance,

changing accessories or put the appliance down. This

safety measure prevents starting the electric tool un-

intentionally.

–Keep unused electric tools out of the reach of child-

ren. Do not allow people who are not familiar with the

appliance or who have not read these instructions to

use the appliance. Electric tools are dangerous if they

are used by inexperienced people.

–Clean your electric tool carefully. Check whether mo-

ving parts are functioning properly and not jamming,

whether parts are broken or damaged enough that

the functioning of this electric tool is a󰀨ected. Have

damaged parts repaired before using the appliance.

Many accidents are caused by badly maintained elec-

tric tools.

–Keep your cutting tools sharp and clean. Carefully

maintained cutting tools with sharp cutting edges will

jam less and are easier to control.

–Make sure to use electric tools, accessories, attach-

ments, etc. in accordance with these instructions. Take

the conditions in your work area and the job in hand

into account. Using electric tools for any purpose other

than the one for which they are intended can lead to

dangerous situations.

5 Service

–Have your electric tool repaired only by trained per-

sonnel using only genuine spare parts. This will ensure

that your electric tool remains safe to use.

Safety regulations for hedge trimmers

–Make sure you keep all parts of your body away from

the blades. Never attempt to remove the cuttings with

the blades running or to hold material you wish to cut.

Always switch o󰀨 the equipment before attempting to

remove any jammed cuttings. A single moment of ca-

relessness when using the hedge trimmer can result

in serious injuries.

–Carry the hedge trimmer by its handle and make sure

the blades have stopped. Always t the protective co-

ver when transporting the hedge trimmer or putting it

into storage. Careful handling of the equipment redu-

ces the likelihood of injury by the blades.

–Hold the electric tool by the insulated handles, be-

cause the blade may come into contact with the tool’s

own mains lead. Contact between the blade and a live

cable can also make the metal parts of the equipment

live and will cause an electric shock.

–Keep the cable out of the cutting zone. During ope-

ration the cable may be covered by hedges and cut

through by accident.

Specic safety information

Please read this safety information and the directions

for use carefully and be sure to follow the instructions

to the letter.

1 Always remove the power plug from the socketoutlet

before you perform any work on the hedge trimmer, e.g.

–repairing a damaged cable

–cleaning the blades

–troubleshooting

–cleaning and maintenance or before leaving the

tool unattended.

2 The hedge trimmer can cause serious injuries! Read

the directions for use carefully in order to acquaint

yourself with the correct way to handle, set up, ser-

vice, start and put down the machine. Familiarize

yourself with all the machine’s control elements and

its proper use.

Scheppach TPX710 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info