779961
7
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
ENGLISHENGLISH
PIVOT MAINTENANCE
The pivot and bearings on the SCOTT Genius are easy to maintain.
If you have to change the bearings or pivots please consult your local SCOTT dealer for the
purchase and fitting of the kit as special tools are required for disassembly and reassembly.
To prolong the life of your pivot bearings an external treatment with water repellent after
every bike wash will help repel excess water. We do not recommend heavy grease sprays
since these will leave a film on the parts which are difficult to remove. We recommend the
same for the chain also after washing and before chain lube.
IMPORTANT
Do not let spray or oils come into contact with the disc brake pads or rotor!
Please refer to the manuals supplied with this bike for wash and care instructions for your
SCOTT bike.
WHEELS
The SCOTT Genius frame is incredibly versatile with the option to change your wheel size
from 29" to 27.5" and 27.5" plus with minimal effort, to do this the following tire sizes must be
observed:
-27.5 plus / 2.8" (71mm) tire
-29 / 2.6" (66mm) tire
Even when following these tire sizes you must always double check the clearance as tire
sizes may vary with different brands.
The SCOTT Genius is equipped with a Geometry chip, this can be altered if you wish to
adjust the geometry on your SCOTT Genius to tune the handling of your bike.
CABLE ROUTING
On the SCOTT Genius the cable guides on the headtube can be changed if required so
different cable configurations can be used.
The main cover plate of the cable guide is available in two options:
-HT-Blank: this can be used when no cables are to be routed.
-HT: this is open and can be used for different cable options.
If cables are to be routed you must select the correct insert for the cover depending on the
configuration you require, the inserts can be easily changed in cover plate once the cables
have been removed and the cover removed from the bike.
If the bike is equipped with small 27.5" tires and set in the "Low mode" crank clearance
must be checked before riding!
Low mode” for 29" tires. High mode” for 29" and 27.5 tires.
Please ensure the geo chip is in the same position for both the left and right sides.
IMPORTANT
While the SCOTT Genius frame is compatible with different wheel sizes this does not
mean the fork fitted will be compatible, please check with your local SCOTT dealer if
there are any compatibility/clearance questions before carrying out any wheel changes.
As with all parts on your SCOTT bike please ensure all bolts are set to the correct torque
and threadloc used where applicable/ geo chip bolt 10 N/M and 242 (medium strength)
threadloc.
13 |
BIKE USER MANUAL | GENIUSGENIUS | BIKE USER MANUAL
| 12
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scott Genius 2018 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Scott Genius 2018

Scott Genius 2018 Bedienungsanleitung - Deutsch - 10 seiten

Scott Genius 2018 Bedienungsanleitung - Französisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info