779969
9
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
ENGLISHENGLISH
Please be aware, to prevent damage to the frame and cables there should be minimum cable
clearance between the bottom of the bottom bracket and the cables.
The measurement should be a minimum of 25mm taken in the centre line of the bottom
bracket, as indicated in the image.
BB STANDARDS/FD MOUNTING DETAILS
The SCOTT SPARK has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this
is a press fit system and special tools are required for removal and refitting, please contact
your SCOTT dealer for assistance.
The SCOTT SPARK (non RC models) uses a high direct mount side swing front derailleur
only, this must be used with the use of an FD adaptor plate.
It is not possible to mount a front
derailleur to RC frames/bikes.
ADJUSTMENT
We recommend all adjustments are carried out by your local authorized SCOTT dealer but
basic maintenance and checks should be done regularly before each ride as described in the
general manual that was supplied with your bike.
Please pay attention to all instructions and torque settings, if you have any doubts please
contact your dealer,
*in addition to the torque settings please note all bikes with a dropper type seatpost
have a seatpost clamp maximum torque of 5 N/M.
The inserts are marked
A-E, these letters dictate
what cables can be used;
these are the same for left
and right.
HT:
this is the cover plate
for all cable options
A:
1x Mechanical cable
D:
1x single cable & Di2
HT-Blank:
this is the no cable option
B:
2x Mechanical cables
E:
Single cable and
Live valve
C:
2x mechanical cables
1x hydraulic
If you wish to change or replace the headtube cableguide set
on your SCOTT Spark this kit can be ordered from your local
SCOTT dealer.
SCOTT part number: 266587 and consists of:
2x HT/A/B/C/D
1x HT-Blank/E
These cable guides are fitted with a single bolt, the fixing torque of this must not exceed
0.75-1 N/M.
With the many different cabling options it is possible to customise the cable routing slightly
depending what components you wish to run, it is recommended that handlebar cables
that come from the right hand side enter the frame on the left, and handlebar cables that
come from the left hand side enter the frame on the right, while this is not crucial to the
performance of the bike it may help to
prevent any cable rub
Below is an example of a bike set up
European style” with a 1X set up and a
dropper seatpost.
Please note that below is an example
and that your bikes brakes need to be
set up as per the law in your country,
please check with your local SCOTT
dealer for this information.
17 |
BIKE USER MANUAL | SPARK MY2017SPARK MY2017 | BIKE USER MANUAL
| 16
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scott Spark 2018 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Scott Spark 2018

Scott Spark 2018 Bedienungsanleitung - Deutsch - 10 seiten

Scott Spark 2018 Bedienungsanleitung - Französisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info