Bedienungsanleitung Seally SAC41.V2 (Seite 2 von 4) (Englisch)

517405

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

2. SPECIFICATION

3. OPERATION

Motor Power: .....................................230V

Cooler: .......................................... 70W

Heater: ......................................1000W/2000W

Anion Density: ..............................2 million/cm³

Maximum Air Flow: .............................350mtr³/hr

Cooling Water Tank: ........................................8.0ltr

Weight: ..........................................6.5kg

fig.1

Original Language Version

SAC41.V2 Issue: 1 - 17/01/10

3.1. CONTROL PANEL FUNCTIONS.

3.1.1. Heat/Cool Air Selection Control (on side of unit - fig.1)

Before the heater functions can be used this lever must be moved to the HEAT position. When the cooling functions are required move

the lever to the COOL position.

3.1.2. Timer

By pressing the timer button, the timer can be set to switch off the unit, in periods of time from 0.5 to 7.5 hours in half hour increments. As you

press the button the four indicator lights above it will illuminate in different combinations. The time period selected is indicated by adding

together the time values above each illuminated light. To turn the timer off, advance the timer setting to 7.5 hours (all four lights illuminated),

then press the button once more and the timer is switched off.

NOTE: If the timer is not selected, the unit will continue to work in the mode that it is set, until the unit is switched off manually.

3.1.3. Wind

The direction of the air flow coming out of the unit is controlled by two sets of louvres. The horizontal louvres on the front of the

machine can be manually adjusted up or down. Behind these louvres is a second set of electrically driven vertical louvres which can be

made to oscillate from side to side by pressing the Wind button. An indicator light will illuminate above the button to show that the louvres are

working. To cancel the movement, press the button again. The indicator light will go out.

3.1.4. Speed

There are three speeds available: High, Medium, Low. Press the button to cycle through these until the desired speed is reached.

NOTE: In Heat mode, only two fan speeds are available: Medium and Low.

3.1.5. Heat

Before switching to the Heat function, make sure that the air flow control lever is moved to the HEAT position. This unit contains a special

heater with a Positive Temperature Coefficient element. Press the button to cycle through the available heating options. One press will

illuminate the PTC1 indicator which is equivalent to 1000Watts. A second press will illuminate both PTC1 and PTC2 indicators, which is

equivalent to 2000Watts. A third press switches the heater off.

3.1.6. Cool

Before switching to the cooling function make sure that the air flow control lever is moved to the COOL position. Press the button once to

activate the cooling function. The ‘Icy Breeze’ indicator light above the button will illuminate. To stop the cooling function, press the button

again and the indicator light will go out.

3.1.7. On/Off

When the unit is plugged in, it will beep to show that it is in Standby mode. Switch the unit on by pressing the ON/OFF button. The power

indicator above the button will illuminate.

Multifunction 4-in-1 unit comprising Air Cooler, Heater, Humidifier and Air Purifier. Features a 3-speed fan, adjustable airflow direction and

timer. Refrigerant-free cooling is achieved by evaporating water, which can be enhanced by adding ice. Fan-assisted heating function with two

settings. Air purification is achieved by negative ion generation and an activated carbon filter. Supplied with electronic remote control. Mounted

on castors for manoeuvrability.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seally SAC41.V2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info