Bedienungsanleitung SEG DPP 1025-070 LE (Seite 2 von 14) (Englisch)

491074

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

(13) Unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to

lightning and power-line surges.

(14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

(15) Power Sources- This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery power, or other sources, refer to the

operating instructions.

(16) Protective Attachment Plug-The product is equipped with an attachment plug having overload protection.

This is a safety feature. See instruction manual for replacement or resetting of protective device. If

replacement of the plug is required, be sure the service technician has used a replacement plug specified

by the manufacturer that has the same overload protection as the original plug.

(17) Outdoor Antenna Grounding- If an outside antenna or cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some protection against voltage surges and built-up

static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard

to proper grounding conductors, location or antenna- discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

(18) Power lines- An outside antenna system should not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

(19) Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

(20) Object and Liquid Entry- Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

(21) Servicing -Do no attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

(22) Replacement Parts-When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric, or other hazards.

(23) Safety Check- Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.

Safety Precautions

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to

the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient

magnitude to constitute risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Dangerous high voltage is present inside the enclosure. Do not open the cabinet.

CAUTION: To prevent electric shock, match wide blade plug to wide slot, and fully insert.

CAUTION: This Digital Video Disc Player employs a laser System. To prevent direct exposure to the

laser beam, do not try to open the enclosure. When open and the interlocks are defeated,

visible laser radiation is present.

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure. DO NOT STARE INTO BEAM.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital

device. Pursuant with the FCC Rules,Part 15. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not installed

and used in accordance with the instruction may cause harmful interference to radio

communication.

NOTICE: This product incorporates copyright protection technology that is protected by U.S. patents

and other intellectual property rights. Use of this copyright protection technology must be

authorized by Macrovision, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD-DO NOT OPEN

AVIS: RISOUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

SEG DPP 1025-070 LE Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SEG DPP 1025-070 LE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info