Bedienungsanleitung Seiko 6R15 (Seite 10 von 11) (Englisch)

593678

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

English

ACCURACY OF MECHANICAL WATCHES

● The accuracy of mechanical watches is indicated by the daily rates of one week

or so.

● The accuracy of mechanical watches may not fall within the speciﬁed range of

time accuracy because of loss/gain changes due to the conditions of use, such as

the length of time during which the watch is worn on the wrist, arm movement,

whether the mainspring is wound up fully or not, etc.

● The key components in mechanical watches are made of metals which expand

or contract depending on temperatures due to metal properties. This exerts an

effect on the accuracy of the watches. Mechanical watches tend to lose time at

high temperatures while they tend to gain time at low temperatures.

● In order to improve accuracy, it is important to regularly supply energy to the

balance that controls the speed of the gears. The driving force of the mainspring

that powers mechanical watches varies between when it is fully wound and im-

mediately before it is unwound. As the mainspring unwinds, the force weakens.

Relatively steady accuracy can be obtained by wearing the watch on the wrist fre-

quently for the self-winding type and winding up the mainspring fully everyday

at a ﬁxed time to move it regularly for the wind-up mechanical type.

Problem

The watch gains/loses

temporarily.

The date change at 12

o’clock noon.

The power supplied by the

mainspring has been

consumed.

The watch is worn on your

wrist only for a short period

of time, or the amount of

arm movement is small.

The watch has been left in

extremely high or low

temperatures for a long time.

The watch was brought into

close contact with a

magnetic object.

You dropped the watch, hit it against

a hard surface or wore it while

playing active sports. The watch was

exposed to strong vibrations.

Normal accuracy will resume when the

watch returns to normal temperature.

Normal accuracy will resume when the watch is kept away from

close contact with the magnetic source. If this condition persists,

consult the retailer from whom the watch was purchased.

Normal accuracy will not resume.

Consult the retailer from whom the

watch was purchased.

Consult the retailer from whom the

watch was purchased.

Advance the hands by 12 hours.

Consult the retailer from whom the

watch was purchased.

AM/PM is not properly set.

Water got inside the watch

due to the deterioration of

the gasket, etc.

The watch has not been

overhauled for more than 3 years.

Possible causes

The watch stops

operating.

Even though you wear the

watch every day, it soon

stops operating.

The glass is blurred and

the blur persists for a

long time.

*For the solution of troubles other than listed above, contact the retailer from whom the watch was purchased.

Solutions

Turn the crown or swing the watch to wind it up. The

watch will start operating. If the watch does not start,

consult the retailer from whom the watch was purchased.

Wear the watch for an extended period of

time, or when taking off the watch, turn the

crown to wind the mainspring.

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko 6R15 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko 6R15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info