757414

Seiko 7B72 Seite 19

19
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
01 2
Push the
crown
back in
Adjusting the time and date by receiving a radio signal
“How to conduct manual reception (Receive a radio signal manually)” → P.56
When the watch is unable to receive a radio signal, refer to
“How to manually set the time” → P.59
“How to manually set the date” → P.61
* When the crown is a screw lock type, lock it. → P.13
5When this operation is complete, press
the crown to return.
This ends the preliminary position alignment mode,
and the seconds hand, and hours and minute
hands start to move.
When the watch returns to the time display mode,
check if the time and date are correct.
If the time and date are not correct, manually set
them.
EN 68
7
TROUBLESHOOTING
Troubleshooting
At trouble Possible causes Solutions
Reference
Hand
Movement
The seconds hand moves
at two-second intervals.
The energy depletion forewarning
function is activated. (P.36)
If the seconds hand moves at two- or
five-second intervals while you wear
the watch everyday, the watch is in a
condition where it cannot acquire
sufficient light, for instance, the watch
is concealed under a long sleeve shirt.
Fully charge the watch so that the
seconds hand may move at one-second
intervals.
Be careful not to conceal the watch
under a sleeve, etc., while wearing it.
When taking off the watch, place it in as
bright a location as possible.
P.34
The seconds hand moves
at five-second intervals.
The stopped seconds
hand pointing to the
15-second position
started operating.
The power save function has been
activated. (P.37)
When the watch is not exposed to
adequate light for a certain period of
time, the power save function to limit
energy consumption is automatically
activated.
Wait until the current time is displayed.
No operation is needed. (This is not a
malfunction.)
-
EN 69
7
TROUBLESHOOTING
At trouble Possible causes Solutions
Reference
Hand
Movement
The stopped seconds
hand pointing to the
45-second position
started operating.
The power save function has been
activated. (P.37)
When the watch is not exposed to
adequate light for a certain period of
time, the power save function to limit
energy consumption is automatically
activated.
1.
Fully charge the watch so that
the seconds hand may move at
one-second intervals.
2.
After that, if the watch displays
the incorrect time, receive a
radio wave as needed.
P.17,
P.34
The watch hands advance
rapidly unless a button is
pressed. After the rapid
advancement is
completed, the watch
resumes its normal
movement.
The power save function has been
activated. (P.37)
The automatic hand position alignment
function was activated. (P.64)
When the hand positions deviate to
display incorrect time as a result of
external influences, etc., the watch
automatically corrects the hand
misalignment by the automatic hand
position alignment function.
No operation is needed. (This is not a
malfunction.) -
EN 70
7
TROUBLESHOOTING
At trouble Possible causes Solutions
Reference
Reception
of a radio
signal
The watch is unable to
receive a radio signal.
The reception results have
failed and the seconds
hand points to N (the watch
does not receive a radio
signal).
The watch was moved while it was
receiving a radio signal.
(It takes 12 minutes at the longest to
receive a radio signal successfully.)
Do not move the watch while it is
receiving a radio signal.
Because it takes time to receive a radio
signal successfully, leave the watch
untouched for 12 minutes at the longest.
P.23,
P.57
The watch was left where the radio
signal was weak or where it was unable
to receive a radio signal. (P.24)
Place the watch where it is able to easily
receive a radio signal. P.23
Transmitting stations may have
stopped transmitting radio signals for
some reason. (Transmission stop)
Check the website of each transmitting
station for further information
concerning a transmission stop.
Attempt to receive a radio signal again
after a while.
P.25
The time difference is set to regions
other than the radio signal reception
ranges.
1. Check the set time difference and
set the correct time difference.
2. When the watch is not displaying the
precise time, receive a radio signal
again if necessary.
P.17,
P.29
EN 71
7
TROUBLESHOOTING
… 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Seiko 7B72 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info