Bedienungsanleitung Seiko Cal. 6A32 (Seite 4 von 8) (Englisch)

464472

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

English

TIME/DATE SETTING

CROWN

➠

Pull out to second click when Second hand

is at the 12 o’clock position.

▼

Turn in either direction to set the time and

date.

▼

Push back completely in accordance with

a time signal.

1. The date changes between 11:00 p.m. and 1:00 a.m. while the watch is in operation or when advancing

the hands by turning the crown clockwise, and between 9:00 p.m. and 10:00 p.m. when moving the

hands back by turning the crown counterclockwise. Therefore, note the following.

[AM/PM checking]

When setting the hour hand, check that AM/PM is correctly set.

*When setting the time by advancing the hands, turn the hour hand past the 1 o’clock marker. If the date

advances, the time is set for the AM period. If it does not change, the time is set for the PM period.

*When setting the time by turning back the hands, turn the hour hand past the 9 o’clock marker. If the

date moves back, the time is set for the PM period. If it does not change, the time is set for the AM

period.

2. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back

to the exact time.

●Follow the procedures below to check the calendar, and if necessary, to adjust it.

●Do not check and adjust the calendar between 11:00 p.m. and 1:00 a.m. If the calendar

is checked and adjusted between 11:00 p.m. and 1:00 a.m., the date may not change

properly. In such case, first change the time to any time outside this period, and then

set the date. After that, move the hands back to the correct time.

●If the crown is pulled out to the second click while the numeral in the calendar frame

is advancing or moving back, the second hand may be misaligned from the 12 o’clock

position (initial position).

●The button and crown operation cannot be made while the numeral in the calendar

frame is advancing or moving back. Press the button or turn the crown after the

numeral stops.

●If the watch is left untouched for more than 2 or 3 minutes while checking or adjusting

the calendar, the watch will resume normal movement. In such a case, start again

from the beginning of the procedures in “HOW TO CHECK AND ADJUST THE

CALENDAR.”

●Do not leave the crown at the first or second click when you use the watch, as this will

shorten the battery life.

HOW TO CHECK AND ADJUST THE CALENDAR

3. If the calendar indication is not correct after setting the time and date, check that AM/PM is correctly set.

If the calendar indication is still not correct even though AM/PM is correctly set, the initial position of the

calendar may not be set correctly. In such a case, adjust the initial position of the calendar following the

procedures in "HOW TO CHECK AND ADJUST THE CALENDAR."

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko Cal. 6A32 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko Cal. 6A32

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info