CPress repeatedly to select the digits (flashing) to be adjusted.
HOURMINUTES
▼
▼
APress to set the flashing digits.
*The digits move quickly if Button A is kept pressed.
B
▼
After all the adjustments are completed, press to return to the ALARM display.
*The alarm mark and alarm on mark will be automatically displayed.
HOW TO RESET THE BUILT-IN IC
AUTOMATIC SHUT-OFF FUNCTION
▲
When the automatic shut-off function is set to “ON” in the TIME/
CALENDAR SETTING display, the following energy-saving functions
will be activated to help extend the battery life.
●Regardless of the display modes, when the stopwatch is left
untouched for one hour, the display becomes blank in order to
minimize battery consumption.
●The current time will be displayed once every 10 seconds even
while the display is blank, to indicate that the blank display is not
caused by battery exhaustion.
●While the stopwatch or timer is measuring, the display will not
become blank for the energy-saving functions.
●If the alarm is engaged, the alarm will sound at the designated
time even while the display is blank.
●To return to the normal display, press either Button A, B, C or D.
The last display before it became blank will be shown.
Automatic shut-off mark
When the automatic shut-off
function is set to “ON,” this mark
appears in any display mode
except while the stopwatch is in
the setting mode.
HOW TO STOP THE ALARM MANUALLY WHILE SOUNDING
●The alarm sounds for approximately 20 seconds at the designated time and automatically stops.
●Press any of buttons A, B, C, or D to stop the alarm while sounding.
*If the alarm time coincides with time-up time while the Double repeat time is counting, the time-up beep is activated first.
When an abnormal display (broken digits, etc.) appears, follow the procedure below. The built-in IC will be reset and the watch will resume
normal operation.
HOW TO RESET THE IC
Be sure to press buttons A, B, C, and D at the same time for 2 to 3 seconds. The display will become blank, and then “Sun ’06 1-1 A12:00 will
be displayed. Set the time, calendar and alarm before using the watch.
*Please note that if the IC is reset, all data of the MEMO function is deleted.
BATTERY CHANGE
The miniature battery which powers your stopwatch should last approximately 3 years (or approximately 7 years if the ECO mode is activated). However,
because the battery is inserted at the factory to check the function and performance of the stopwatch, its actual life once in your possession may be less
than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we
recommend that you contact an AUTHORIZED SEIKO DEALER and request a SEIKO CR2032 battery.
●
If the stopwatch is used for more than 3 hours a day, the Double Repeat Timer function is used more than 5 times a day, the confirmation sound for button operation
rings more than 50 times a day, or if the alarm is used more than once a day, the battery life may be less than the specified period.
●Battery life indicator
SPECIFICATIONS
1.Frequency of crystal oscillator......................32,768Hz (Hz = Hertz … Cycles per second)
2.Accuracy......................................................... 0.0012% or 30 seconds per month at normal temperature (25ºC 3)
3.Operational temperature range....................–10ºC - +60ºC
4.Desirable temperature range of use.............0ºC - 50ºC
5.Display system
TIME/CALENDAR display........................Hour, minutes, seconds, year, month, date and day of the week
(The calendar automatically adjusts for odd and even months including February of leap years from January 1, 2006
to December 31, 2055.)
STOPWATCH display..............................2 rows of digital displays and a dot matrix display (5 x 35 dots)
Hour, minutes, seconds and 1/10 DM (Measures up to 99999.9 DM)
LAP TIME display/ LAP TIME IN PROGRESS display/SPLIT TIME display
Up to 100 sets of lap times and split times can be stored in memory.
TIMER display..........................................Timer 1 and Timer 2 displays
Hour, minutes, seconds, the number of times the countdown was repeated and the number of times the countdown
is to be repeated.
ALARM display........................................Alarm time (hour, minute), current time (hour, minute, second)
6.Display medium.............................................Nematic Liquid Crystal, FEM (Field Effect Mode)
8.Battery life....................................................... Approximately 3 years (or approximately 7 years if the automatic shut-off function is activated)
*The specifications are subject to change without prior notice for product improvement.
*Even though the display is flashing, time accuracy is not affected.
When all the segments of the display start flashing in the TIME/CALENDAR display, or when “ ” mark starts flashing in other displays, the stopwatch may run down
in 2 to 3 days. We suggest that you have the battery replaced by a SEIKO DEALER.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Seiko S05A wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
