Bedienungsanleitung Seiko V131 (Seite 11 von 13) (Englisch)

757539

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

●Polyurethane band

•A polyurethane band is susceptible to discoloration from light, and may be deteriorated by solvent or

atmospheric humidity.

•Especially a translucent, white, or pale colored band easily adsorbs other colors, resulting in color smears

or discoloration.

• Wash out dirt in water and clean it off with a dry cloth.

(Protect the watch body from water splashes by wrapping it up in plastic wrap etc.)

• When the band becomes less flexible, have the band replaced with a new one. If you continue to use

the band as it is, the band may develop cracks or become brittle over time.

●Silicone band

• As for material characteristics, the band is easily dirtied, and may be stained and discolored.

Wipe off dirt with a wet cloth or cleaning tissue.

• Unlike bands of other materials, cracks may result in the band being cut. Take care not to damage the

band with an edged tool.

Notes on skin

irritation and

allergy

Skin irritation caused by a band may result from various factors such as allergy to

metals or leathers, or skin reactions against friction on dust or the band itself.

Notes on the

length of the band

Adjust the band to allow a little clearance with your wrist to ensure proper

airflow.

When wearing the watch, leave enough room to insert a finger between

the band and your wrist.

EN 36

TO PRESERVE THE QUALITY OF YOUR WATCH

How to use the diver adjuster

If your watch’s metallic band has the Diver Adjuster function, the length of the band can be easily

adjusted.

It is very useful when you wear the watch over a wet suit or winter clothing.

Flap 20° 90°

Band on the

6 o’clock side

of the watch

1Lift up the flap approximately

90°until it stands upright, and

then press the flap down

further approximately 20°and

lightly hold it.

• When doing so, take care not to push

the flap forcibly. Although you may feel

slight resistance, doing this requires

only a light force.

2Lightly pull the band on the

6 o’clock side of the watch

along the curved line of the

band to pull out the slider.

• Doing this requires only a light force.

Take care not to pull the band forcibly.

• The slider can be pulled out

approximately 30 mm. Take care not

to pull it out more than this limit.

EN 37

TO PRESERVE THE QUALITY OF YOUR WATCH

Clasp Push button

Flap

(4-2)

Clasp

(4-1)

3While pressing the push

button, lift up the clasp to

release the buckle, and place

the watch on your wrist.

4Close the clasp (4-1) first and

then, the flap (4-2).

5Hold both sides of the band to

adjust the length of the slider

until it fits snugly around your

wrist.

EN 38

TO PRESERVE THE QUALITY OF YOUR WATCH

How to use the diver extender

If your watch’s metallic band has the Diver Extender function, the length of the band can be easily

adjusted.

It is very useful when you wear the watch over a wet suit or winter clothing.

Flap

Clasp

Push button

1Lift up the flap.

2While pressing the push

button, open the clasp.

• After opening the clasp, push the flap

back to the normal position for safety’s

sake.

EN 39

TO PRESERVE THE QUALITY OF YOUR WATCH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko V131 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info