758885
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
02/2020
- 5 -
Copyright © 2020, Fast ČR, a.s.
EN Intelligent Contact Grill
User'smanual
Prior to using this appliance, please read the user’smanual thoroughly, even in cases, when one has
already familiarised themselves with previous use of similar types of appliances. Only use the appliance
in the manner described in this user’smanual. Keep this user’smanual in asafe place where it can be
easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility
statement of the vendor or warranty card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend that you pack the appliance in
the original box from the manufacturer.
DESCRIPTION OF THE CONTACT GRILL
A1 Top grill plate cover
A2 Handle
serves to open the grill.
A3 Top grill plate release button
A4 Removable flat top grill plate
with aflush-mounted heating element
A5 Bottom grill plate release button
A6 Removable ribbed bottom grill plate
with aflush-mounted heating element
A7 Control panel with LED indicators
A8 Removable drip tray (not shown)
slides out of the rear part of the base.
A9 Top grill plate hinge lock release button
A10 Base unit
A11 Anti-slip feet
DESCRIPTION OF THE CONTROL PANEL
B1 On/Off button of the grill
B2 Manual grill mode button
B3 Food category selection button
FROZEN FOOD,
BACON,
CHICKEN,
SAUSAGE,
STEAK,
FISH,
BURGER.
B4 Grill plate preheating phase indicator
B5 Grill-ready status indicator
signals that it is necessary to place food
on the grill plate.
B6 Food doneness indicators
RARE,
MEDIUM,
WELL DONE.
B7 Confirm selection button
TOP GRILL PLATE OPERATING POSITIONS
This contact grill can be used with the top grill plate A4 positioned in three different positions.
In the automatic mode, the grill can only be used with the top grill plate A4 tilted down. In the manual
mode, the grill can be used with the top grill plate A4 tilted down, tilted open vertically or flush with
the bottom grill plate A6. When using the grill with the top grill plate A4 set to the vertical position, it
is necessary to tilt it up fully.
To tilt open the top grill plate A4 to be flush with the bottom grill plate A6, proceed as follows. When the
top grill plate A4 is tilted down or slightly elevated above the bottom grill plate A6, use the index finger
on one hand to hold down button A9 and with the other hand tilt open the top grill plate A4 using the
handle A2 so that the handle A2 rests on the tabletop or kitchen countertop. This doubles the grilling
area. After tilting open the top grill plate A4, release button A9. The top grill plate A4 may only be set flush
with the bottom grill plate A6 when the grill is disconnected from the power socket and cooled down.
REMOVING AND ATTACHING THE GRILL PLATES
Prior to removing or attaching the grill plates, the grill must be turned off, disconnected from the
power socket and have cooled down. Using the handle A2, fully tilt open the top grill plate cover A1
to the vertical position.
To remove the top grill plate A4, use the index finger on one hand to hold down button A3 and remove
the grill plate A4 using the other hand. After removing the top grill plate A4, release button A3. In the
same way, remove the bottom grill plate A6. To release the bottom grill plate A6, use button A5.
To attach it, insert the top grill plate A4 into the top cover A1 so that the tabs on the rear part of the
cover A1 slide into the rear edge of the top grill plate A4. Then push the top grill plate A4 against the
cover A1 so that the clip and the contacts of the heating element on the underside of the top grill plate
A4 slide into place in the cover A1. In the same way, attach the bottom grill plate A6 to the base A10.
Attention:
Before attaching the grill plates A4 and A6 to the grill, make sure that they
are completely dry.
Note:
Grill plates A4 andA6 are fully interchangeable.
NON-STICK COATING ON THE GRILL PLATES
The grill plates on the contact grill have aspecial non-stick surface coating. This coating enables you
to prepare healthier meals while using aminimum amount of fat or oil.
To place food on to agrill plate or to remove it, use wooden or heat resistant plastic kitchen utensils
Do not use sharp or metal kitchen utensils and do not cut the food directly on the grill plate.
The manufacturer takes no responsibility for damage to the surface of the grill plates caused by
inappropriate use.
Achange in the colour of the surface of the grill plates has no effect on the functionality of the appliance.
BEFORE FIRST USE
Remove the contact grill from the packaging material and remove all promotional materials from it
including labels which may be located on the grill plates. Wipe the grill plates A4 and A6 using aclean,
lightly dampened cloth with the addition of asmall amount of neutral kitchen detergent. After applying
the detergent, thoroughly wipe the grill plates A4 and A6 using aclean, lightly dampened cloth and
wipe them dry. Remove the removable drip tray A8 from the rear part of the base A10. Wash it in warm
water using aneutral kitchen detergent and then rinse it under acurrent of clean warm water. Wipe it
dry and put it back in its place.
The grill plates A4 and A6 and the removable drip tray A8 can also be washed in adishwasher (in the
upper rack).
Attention:
Before attaching the grill plates A4 and A6 to the grill, make sure that they
are completely dry.
Do not rinse the grill or its power cord under running water or submerge it in water or any in other liquid.
Prior to first use, it is important to turn on the grill and run it at maximum temperature for 5-10 minutes
without any food. During this time a small amount of smoke may be emitted. This is a normal event
during which the protective layer on the heating elements is burnt off.
Note:
During the first couple of uses, the plates may temporarily change their colour tone.
USING THE CONTACT GRILL
Check that the removable drip tray A8 is correctly seated in the base A10 and that both the grill plates
A4 and A6 are properly installed in place. We recommend smearing the grill plates A4 and A6 with
asmall amount of cooking oil.
Unwind the full length of the power cord and connect it to apower socket. The connection of the appliance
to apower socket is indicated by asound and the control panel A7 lighting up briefly.
AUTOMATIC GRILLING MODE
In this mode, the grill can only be used with the top grill plate A4 tilted down.
Check that the top grill plate A4 is titled down and then press button B1 to put the grill into the stand-by
mode. LED indicators B4B6 gradually light up and turn off.
Press one of the buttons B3 to select asuitable food category. The respective button B3 will be lit and
at the same time all the LED indicators will start flashing.
To confirm the settings, press the button B7. LED indicators B5 andB6 will turn off. LED indicator B4 will
start flashing and the grill plate preheating phase will start.
Note:
If no settings are made or they are not confirmed, the grill will automatically turn itself
off after 10 minutes.
When first turned on, there may be light smoke emitted. This is acompletely normal event.
The preheating phase takes several minutes and its completion is indicated by asound. Now the grill is
ready for grilling. This is signalled by LED indicator B4 being lit and LED indicator B5 flashing.
Using the handle A2, fully tilt open the top grill plate A4 to the vertical position. It is necessary to tilt open
the top grill plate all the way so that the subsequent food thickness detection phase can be correctly
performed. Place the food that you wish to grill on to the bottom grill plate A6, and tilt the top grill plate
A4 down using the handle A2. When inserting food, opening and closing the grill, be especially careful
not to burn yourself on the hot surface of the appliance.
Attention:
When the grill is not opened for the purpose of inserting food or when it is not
locked after food is placed on the grill plate A6, asound will be made after afew
minutes as areminder that food needs to be placed in the grill or the top grill
plate A4 needs to be tilted down. If you do not do so, the grill will turn itself off
automatically after several minutes. This is indicated by asound.
When the top grill plate A4 is tilted down, the grill automatically detects the thickness of the food within
3 seconds and starts the automatic grilling mode. LED indicators B4 andB5 are lit andLED indicator
B6 (RARE) is flashing. The grilling time and temperature are adjusted for the selected category and
measured food thickness.
To achieve the best results, it is recommended not to open the grill frequently during the food cooking
phase. The status of the food is indicated by the respective LED indicator B6. Cooking to acertain doneness
level is indicated by the flashing LED indicator B6. When agiven doneness level is reached, this is indicated
by asound and the respective LED indicator B6 being lit. The achievement of the rare doneness level
is indicated by the “RARE” LED indicator being lit. The achievement of the medium doneness level is
indicated by the “RARE” and “MEDIUM” LED indicators being lit, and the achievement of the well done
doneness level is indicated by the “RARE”, “MEDIUM” and “WELL DONE” LED indicators being lit. The
resulting doneness level may differ depending on the quality and type of food.
When the desired result is achieved, remove the food from the grill. You may prepare meals with varying
levels of doneness in asingle batch. Always after removing apart of the food, do not forget to close
the grill so that the cooking phase for the remaining food can finish correctly. The grill must not be left
without supervision while it is in operation. When the highest level of doneness is achieved, asound is
made and the grill turns off automatically. When you remove all the food from the grill before it turns off
automatically and you will no longer be using it, turn it off manually by pressing button B1.
If you wish to cook more meals, first make sure that the grill plate A6 is completely empty and close the
grill. Then turn the grill on again and follow the procedure described in the previous instructions. Residual
heat may result in the situation where upon repeated use the preheating phase may be shorter in duration.
In the automatic mode FROZEN FOOD, the thickness of the food is not detected. When the preheating
phase is complete, the grill immediately enters the food defrosting mode. When the food defrosting
phase is finished, the grill will automatically switch to the stand-by mode. In the event of inactivity, the
grill will automatically turn itself off after 10 minutes.
MANUAL GRILLING MODE
In the manual mode, the grill can be used with the top grill plate A4 tilted down, tilted open vertically
or flush with the bottom grill plate A6.
To turn on the grill, press button B1.
In the event that the top grill plate A4 is tilted down, LED indicators B4B6 will gradually light up and
turn off. To set the manual grilling mode, press button B2. LED indicators B5 andB6 will start flashing.
This signalises that the manual grilling mode is set.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SBG 6031 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info