Bedienungsanleitung Sencor SBL 4870 (Seite 3 von 7) (Englisch)

758835

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

11/2017

- 3 -

■

The appliance is equipped with athermal fuse protecting the motor from damage in case of overload. If the appliance

shuts off as aconsequence of the motor being overloaded, disconnect it from the power socket and allow it to cool

down for at least 30 minutes. Then you may continue using it.

■Do not turn on the appliance when it is empty. Incorrect use of the appliance may negatively affect its lifetime.

■If ingredients stick to the blade assembly or the inside walls of the blending jug, turn the appliance off and unplug it

from the power supply. Make sure that the blade assembly has stopped rotating. Carefully remove the blending jug

from the motor unit. Open the lid and, using aspatula, clean the blade assembly and the walls of the blending jug.

Properly close the lid and seat the blending jug back on to the motor unit. Plug the power cord into apower socket

and then you may continue blending.

■

When handling the blade assembly, be very careful not to injure yourself on its sharp cutting edge. This applies

especially when removing the blade assembly from the respective jug, when emptying the jug and when cleaning.

■The included jugs are not intended for heating food in amicrowave or for long-term food storage.

■Always turn off the appliance and disconnect it from the power socket when not be using it and when leaving it

without supervision, before changing accessories, before assembling, disassembling, cleaning and moving it.

■Check that the motor unit is turned off, disconnected from the power socket and that the rotating parts have come

to acomplete stop before removing the removable accessories from the motor unit.

■Clean it according to the instructions in chapter Cleaning and maintenance. Do not submerge the motor unit and its

power cord in water or any other liquid, or wash these parts under running water.

■

Ensure that the power plug contacts do not come into contact with moisture. Do not place heavy items on the power

cord. Make sure that the power cord does not hang over the edge of atable or that it is not touching ahot surface.

■

Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise,

this could damage the power cord or the socket.

■If the power cord is damaged, it must be replaced by an authorised service centre or by another similarly qualified

person, this will prevent the creation of adangerous situation. It is forbidden to use the appliance if it has adamaged

power cord.

■Do not use the appliance when it is not functioning properly or showing any signs of damage. In order to prevent

ahazardous situation arising, do not repair the appliance yourself or modify it in any way. Have all repairs performed

at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from

unsatisfactory performance or quality warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SBL 4870 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info