02/2017
- 5 -
Copyright © 2017, F
EN Blender
User'smanual
Prior to using this appliance, please r manual thoroughly
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual. Keep this user’
retrieved for future use
We rec
purchase receipt and responsibility statement of the v
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we rec
appliance in the original box from the manufacturer
DESCRIPTION OF
A1 Cap
A2 Lid with opening
opening is used for adding
ingredients
into the blending jar while
blending.
A3 The sealing ring of the lid
adheres to the lid.
A4 Blending jar with 1.5 l capacity
A5 Attachment collar
A6 Blade assembly
A7 Blade assembly sealing ring
A8 PULSE function
for brief blending at maximum
speed.
A9 ICE CRUSH function
for crushing ice.
A10 NUTRI SMART BLENDING function
for outstanding, energy
vegetable drinks.
A11 Speed control knob
for turning off the motor unit and
setting speeds.
A12 Motor unit
A13 Anti-slip feet
A14 Power cord stor
RELEASING
1. B1 ).
2.
release the blade (fig. B2 ).
3. B3 ).
BEFORE FIRST USE
1.
2. A1 , lid A2 with sealing ring A3 , blending jar A4 , attachment
collar A5 , blade assembly A6 and blade assembly sealing ring A7 ), which are
intended for contact with food, must be w
and a
and thoroughly wipe dry with afine wiping cloth or allow them to dry naturally.
Attention:
When cleaning the blade assembly
The blades are sharp.
ASSEMBLING AND DISASSEMBLING
Before you start assembling or disassembling the appliance, check that the
motor unit A12 is turned off and disconnected from the power socket and that
the rotating parts have come to acomplete stop
1.
1.1 A6 into the attachment collar A5 . On to the blade
assembly A6 place the sealing ring A7 , and ensure that it has properly
adhered along the entire perimeter of the blade assembly A6 .
1.2 A5 with the inserted blade assembly A6 and
sealing ring A7 against the blending jar A4 from underneath. Screw the
attachment collar A5 to the blending jar A4 and tighten firmly
1.3 A2 , place the cap A1 and turn it clockwise to secure it
in place. A4 ,
close it with the assembled lid.
along the entire perimeter so that it adheres well t
jar A4 .
1.4
2.
2.1 A12 on an even, dry surface, for example on a
countertop. Place the assembled blending jar on to the motA12 and
press it down to secure it to the motA12 . The assembled blending
jar can be seated on the motor unit A12 in two directions.
either right or left.
2.2 A4 .
OPERA
1. A11 is set to the OFF position and that the motor
unit A12 is disconnected from the power socket.
2. Assemble the blender according to the instructions in the chapter Assembling
and disassembling the appliance.
3. Place the food or pour the liquids that you wish to blend into the blending jar
A4. Firmly close the blending jar A4 using the lid accor
in chapter Assembling and disassembling the appliance.
Note:
The maximum capacity of the blending jar A4 is 1.5 l. W
recommend filling the blending jar with an amount of fluid great
1.2 l. Fluids that increase in v
smaller batches.
4. A11 to the
required speed level.
ingredients to mix together
always use your hand to hold down the lid A2 fr
appropriate when you wish to briefly blend ingr
start the pulse level, press button A8 and hold it down as long as you want to
blend at the highest speed. Once you release the buttA8 , the pulse function
automatically switches off
Note:
The pulse button A8 is functional even when the speed dial A11 is set
to OFF
Attention:
The maximum operating time is 2 minutes. Do not leav
in continuous operation for longer than indicated abo
the appliance to cool down for 2 minut
or liquids with a
continuous operation for longer than 1 minute
5. AfA1 , you can add fA4
while blending. A1 , turn it counter-clockwise and take it off.
The cap A1 can also be used as areceptacle for adding ingr
6. A6 or the w
blending jar A4 , turn the appliance off by turning the speed control knob A11
to the OFF position and disconnect it from the power socket. Make sure that
the blade assembly A6 has stopped rotating. Car
blending jar from the motor unit A12 . A2 , and using a
spatula, clean the blade assembly A6 and the sides of the blending jar A4 . Put
the lid A2 back on and reattach the blending jar to the motor unit A12 . Plug the
power cord into apo
7. A11 to
the OFF position and disconnect the power cord from the pow
that the blade assembly A6 has stopped rotating and take the blending jar off
the motor unit A12 . Use a
blending jar A4 .
8.
Assembling and disassembling the appliance, and clean it accor
instructions in chapter Cleaning and maintenance.
ADVICE AND
First cut food with afirm consistency such as fruit and vegetables into smaller
pieces measuring 2 to 3 cm and only then blend it.
First blend a
ingredients through the opening in the lid A2 while blending
will achieve better results than by adding all ingr
A4 at once.
If you need to blend food of a solid consistenc
recommend that you first blend the food with asmaller amount of the liquids.
Then gradually add the remaining liquids through the hole in the lid A2 while
blending. A2 from
above.
T
blade assembly A6 does not get jammed too often. Start the blender repeatedly
in short intervals.
Ice cubes must be processed immediately upon being remo
freezer
not be possible to blend them.
QUICK GUIDE
Ingredients Speed selection Recommended
blending time
Fruit, vegetables cut int 4–6 30 s
Baby food 4–5 40 s
Spreads, dressings, marinades 2–3 30 s
Smoothies and cocktails 5–6 40 s
Soups 3–4 30 s
Ice cubes ICE CRUSH button –
