758903
6
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
- 6 - 05/2020 Copyright © 2020, Fast ČR, a.s.
Heed the correct order for the addition of ingredients into the baking container A3, as described in chapter "Using the breadmaker". Yeast
must not come into contact with liquids prior to aprogram being started.
The delayed start function cannot be selected in the "JAM" and "BAKE" programs.
Note:
The timer can be set to amaximum time of 13hours.
KEEP WARM function
When the program is finished, the breadmaker will automatically switch to the KEEP WARM mode for 60 minutes. If you wish to take the
bread out of the breadmaker immediately after it has finished baking, cancel this function by pressing the START/STOP button B5.
This function is not available for the DOUGH and JAM programs.
Memory function
In the event of ashort power outage (up to 10minutes), the breadmaker will automatically restart in the set program without the need to
press the "START/STOP" button B5 once power is restored.
In the event that the power outage is longer than 10minutes, the paused program will not be automatically resumed. If, however, the rising
phase has not yet commenced, you may start the program from the beginning. If the rising phase has already commenced, it is necessary
to start again with new ingredients.
Warning messages on the display
1. If the text "HHH" appears on the display B1 accompanied by asound signal when the program is started, it means that the temperature
inside the breadmaker is too high. This may occur when you attempt to use the breadmaker immediately after baking aloaf. Open the
lid A2 and allow the breadmaker to cool down for 10 to 20minutes. Once it has cooled down, you may use the breadmaker again.
2.
If the text "LLL" appears on the display B1 accompanied by asound signal when the program is started, it means that the temperature inside the
breadmaker is too low. Open the lid A2 and place the breadmaker into room temperature. The recommended room temperature is 15°Cto 34°C.
3. If the texts "EE0" or "EE1" appear on the display B1, please contact an authorised service centre.
OVERVIEW OF THE PROGRAMS:
1 – BASIC (basic bread types)
This program consists of the kneading, rising and baking phases. It is used for baking standard types of bread from white wheat flour that
may be flavoured using various ingredients such as herbs, etc.
2 – FRENCH (French style bread)
This program consists of the kneading, rising and baking phases, whilst the rising phase is longer than on the basic program. It is used for
baking traditional French white bread with afluffy centre and crispy crust. We recommend consuming French style bread on the same
day that it is baked.
3 – WHOLE WHEAT (wholemeal bread)
This program consists of the kneading, rising and baking phases. It is used to bake bread from wholemeal flour. Wholemeal flour should form
at least one half of the amount of flour. Wholemeal bread is nutritionally more valuable than bread from plain bread flour since wholemeal
flour contains the whole grain, including the bran and kernel. Whole wheat bread has adark crust with adark bread centre.
Note:
We do not recommend using the delayed start function with this program. Otherwise, the bread quality may be negatively affected.
4 – QUICK (quick baking)
This program consists of the kneading, rising and baking phases. This is afaster alternative to program no. 1 – BASIC. Abread baked in this
way has aless fluffy centre than abread baked with the basic program no. 1.
5 – SWEET (sweet bread)
This program consists of the kneading, rising and baking phases. It is used for baking sweet bread with ahigher fat and sugar content, and
with the addition of dried fruit, nuts, chocolate flakes, candied orange peel, etc.
6 – ULTRA-FAST
Kneading, rising and baking bread as quickly as possible. Usually this bread is less fluffy than the bread baked using program no. 4 – QUICK.
7 – GLUTEN-FREE
This program consists of the kneading, rising and baking phases. Dough rises only in asingle phase and the baking time is longer due to
its higher moisture component.
8 – DOUGH
This program is used for mixing and kneading ingredients and allowing the dough to rise, e.g. for pizza, bread rolls, etc. It does not include
the baking phase.
9 – JAM
This program is used for making fruit marmalades and jams. Cook the marmalades and jams in smaller batches as they increase in volume
while being cooked. Jam is sticky and is very difficult to remove if it escapes out of the baking container.
10 – CAKE
This program consists of the kneading, rising and baking phases. It is used for baking cakes and sweet baked goods prepared from dough
containing baking powder or sodium bicarbonate.
11 – SANDWICH (toast bread)
This program consists of the kneading, rising and baking phases. It is used for baking afluffy toast bread with athin crust.
12 – BAKE
This program includes only the baking phase and makes your breadmaker into asmall oven. Buttons + and – can be used to set the baking
time in the range from 10 to 60 minutes. It is used for baking ready-made dough from the store or for additional baking of abread that has
just finished baking if you feel that its crust is too light.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SBR 0770 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info