759013

Sencor SCP 3601 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
- 5 - Copyright © 2020, Fast ČR, a.s. 03/2020
EN Single induction
cooktop TouchControl
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Air inlet (along the sides of the
appliance)
A2 Hotplate
A3 Fan and air outlet
(on the underside of the appliance)
A4 Control panel with display
A5 Anti-slip feet
DESCRIPTION OF THE CONTROL PANEL
B1 Power setting button
B2 Temperature setting button
B3 Minus (–) button
B4 Display – shows the hotplate power
level, set temperature, automatic
shut-off time or error message
codes. If the cooktop is in the stand-
by mode, the display will show
"OFF".
B5 Plus (+) button
B6 Timer button
B7 On/Off button
B8 Hot hotplate indicator light (is
lit when the temperature of the
hotplate is higher than 80°C)
B9 Power level indicator light
B10 Temperature indicator light
B11 Timer indicator light
BEFORE FIRST USE
■ Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
■ Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe
it dry.
INDUCTION AND SELECTING SUITABLE COOKWARE
■ Underneath the hotplate there is an induction coil that, when turned on, creates
avariable electromagnetic field. The induction current generated by this field starts
heating the bottom of the pot or pan that is placed on the hotplate. To ensure
proper operation, it is important that the cookware is ferromagnetic. This property
can be verified using asmall magnet placed against the bottom of the pot or pan.
If there is an attraction between the magnet and the bottom of the pot or pan then
the cookware is ferromagnetic and hence suitable for use on an induction hotplate.
This includes, for example, cast iron, steel, enamelled and stainless steel cookware
with aferromagnetic bottom.
■ We recommend that the base of the cookware is flat and straight. The minimum
diameter of the base is 12 cm, the maximum diameter may be up to 2 cm past the
edge of the hotplate. The induction hotplate automatically adapts to the size of the
used pot or pan.
■ If, on the other hand, there is no attraction between the magnet and the bottom of
the pot or pan then the cookware is not suitable for use on an induction hotplate.
As arule, this includes cookware made from copper, pure stainless steel, aluminium,
glass, wood, ceramics, stone, etc.
Note:
When unsuitable cookware is used or if the hotplate detects that there
is no cookware on it, then it will turn off automatically. This is anormal
safety feature that prevents damaging the appliance.
RADIO WAVE INTERFERENCE
■ The use of the induction cooktop may cause interference to your radio, television
or similar receivers.
If this occurs, we recommend to:
■ redirect the radio or television antenna;
■ move the cooktop farther away from the radio, television or receiver;
■ insert the power plug into adifferent power socket with an independent circuit.
OPERATING THE APPLIANCE
■ Place the appliance on akitchen countertop or on atable within reach of apower
socket. At the same time, make sure that all safety instructions are followed.
■ Make sure that there are no foreign objects located on the hotplate A2 and that
its surface is clean.
■ Fully unwind the power cord and connect it to apower socket.
Note:
Since the appliance heats up during operation, the power cord must
be located in such a way that it is not touching the surface of the
appliance.
Note:
Plug the appliance into aseparate power socket with an independent
circuit breaker. Necessary circuit breaker – 16A.
Turning on the cooktop
To turn on the cooktop, press button B7. The display B4 will show "ON".
Place apot or pan on the hotplate A2.
Press button B1. The appliance automatically detects the pot or pan. If the used
cookware is suitable, the appliance will start automatically at the preset power level.
The display B4 will show the preset power value and the fan A3 will start.
If the used cookware is not suitable, the appliance will not start. The error message E0
will appear on the display B4 and the appliance will beep. After awhile the appliance
will automatically switch to the stand-by mode.
If you take the cookware off the hotplate A2, the display B4 will show the error
message E0 and the appliance will beep. After awhile the appliance will automatically
switch to the stand-by mode.
Turning off the cooktop
When not using the cooktop, press button B7 to turn the cooktop off. The display B4
will show "OFF". The cooktop will switch to the stand-by mode. Disconnect the power
plug from the power socket.
Note:
The fan A3 will run for acertain time after the cooktop is turned off so
that it cools down faster. Do not pull the power plug out of the power
socked until the fan A3 turns off completely.
Note:
When first turned on, there may be light smoke emitted. This is an
entirely normal event, which will disappear after afew minutes.
Setting the power level
When the cooktop is turned on for the first time, it will start at the preset power level.
Press button B1 and indicator light B9 will be lit.
To set the power level use buttons - B3 or + B5. The power level can be set in the range
100 W- 2,000 W.
Setting the temperature
When the cooktop is turned on for the first time, the preset temperature is set to
"120°C".
Press button B2 and indicator light B10 will be lit.
To set the temperature, use buttons - B3 or + B5. You can set the temperature in the
range from 60 to 240°C.
Setting the power level and automatic shut-off
Press button B1 and indicator light B9 will be lit. Then press the timer button B6. The
display B4 will show "00:00". Using buttons - B3 or + B5, set the time after which
the cooktop will automatically turn off, in the interval from 1 minute to 3 hours. The
automatic shut-off is set in one-minute increments.
The set automatic shut-off time will start flashing on the display B4 for approximately
5 seconds and then the appliance will automatically switch to the power level setting.
The default power will appear on the display B4. To set the power level use buttons
- B3 or + B5.
The set time will start counting down on the display B4.
During the set time, you can change the set power level using buttons - B3 or + B5.
When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode.
Setting the temperature and automatic shut-off
Press button B2 and indicator light B10 will be lit. Then press the timer button B6.
The display B4 will show "00:00". Using buttons - B3 or + B5, set the time after which
the cooktop will automatically turn off, in the interval from 1 minute to 3 hours. The
automatic shut-off is set in one-minute increments.
The set automatic shut-off time will start flashing on the display B4 for approximately
5 seconds and then the appliance will automatically switch to the temperature setting.
"120°C" will appear on the display B4. To set the temperature, use buttons - B3 or + B5.
The set time will start counting down on the display B4. The countdown time and the
set temperature will be intermittently shown on the display B4.
During the set time, you can change the set temperature using buttons - B3 or + B5.
When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode. The display B4 will show "OFF".
Overheating protection
■ The appliance is equipped with overheating protection. In the event that there
is arisk of it overheating (you placed an empty pot or pan on the hotplate), the
appliance will beep and turn off automatically.
Note:
For safety reasons, the cooktop will turn off automatically after two
hours of operation if you do not press any button or adjust the settings.
CLEANING AND MAINTENANCE
■ Clean the appliance after every use. Makes sure that dried on food or other residues
do not accumulate on it. Before cleaning it, always turn off the appliance using the
On/Off button B7, disconnect the power cord from the power socket and allow the
appliance to cool down completely.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SCP 3601 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info