759016
6
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
- 6 - 03/2020
Copyright © 2020, Fast ČR, a.s.
To activate the child lock function, hold down button B4 for awhile. Indicator light
B6 will be lit and the control buttons will be disabled.
To deactivate the child lock function, hold down button B4 for awhile. The indicator
light B6 will turn off.
Overheating protection
The appliance is equipped with overheating protection. In the event that there
is arisk of it overheating (you placed an empty pot or pan on the hotplate), the
appliance will beep and turn off automatically.
Note:
For safety reasons, the cooktop will turn off automatically after two
hours of operation if you do not press any button or adjust the settings.
CLEANING AND MAINTENANCE
Clean the appliance after every use. Makes sure that dried on food or other residues
do not accumulate on it. Before cleaning it, always turn off the appliance using the
On/Off button B9, disconnect the power cord from the power socket and allow the
appliance to cool down completely.
To clean the hotplate A2 and the surface around it, use asoft, lightly dampened
textile. Then wipe the hotplate A2 dry. In the event of greater soiling, use asmall
amount of neutral kitchen detergent. Remove any remaining detergent using
aclean, lightly dampened cloth. Then thoroughly wipe the cleaned surface until dry.
Do not use steel wool, solvents, cleaning products with an abrasive effect, etc. to
clean the appliance. Otherwise the surface coat of the appliance may be damaged.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
Storage
When not using the appliance for an extended period of time, disconnect the power
plug from the power socket, allow the appliance to cool down and clean it according
to the instructions provided above. Before storing it, check that the appliance is
clean and dry. Store the appliance in adry, clean and well-ventilated location not
exposed to extreme temperatures and out of children'sreach.
Error messages
Error code Cause Solution
E0 There is no pot or
pan on the hotplate
A2, or you placed
unsuitable cookware
on it.
Use suitable cookware – more in section
"Induction and selecting suitable
cookware".
E1 or E2 Heat sensor error. Stop using the appliance, disconnect the
power plug from the power socket and
contact an authorised service centre.
E3 or E4 The voltage in the
power socket to
which the cooktop
is connected is too
high or too low.
Insert the power plug into apower socket
with avoltage of 220 – 240 V~.
E5 Overheating Allow the cooktop to cool down. Then put it
into operation again.
E6 The heat fuse was
activated, the
cooktop turned off
due to overheating.
Allow the cooktop to cool down. Check that
the air inlet A1 and the fan and the air outlet
A3 are free and unobstructed. If the problem
persists, stop using the appliance, disconnect
the power plug from the power socket and
contact an authorised service centre
Note:
If the problem persists, stop using the appliance, disconnect the power
plug from the power socket and contact an authorised service centre.
TECHNICAL SPECIFICATIONS
Rated voltage range ....................................................................................................... 220 – 240 V~
Rated frequency......................................................................................................................50 / 60 Hz
Rated power input .................................................................................................................... 3,500 W
Hotplate power level setting .......................................................... max. 2,000 W(left hotplate)
max. 1,500 W(right hotplate)
Hotplate temperature settings ......................................................................................60 – 240°C
Operating time settings ..........................................................................................1 – 180 minutes
Safety class for electrical shock protection: Class II – Electrical shock
protection is provided by double or heavy-duty insulation.
We reserve the right to change text and technical specifications.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
these products over to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your products to the local retailer when buying an equivalent
new product.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SCP 4201 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info