Bedienungsanleitung Sencor SES 4900SS (Seite 6 von 9) (Englisch)

758392

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

EN Espresso machine

User'smanual

■ Prior to using this appliance, please read the user‘smanual thoroughly,

even in cases, when one has already familiarised themselves with

previous use of similar types of appliances. Only use the appliance in

the manner described in this user’smanual. Keep this user‘smanual in

asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging

material, purchase receipt and responsibility statement of the vendor

or warranty card for at least the duration of the legal liability for

unsatisfactory performance or quality. In the event of transportation,

we recommend that you pack the appliance in the original box from

the manufacturer.

DESCRIPTION OF THE ESPRESSO MACHINE

A1 Control panel

A2 Cup warming surface

A3 Storage compartment cover

A4 Water tank lid

A5 Water tank

A6 Control knob

– turn off the function

– dispense steam / hot

water

A7 Steam nozzle with swivel

hot milk (HOT MILK) and

cappuccino (CAPPUCCINO)

dispensing mechanism

A8 Drip tray

A9 Drip tray grate

A10 Full drip tray indicator

A11 Portafilter

A12 Brew head

A13 Empty water tank indicator

light

A14 Descaling indicator light

A15 Water filter

A16 Coffee measuring cup with

tamper

Accessories (not shown)

Basket for brewing one cup of coffee

Basket for brewing two cups of coffee

Water filter

Cleaning tool

DESCRIPTION OF THE CONTROL BUTTONS

B1 On/Off button

B2 One-cup brew button

B2 Two-cup brew button

B4 Steam dispensing button

BEFORE FIRST USE

■ Remove all packaging materials from the appliance and remove any

protective film, promotional tags or labels.

■ Install the appliance on an even, dry and clean surface. Take out the

water tank A5, remove the lid A4, rinse it out with clean water with

the addition of a small amount of neutral dishwashing detergent.

Then rinse it out thoroughly using clean water, dry it and put it back

in its place.

■ Remove the drip tray A8 together with the grate A9. Wash using

clean water with the addition of asmall amount of neutral kitchen

detergent. Then rinse it out thoroughly using clean water, dry it and

put it back in its place.

■ Wipe the outer surface of the appliance with alightly dampened cloth

and then wipe it thoroughly dry.

■ To ensure the optimal lifetime of the appliance, it is necessary to allow

its internal components to be rinsed out several times with hot water

prior to first use. For this purpose, use button B2 or B3, as

described in chapter „Rinsing out the espresso machine“.

INSTALLING THE WATER FILTER

■ Remove the water filter from the plastic bag.

C1: Submerge the water filter in cold water for 5 minutes. Then take it

out of the water.

C2: Take out the water tank. Attach the filter and push on the adapter

located at the bottom of the water tank so that it touches the

bottom.

C3: Fill the water tank with clean cold water and insert it back. Check

that the water tank is correctly installed.

■ It is recommended to replace the filter every 2 months.

WATER HARDNESS SETTINGS

■ It is necessary to set the correct water hardness before using the

espresso machine. You can find out your water hardness from your

water utility company.

■ Check that the espresso machine is turned off and the power cord

plug is connected to a power socket.

■ Simultaneously hold down B1 , B2 and B3 for 5 seconds.

The button of the previously set water hardness will start flashing.

■ Press the button corresponding to your water hardness – see table

below. The espresso machine will turn off and is ready for use.

Button Water hardness Amount of water for

descaling

1 cup low up to

50mg/l every 20 litres

2 cups medium 50–350mg/l every 12 litres

Steam high higher than

350mg/l every 6 litres

Note:

The water that you pour into the water tank A5 should

ideally be at room temperature (approximately 25 °C).

Water that is too cold, could negatively affect the final taste

of the coffee beverage.

Attention:

Always fill up to the maximum mark. Never overfill the

water tank A5. Never fill the water tank A5 with warm

or hot water, sparkling water or other liquids such as,

for example, milk. This could damage the appliance.

■ Do not leave water in the water tank A5 for longer than one day. For

brewing quality fresh coffee, it is necessary to always use fresh water.

Otherwise, the flavour of the resulting beverage may be negatively

affected.

■ When the indicator light A13 is lit, it is necessary to refill the water

tank with water. Remove the lid A4 and pour cold water into the water

tank A5.

Attention:

When pouring water into the water tank A5, be very

careful not to pour it on to the espresso machine or

the power cord. Always fill up to the maximum mark.

TURNING ON THE ESPRESSO MACHINE

Make sure that the espresso machine is installed on an even, dry and

clean surface, that the water tank A5 is full and that the drip tray A8

with the grate A9 is installed. Make sure that the drip tray A8 is empty.

Unwind the power cord and insert the power plug into apower socket.

Press button B1 to turn on the espresso machine. Button B1 will

start flashing, which means that the espresso machine is heating up to

operating temperature.

When button B1 stops flashing, the espresso machine is ready for use.

Note:

Button B1 may flash during operation, this is normal,

since it indicates that the espresso machine is heating up

to operating temperature. It will not be possible to press

any other button while button B1 is flashing. Wait until

button B1 stops flashing.

TURNING OFF THE ESPRESSO MACHINE

■ When you have finished using it, turn off the espresso machine

by pressing button B1 and disconnect the power cord from the

power socket. Allow the espresso machine to cool down and clean it

according to the instructions in chapter „Cleaning and maintenance“.

RINSING OUT THE ESPRESSO MACHINE

■ Turn on the espresso machine and wait until it heats up to operating

temperature.

■ Place abowl (at least 100 ml in capacity) underneath the brew head

A11.

Sencor SES 4900SS Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info