Bedienungsanleitung Sencor SFH 7015 (Seite 5 von 6) (Englisch)

759938

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

- 5 - 08/2019

EN Hot Air Fan Heater

User'smanual

■ Prior to using this appliance, please read the user’smanual

thoroughly, even in cases where you have previously

familiarised yourself with the operation of similar types of

appliances. Only use the appliance in the manner described

in this user’smanual. Keep this user’smanual in asafe place

where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box,

packaging material, purchase receipt and responsibility

statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance

or quality. In the event of transportation, we recommend

that you pack the appliance in the original box from the

manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Power indicator light

A2 Temperature control knob

A3 Turn switch for starting

just the fan,

for setting the power

level Ior II

and for turning off the

appliance.

A4 Air outlet grill

A5 Fan and heating elements

These parts are hidden

underneath the grill.

A6 Integrated carry handle

(not shown)

it is located at the rear of

the appliance.

A7 Air inlet grill

(not shown)

it is located at the rear of

the appliance.

A8 Oscillation toggle switch

OPERATING THE APPLIANCE

■ Before first use, remove all packaging materials including

promotional stickers and labels from the appliance.

■ Locate the appliance in a suitable location in accordance

with the safety instructions. Make sure that the inflow or

outflow vents A7 or A4 are not blocked, that the temperature

control knob A2 is set to minimum and the switch A3 is in

position 0 (off). Connect the appliance to a power socket.

After connecting the appliance to apower socket, indicator

light A1 will be lit.

1. SETTING AN OPERATING MODE

■ Set the temperature control knob A2 to maximum and select

the desired operating mode using switch A3.

Setting switch A3 Description of operating mode

0O

Air ventilation without heating.

Only the fan is running. Heating

elements are turned o.

Power is set to alow level (1 000 W).

The fan and one of the two heating

elements are running.

The heating element heats the air

and the fan ensures its ow into

the room.

Power is set to ahigh level (2 000

W). The fan and both the heating

elements are running. The heating

elements heat the air and the fan

ensures its ow into the room.

Note:

Upon first use or after it has not been used for an extended period of time, aslight odour may be sensed from the appliance.

This is completely normal and will quickly disappear.

2. TEMPERATURE CONTROL KNOB SETTING

■ The appliance is equipped with athermostat that serves to

maintain the desired temperature in the room.

■ To heat up the air in the room as fast as possible, set switch

A3 to the high power level and the temperature control

knob A2 to maximum. When the desired temperature has

been reached, slowly turn the temperature control knob A2

anticlockwise until you hear aclick. The set thermostat will

automatically switch the fan and heating elements A5 on

and off to maintain the desired temperature.

3. OSCILLATION FUNCTION

■ Setting the switch A8 to position Iwill turn on the oscillation

function. The hot air fan heater will automatically turn

from side to side. To turn off oscillation, set the switch A8

to position 0. This function is only available on model SFH

7055WH.

4. TURNING OFF

■ When you have finished using it, turn off the oscillation

function (only on model SFH 7055WH), set the temperature

control knob A2 to minimum, set switch A3 to position 0

(off) and disconnect the power cord from the power socket.

After disconnecting the appliance from the power socket,

indicator light A1 will turn off. Allow the appliance to cool

down.

AUTOMATIC SHUT-OFF FUNCTION

■ The appliance is equipped with a safety mechanism that

automatically turns it off when it is accidentally knocked

over. After returning the appliance back to the operating

position, it will start running again.

THERMAL PROTECTION

■ The appliance is equipped with athermal fuse that turns it

off upon overheating. Should such a situation occur, turn

the appliance off and disconnect it from the power socket.

Make sure that the air inlet and outlet openings A7 or A4

are not blocked. Allow the appliance to cool down before

attempting to put it back into operation as this will give the

thermal fuse time to reset.

■ If you are unable to put the appliance back into operation,

contact an authorised service centre.

CLEANING AND MAINTENANCE

■ Before cleaning it, make sure that the appliance is turned off

and disconnected from the power socket. If the surface of

the appliance is hot, allow it to cool down.

■ Use a dry or lightly dampened wiping cloth to clean the

surface of the appliance. Then thoroughly wipe everything

dry. Dust that has settled inside the appliance can be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SFH 7015 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info