759907
6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
- 6 - 09/2020 Copyright © 2020, Fast ČR, a.s.
EN Pedestal fan
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in the manner described in this user’smanual. Keep this user'smanual
in asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or
warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE FAN
A1 Front cover
A2 Fan blades
A3 Aluminium fan pole
A4 Control panel
A5 Base unit
A6 Rear cover
A7 Motor unit
A8 Power adapter connection socket
A9 Power adapter
DESCRIPTION OF THE CONTROL PANEL
B1 Display
B2 Vertical oscillation button
B3 Operating mode selection button
B4 Decrease fan speed button
B5 On/Off button
B6 Increase fan speed button
B7 Automatic shut-off timer setting button
B8 Horizontal oscillation button
DESCRIPTION OF THE REMOTE CONTROL
C1 On/Off button (ON / OFF)
C2 Decrease fan speed button (SPEED)
C3 Operating mode selection button (MODE)
C4 Vertical oscillation button (OSC)
C5 Increase fan speed button (SPEED)
C6 Automatic shut-off timer setting button (TIMER)
C7 Horizontal oscillation button (OSC)
Note:
The fan is supplied assembled.
USING THE FAN
Place the fan on ahorizontal, stable, dry and smooth surface within reach of apower socket.
Insert the end of the power adapter A9 into the socket A8 and insert the power adapter into aproperly grounded power socket. The fan
will beep and all the indicator lights will turn on for ashort moment. Then the fan will automatically switch to the stand-by mode and the
room temperature will be shown on the display B1.
Turning the fan on and off
While the fan is in stand-by mode, press button and the fan will start. "1" will appear on the display B1. Then the value "1" will stabilise
and you can make personal fan settings.
When not using the fan any more, press button and the fan will switch to the stand-by mode. Wait until the fan blades A2 stop
turning and then disconnect the power plug from the power socket.
Speed setting
Buttons and serve to set the air flow speed. Button increases the speed and button decreases it. The speed can
be selected in the sequence: 1 – 12. The selected speed will flash on the display B1 for afew moments and when the value stabilises, the
fan will start running at the selected speed.
Selecting an operating mode
To select an operating mode, use button . Repeatedly press button to select the desired mode: "Natural", "Smart" or "Normal".
When the operating mode "Smart" or "Natural" is selected, the indicator light above the selected operating mode will be lit. When no
indicator light is lit, the "Normal" operating mode is selected.
Operating mode "Natural" – in this operating mode the speed automatically changes from low to high and back in short time intervals.
Operating mode "Smart" – in this operating mode the fan speed is set automatically depending on the temperature in the room.
If the temperature in the room is ≥ 35°C, the fan will automatically switch between speeds 10 – 11 – 12 in 15-second intervals.
If the temperature in the room is in the range from 29°Cto 34°C, the fan will automatically switch between speeds 7 – 8 – 9 in 15-second
intervals.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SFN 2540 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info