Bedienungsanleitung Sencor SFN 4031 (Seite 5 von 6) (Englisch)

759899

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

06/2017

EN Pedestal Fan

User'smanual

■ Prior to using this appliance, please read the user’s manual

thoroughly, even in cases, when one has already familiarised

themselves with previous use of similar types of appliances. Only

use the appliance in the manner described in this user’smanual.

Keep this user’s manual in a safe place where it can be easily

retrieved for future use.

■ We recommend saving the original cardboard box, packaging

material, purchase receipt and responsibility statement of the

vendor or warranty card for at least the duration of the legal

liability for unsatisfactory performance or quality. In the event of

transportation, we recommend that you pack the appliance in the

original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Horizontal oscillation toggle switch

A2 Motor unit with adjustable vertical tilt angle

A3 Panel with control buttons

0 – o, 1 – low speed, 2 – medium speed, 3 – high speed

A4 Screw for fastening the control panel to the extensible pole

A5 Inner extensible pole

A6 Inner extension lock

A7 Outer pole

A8 Cross base central connecting piece

A9 Cross base feet

A10 Buttery screw with washer

Serves to fasten the outer pole to the base.

A11 Motor unit shaft

A12 Rear protective grill with fastening clamps and acarry handle

A13 Rear protective grill fastening nut

A14 Fan blades with adiameter of 40 cm

A15 Fan blade fastening nut

A16 Front protective grill

Note:

The accessories include a screw and a nut for joining the

protective grills.

BEFORE FIRST USE

■ Take the appliance and its accessories out of the packaging

materials. Before disposing of the packaging materials, make sure

that no part of the appliance is missing.

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

■ Before assembling or disassembling the appliance, make sure that

it is turned o and disconnected from the power socket.

■ Secure the feet A9 in the cross base central connecting piece A8.

Fit the outer pole A7 from above into the cross base connecting

piece A8 and fasten from underneath using the buttery screw

A10 (see g. B).

■ Use one hand to rmly hold the outer pole A7 and the other hand

to release the inner extension lock A6 by turning the locking

screw anticlockwise. Slide the inner pole A5 out all the way and

secure it rmly by tightening the locking screw clockwise.

■ Use a cross-head screwdriver to loosen screw A4. On to the

inner pole A5, slide the control panel A3 and secure it rmly by

tightening the screw A4.

■ Place the base with the attached control panel A3 on aclean,

even, stable and smooth surface. Place the rear protective grill

A12 against the front side of the motor unit A2 so that the shaft

A11 passes through the centre of the grill A12, so that the tabs

on the front side of the motor unit A2 t into the holes in the

central part of the rear grill A12 and so that the handle is above

the motor unit A2. Screw the nut A13 clockwise to secure the rear

protective grill A12 to the motor unit A2. Before tightening the

nut A13, make sure that the rear grill A12 has not moved and that

the alignment tabs are still in the holes.

■ On to the shaft of the motor unit A11 put on the fan blades A14

so that the shaft A11 properly slides into the centre part of the fan

blades A14. Push the fan blades A14 towards the motor unit A2

all the way. Now, check that the fan blades A14 turn freely, and

secure them in place by screwing nut A15 anticlockwise on to the

shaft A11.

■ Release the clamps along the perimeter of the rear protective

grill A12. Place the front protective grill A16 against the rear

protective grill A12 so that the front grill A16 ts into the

alignment hook in the bottom part of the rear protective grill A12

and so that the screw holes in the top part of the grills are aligned.

Fasten the released clamps along the perimeter of the grills. To

ensure astrong connection of the two grills, into the aligned holes

at the top of the grills it is necessary to screw in the supplied screw

and secure it with the nut.

■ Before putting the fan into operation, check that it is correctly

assembled and that the protective grills are rmly joined.

■ To disassemble, proceed in reverse sequence.

OPERATING THE APPLIANCE

Setting the speed and turning o the fan

■ Place the fan on an even, dry and smooth surface within reach of

apower socket. Connect the power cord to apower socket. To set

the air ow speed, use the buttons on the control panel A3. The

functions of the control buttons are described below:

0 – turn o the fan;

1– set alow air ow speed;

2 – set amedium air ow speed;

3– set ahigh air ow speed.

■ When you have nished using the fan, always turn it o and

disconnect it from the power socket.

Setting horizontal oscillation

■ The horizontal oscillation of the motor unit A1 can be set using

the toggle switch A2. To start the horizontal oscillation, push the

toggle switch A1 down. The motor unit A2 will oscillate from side

to side at an angle of approximately 90°.

■ To turn o the oscillation, pull the toggle switch A1 up. This will

turn o the oscillation.

Setting the vertical tilt angle of the motor unit

■ Before setting the vertical tilt angle of the motor unit A2, rst turn

o the fan. Set the desired angle of the motor unit A2 and then

you may start the fan again.

Note:

The motor unit A2 may only be tilted up and down in

alimited range. Do not set the tilt angle of the motor unit

A2 by force.

Setting the height of the fan

■ The height of the fan may be set in the range from 102 to 120 cm.

■ Turn o the fan before setting its height. Use one hand to rmly

hold the outer pole A7 and the other hand to release the inner

extension lock A6 by turning the locking screw anticlockwise.

Slide the inner extensible pole A5 in or out to set the desired fan

height. To lock the set height in place, tighten the locking screw

clockwise.

Sencor SFN 4031 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SFN 4031

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info