Bedienungsanleitung Sencor SMG 4200 (Seite 8 von 8) (Englisch)

758400

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

- 8 - 06/2020

TROUBLESHOOTING

MALFUNCTION POSSIBLE CAUSE REMEDY

The motor unit is

running but the

screw shaft is not

turning.

The safety clutch is

broken.

Disassemble the grinding attachment

and thoroughly clean away any

fragments of the clutch from all its

parts. Slide anew safety clutch on to the

screw shaft.

Faulty clutch or

motor.

Contact the supplier or professional

service centre.

The motor unit is

running irregularly,

its speed is

fluctuating.

Large amount of

food is inserted or

you are pushing

down too hard on

the pusher.

Insert the food more slowly and push

gently on the pusher.

The motor unit

stops during

operation and

cannot be started.

The motor

overheated and its

overload protection

automatically shut

it off.

Turn off the meat grinder, disconnect it

from the power socket and allow it to

cool down sufficiently.

Motor malfunction. Contact the supplier or professional

service centre.

Food is not

sufficiently

defrosted.

The cross blade

is installed in the

wrong direction.

Disassemble the grinding attachment

and check the position of the cross

blade.

The cross blade is

blunt.

Have the blade professionally sharpened

or replace it with anew one.

The grinding

chamber clogs up

constantly.

The food being

ground is too big. Cut the food into smaller pieces.

The feed tube is

overfilled. Clean out the feed tube.

You are inserting

food too quickly

into the feed tube

or pushing down

too hard on the

pusher.

Insert the food more slowly and push

gently on the pusher.

It is possible that

abone fragment or

another similar item

is jammed in the

grinding chamber.

Disassemble the grinding attachment

and clean it out thoroughly.

The grinder cannot

be turned on, the

motor unit does not

start rotating.

Unless there is

apower outage,

evidently the main

power switch or

power cord is

faulty.

Contact the supplier or professional

service centre.

CLEANING AND MAINTENANCE

Tip:

Remains of unground meat may remain in the grinding chamber

that are hard to clean away. To make their removal easier, you can

grind a piece of bread or bread roll. We recommend disassembling

the grinding attachment in akitchen sink or alarger bowl to prevent

potentially soiling the work surface.

■ Before cleaning, the appliance must be turned off and disconnected from the power

socket. Never clean the grinder or its parts when it is turned on and running.

■ If the grinder is used for an extended period of time, it is possible that unit may be

hot to touch. Allow it to cool down before cleaning it.

■ Disassemble the attachment into its individual parts. Clean away any food remains,

wash in warm water with dish washing detergent and rinse under clean running

water. Then allow them to dry naturally or dry them out thoroughly using awiping

cloth. Do not use abrasive cleaning products.

■ No part of the grinding attachment is suitable for washing in adishwasher.

Attention:

When cleaning the cross blade A8, be very careful not to injure

yourself on its sharp cutting edges.

■ If food remains are left on some parts of the grinding attachment, we recommend

soaking these parts in warm water with asmall amount of kitchen detergent, and to

leave them to soak for acertain time, e.g. overnight. The soaking time depends on

how soiled the accessories are.

■ To clean the outer surface of the motor unit base A1, use acloth lightly dipped in

aweak detergent solution. After applying the detergent solution, wipe the surface

with acloth lightly dampened in clean water and then wipe dry. Do not use solvents,

abrasive cleaning products, etc. for cleaning the appliance. Otherwise the surface

coat of the appliance may be damaged.

Attention:

Never submerge the motor unit base A1 or the power cord in

water or in any other liquid.

STORAGE

■ When you have finished using the appliance, place it and its accessories in aclean,

dry place out of children‘sreach. Keep the stored appliance and its accessories away

from extreme temperatures, direct sunlight and excessive humidity and do not store

it in an overly dusty environment.

TECHNICAL SPECIFICATIONS

Rated voltage range ............................................................................................................ 220−240 V

Rated frequency.......................................................................................................................50–60 Hz

Rated power input ........................................................................................................................ 160 W

Maximum power input................................................................................................................500 W

Grinding capacity ....................................................................................................................... 30 kg/h

Maximum non-stop operating time ......................................................................................15 min

Electrical shock protection class ........................................................................................................ II

Weight ................................................................................................................................................3.5 kg

Noise level ................................................................................................................................ ≤82 dB(A)

EXPLANATION OF TECHNICAL TERMINOLOGY

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or

heavy-duty insulation.

Amendments to text and technical parameters are reserved.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling hand over

these appliances to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance.

Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human health, which

could result from improper waste disposal. Ask your local authorities or collection

facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

Sencor SMG 4200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info