- 11 - 11/2020
Copyright © 2020, F
Slide the dust container out of the water tank.
Attach the mop fabric to the underside of the water tank using the velcro zip E4
on the water tank.
Open the cap E5 and fill the tank with water
any excess wat
E6 are dry.
Note:
For wiping, w cleaning
agent, it may foam up and thereby w
on to the fabric, or potentially cause smudges on the floor after it dries.
Insert the dust container back into the water tank and insert this assembly back into
the vacuum cleaner
Start the vacuum cleaner.
SCHEDULED CLEANING
Note:
The scheduled cleaning time setting is based on the system time set on
the remote control.
time, it is necessary to correctly set the system time as described in
chapter SET
This function enables scheduling the vacuum cleaner to automatically start cleaning
at a
a
the application.
This function behaves as a delayed start, so you are actually setting a delayed
cleaning time. Example: If the current time on the vacuum cleaner is 5:00 p.m.
then by setting the scheduled cleaning time to 2:30 the vacuum cleaner will
automatically start cleaning only at 7:30 p.m. If you leave the main switch of the
vacuum cleaner turned on, then the same cleaning process will be repeated at 7:30
p.m. every day thereafter
Attention:
Never use the delayed cleaning function for wet wiping when
the water tank is filled with water
wetting of the floor in the vicinity of the charging station.
Setting scheduled cleaning:
In the stand-by mode or in the charging in the charging station mode, hold do
button C3 (PLAN) until the time setting value starts flashing on the display C2 .
Using buttons C5 ( ) or C8 ( ) set the time values. T
using buttons C6 ( ) or C7 ( ).
Confirm the set time by pressing button C9 (ON/OFF).
control must be pointed at the vacuum cleaner
scheduling via a voice message SCHEDULING CONFIRMED
Cancelling scheduled cleaning using the remote con
Following the pr
the display to 00:00 and confirm the value by pressing button C9 (
confirming, the remote contr
cleaner will confirm the scheduling via a voice message NO SCHEDULING.
The scheduled cleaning can also be cancelled via the smartphone application.
CONTROLLING
MOBILE APPLICA
The vacuum cleaner can also be controlled using a smartphone or tablet. The
application enables the one to select the cleaning mode, pause cleaning as well
as return to the charging station, schedule cleaning for a selected time that ma
differ for the individual days of the w
and also provides an overview of the cleaning time and the status of the robotic
vacuum cleaner
The application is freely available in the Apple App S or Google Play Store. This
link for this application is found in the picture part of this user’smanual
Note:
The robotic vacuum cleaner supports W
frequency band. If unsure about which standards are used by your
network and your router
or the manufacturer of the router
After downloading and installing it, the application will guide you through the
process for connecting the robotic vacuum cleaner to y
mobile data on your smartphone before connecting to the
CHARGING
AUT
As soon as the vacuum cleaner detects low voltage of the battery during operation,
it will automatically start to seek out the charging station. In order for it to find it and
dock, it needs to find the infrared signal transmitted by the charging sta
reason, we recommend leaving the char
power source and located in ac
LOCA
After docking in the charging station, the charging cycle will commence. A
charge takes approximately 4 t
power level of the battery
of operation.
During the charging process, the indicator lighD1 will alternately flash
red and blue.
When the battery is fully charged, the indicator light of button D1 will remain
permanently lit blue and the process will end automatically
In the event that the charging contacts are disconnected during the charging cycle,
the vacuum cleaner will move away fr
itself to resume the charging process
obstacle. In the event of apower outage, the char
will continue after the power supply is renewed
charging current is exc
charging cycle.
MANUAL CHARGING
If the vacuum cleaner is located away from the charg
battery voltage then button D1 will be lit red. PrC4 (HOME) on the
remote control.
and start automatic charging as described in the previous chapter
If the battery is so flat that the vacuum cleaner is unable to seek out the charging
station then it is necessary to dock the vacuum cleaner into the charging station
by hand. Grasp the vacuum cleaner and manually place it into the char
so that the charging contacts on the underside of the vacuum cleaner and the
charging contacts on the charging station are connected
connected, charging will start.
The vacuum cleaner can also be charged without using the charging station. Insert
the power adapter connector into socket A4 on the side of the vacuum cleaner and
insert the power adapter plug into amains socket.
CARING FOR THE BA
We rec
battery in acharged state.
Do not leave the vacuum cleaner standing fully charged or completely flat f
unnecessarily long period of time.
A
apermissible level and thereby cause irreparable damage to itself
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The vacuum
cleaner cannot
be turned on.
The battery is not inserted
correctly in the robotic
vacuum cleaner
Insert the batter
to the instructions in this
user'smanual.
The battery is flat. Charge the battery.
The vacuum
cleaner is on,
but it is not
vacuuming dust
and dirt.
The dust container is full. Empty the dust container
The dust filter is not properly
installed in the dust container
Properly install the dust filter
into the dust container
The vacuum
cleaner travels
only backwards
when it is turned
on.
The vacuum cleaner was
placed on afloor that is
too dark.
Move the vacuum cleaner to
alighter-coloured floor and
start it again.
An anti-fall sensor is dirty. Clean the anti-fall sensors.
The rotary
brushes are
deformed and
do not sweep up
dust and dirt.
The brushes are worn out.
Dip them in warm water to
renew their original shape.
Contact the vendor or service
centre and order new brushes.
VOICE MESSAGES
MESSAGE SOL
Turn on the vacuum cleaner
Dock the robot into the charging station.
If the vacuum cleaner was lifted, put it down
on the floor
Anti-fall sensors are dirty. Clean them.
Sensor sent afalse error
off and on.
Check that the bumper bar returns correctly
after being pushed in. If not, contact the service
department.
Overload of one of the rubber wheels, probably
due to dirty material or jamming on an obstacle.
Check that the wheels are clean and remove an
dirty material or obstacles.
