■This appliance may be used by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been
informed about how to use the appliance in asafe manner and understand the potential dangers.
■Children must not use this appliance or play with it. Keep this appliance and the power cord out of reach of children.
■Before connecting this appliance to apower socket, make sure the rated voltage stated on its rating label corresponds to the voltage in your power socket.
■Never use accessories, which have not been supplied with this appliance or which have not been explicitly recommended by the manufacturer for this type
of appliance.
■This appliance is designed for household use. Do not use it for commercial purposes, in industrial surroundings, or outdoors, or for purposes other than those
for which it is intended.
■Always place the appliance on an even, dry and stable surface. Do not place it on an electric or gas stove, in the vicinity of an open flame or appliances that
are sources of heat.
Do not put your hands into an area marked by this symbol. Otherwise injury could result when the multi-function head is tilted out and is not
properly locked in the top position.
■Never use multiple attachments at the same time.
■Before putting the appliance into operation, check that it is correctly assembled and that the multi-function head is tilted down in the horizontal position. For
safety reasons, this appliance is equipped with asafety mechanism that prevents the motor from being started when the multi-function head is tilted out.
■In the event that the multi-function head tilts out during operation, the appliance will automatically stop running. When the multi-function head is tilted to
the horizontal working position, the appliance will not automatically resume operation. To resume operation, it is necessary to set the speed control knob to
the OFF position and then re-select the desired speed.
■Do not touch rotating parts of the appliance and ensure that foreign items such as clothing, hair, etc. are kept away. An injury could occur or the appliance
could be damaged.
■In the event that an item, such as aspoon, falls into the bowl during operation, immediately set the speed control knob to the OFF position (stand-by mode),
and disconnect the power cord from the power socket. Wait until the rotating parts come to astop and then remove the item.
■If ingredients stick to the attachment or the sides of the bowl, turn the appliance off, disconnect it from the power socket, and wait until the rotating parts
come to astop. Use asilicone spatula to clean the attachment and the inside of the bowl. Then you can restart the appliance.
■Make sure that no hair, clothing or other items enter the feed tube of meat grinder while it is running. Do not put anything other than the ingredients that
are to be processed into the feed tube.
■Never use your fingers or other items to push ingredients through the meat grinder feed tube. For this purpose there is apusher included as an accessory.
■If the grating and slicing attachment is in operation, ensure that hair, clothing and other items are kept away from the feed tube. Do not put anything other
than the ingredients that are to be processed into the feed tube.
■Do not use fingers or other utensils to push ingredients through the feed tube of the grating and slicing attachment. For this purpose there is apusher
included as an accessory to this attachment.
■The grating and slicing attachment is not intended for processing frozen food, nut shells, coffee beans, hard fruit stones, etc.
Warning:
Incorrect use may lead to injuries.
■To prevent injury caused by sharp edges, be especially careful when handling the grinding blade of the meat grinder and the blade assembly of the blender.
Increased attention must also be paid when emptying out the blending jar, when removing the blade assembly from the blending jar, when removing the
grinding blade from the chamber, and when cleaning the appliance.
■Do not attempt to grind bones, nut shells or other hard ingredients.
■Hot liquids up to atemperature of 55 °C may be processed in the blending jar. Be especially careful when handling hot liquids. Hot steam or splashing hot
foods and liquids may cause scalding. Never start the blender without the lid properly seated in position. When processing hot liquids, do not remove the
inner cap during operation. Do not touch the hot surface. Use the handle to carry the blending jar when it is hot.
■The maximum continuous operating time is 10 minutes. Do not exceed the maximum operating time of 5 minutes when in the kneading mode and do not
exceed the maximum operating time of 2 minutes when using the blender. Before starting it again, allow the appliance to cool down for 30 minutes.
■Always turn off the appliance, disconnect it from the power socket when not be using it, when leaving it without supervision, and before assembling,
disassembling, cleaning or moving it. Prior to disassembling the appliance and replacing accessories or accessible parts that move during use, wait until all
moving parts come to astop.
■Clean it according to the instructions in chapter Cleaning and maintenance.
■Never wash the appliance under running water or submerge it in water or another liquid.
■Do not turn on the appliance when it is empty. Incorrect use of the appliance may negatively affect its lifetime.
■Ensure that the power plug contacts do not come into contact with water or moisture. Do not place heavy items on the power cord. Make sure that the power
cord does not hang over the edge of atable or that it is not touching ahot surface.
■Disconnect the power cord from the power socket by pulling on the plug, never pulling on the cord. Otherwise, this could damage the power cord or the
socket.
■If the power cord is damaged, have it replaced at aprofessional service centre. It is forbidden to use the appliance if it has adamaged power cord.
■To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs performed at an authorised
service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory performance or quality warranty.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Sencor STM 6377 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
